MCB Channel Dealers in Rajkot

• Size: 6300 x 1200 x 1000 mm

MCB Channel Roll Forming Machine Roll Forming Line with 14 station, 7 Gear Boxes & 10 H.P. electrical.Maximum sheet width that can be formed 350mm,Maximum sheet thickness in CRCA Strips that can be formed 3 mm(M.S.).

• width: 55mm

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands. The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.