Molding Machine Dealers in GIDC, Rajkot

• Automatic Grade: Fully Automatic

Our company is reckoned among the distinguished Manufacturers and Suppliers of Blow Molding Machines from Gujarat. The Blow Molding Machines offered by us are designed to blow 900 Bottles/Hr. The Blow Molding Machines offered by us are manufactured using quality-tested components in compliance with set industry norms. Stringent quality-tests ensure that only defect-free Blow Molding Machines reach the buyers. Bulk orders of the Machines are delivered by us as per the specific requirements of the buyers. Blow Moulding Machine : Type : Semi Automatic Air blowing M/c Model : PP-2000. Capacity : 600 to 900 Bottles/Hr of 1 Lit Volume Capacity to be blow : 1 liters, 1.5 liters, 2 liters Maximum product weight : 50 gms Maximum mould size : 150 MM Total power Consumption : 4.0 KW Heating Power : 3.4 KW Maximum Product diameter. : 100 MM Neck Diameter : 19 MM to 32 MM Volume of Product : 100 ML to 2000ML Air compressor : 12.5 HP Blowing pressure : 14 KG/CM2 Required Air : 35 CFM Required Man Power : 2 Person Weight of M/c : 600 K Includes following related equipments as under : Air compressor. 20 HP with 500 liters air tank 12 KW After cooler for dry air Chiller 1.5 ton for mould chilling Electric control board Total power required for Stretch Blow molding Machine 35 HP (25 KW)

MMB-L series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to four cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc. High Automatization High Intelligence:- The machine can be controlled through touch screen and running status is shown on it. High Quality:- Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality. High Speed: 2500BPH (2-cavity) 3800BPH (4-cavity). No Contamination:- Closed production zone, good self-lubrication system avoid contamination Low Cost: Low consumption of electricity, air and water. High Transparency: Easy maintenance, absolute safely, visual inspection, low noise. Settings: PLC colour display: OMRON(JAPAN) Pneumatic parts:FESTO(GERMANY) Controller of preform transfer:Servo motor National(JAPAN) Other electric parts are all world-famous brand Low Power Consumption. Available with Negative Pressure System also. Wet milling also available. Grinding element in different shape to application. Bottom Discharge Also Side Screen Opening Also With Star Type Hammer M.O.C. In MS/SS / SS Lining Features: Stable performance with advanced PLC. Conveying performs automatically with conveyor. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. Strong clamping force with high pressure and double crank links to lock the mold. Two ways of operating: automatic and manual. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. WLow cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. Contamination is avoided for the bottle body. Ideal effect of the chilling with the chilling system. Easy installation and starting Low rejection rate: less than 0.2 percent.

Versatile Machine ( 20 ml to 5000 ml neck size 19 mm to 150 mm )   These versatile machines can be used to manufacture different kinds of bottles with neck diameter of 20 mm to 150 mm. The bottle / jar capacity can range from 40 ml up until 5000 ml.   Mould Clamping Hydraulic mould clamping system to enhance power efficiency. It saves air consumption and hence reduces production cost. Unique mechanical lock system for positive locking. Heating Close loop heating system and auto chamber temperature control (to compensate variation in preform heating due to ambient temperature). Optional auto preform temperature control. Positioning of heaters is better, ensuring faster and simpler heating. Individual heater position is adjustable in both axes to achieve optimum heating. Air ventilation with controllable venting in heating chamber (for better heat penetration control). Start-stop index type oven to minimize variation in temperature of both preforms coming out of chamber at a time. Product Range Versatile range to produce 40 ml to 5000 ml bottle / jar. Neck diameter ranging from 20 mm to 120 mm. Due to hydraulic operations, mould can be stopped where required. In case of small diameter bottles, this increases production rate and reduces production cost. Safety Two hand operations (till mould close function is complete) to prevent accidents. ELCB in main supply for protection against electric shock. Individual MCBs for all heaters.  

• Brand Name: Patel Plastic Machinery MFRS.
• Capacity: 50 to 100 ton per day
• Material: Stainless Steel
• Frequency: 50-60 Hz
• Automation Grade: Fully Automatic
• Usage/Application: Plastic Bottle Cap

Problems.....? Drying Problem in Monsoon...? Dust is Deposited on the Washed Material...? It needs lots of space for drying...? Around 6 Persons are required for handling the waste of nearly 3 MT...? Around 5% of Material is lost due to manual handling...?   Here is the Solution... Suitable for PE Film (Grinded material) Moisture 2% to 3% Only.   Benifits : Only One Person Instead of 5 labour 3' x 6' Space & Mini.3 MT/day Drying Space Saving & Easy to Operate Drying Possible day/night and very help full in a Monsoon season. Water Separate with Squeezing System Material is Semi melt through one Heater & You can get densifier Materials (No need agglo after Drying Material)  

Tecmec machine crafts is a prominent tecmec machine crafts manufacturer & supplier based in india,.

Backed by a team of highly experienced professionals, we are involved in providing a wide range of plastic die Mold maker.

We are leading exporting company of articals rotomoulds from India.

We are offering blow moulds, we custom make the blow moulds according to the need of the customer.

• Size: 12"x12", 24"x24" to 36"x36"

H.M. Machine has rigid construction and easy for operation. now a days this is favorable in small & medium foundry also. The design of machine incorporates the central fabricated structure. The minimum force for lifting is required because of special lever type design. Special lock system is provide for lifting. So without manual lifting of handle the roads will not give any movement. Pin Lifting : Manual, Hydraulic, PneumaticSize : 12"x12", 24"x24" to 36"x36"

*  Maintains uniform liquidity of wax and can handle wax capacity of 1.5 kg.  *  Aluminum wax pot (Pot Size: 130 MM ID & 160 MM Depth) to ensure uniform heating. *  Digital temperature control. *  High quality heating wire to determine universal temp and longer service life. *  Air pressure wax injector ideal for heavy production wax injection. *  Leak proof nozzle keeps work area clean.  

electric injection molding machines, fastest injection molding machines

Wax Injector is second important unit in complete Jewellery casting Equipment. And as other gold making machinery it also require high precision for making wax and later wax tree.  In jewellery casting process wax pattern affects gold, silver ornaments directly. And the result of gold tree, silver tree or platinum tree is mirror image of wax tree. So as in Jewellery Casting Machine unit wax injector requires high precise control. Jewellery Casting Process depends highly on wax tree result and so wax pattern must be clear & fine. Jewellery making machinery (wax Injector) reflects result of wax patterns.    Our ample assortment of wax injector is in high demand due to its high efficiency and excellent performance. We are leading automatic wax injector manufacturers in India & supplying worldwide. We manufacture our vacuum wax injector from the high quality precise raw material & using advance technology machines. It has a solid and Special Metal tank which can store a large amount of wax at a time. It provides a constant and uniform pressure on the wax while injecting it. Our vacuum wax injector needs no maintenance due to its rugged construction and robust structure.

Injection screw, conical screw barrel, barrer screw

disposable drinking glasses molds, Thermoforming Mold 006

rotational moulds, septic tank mould, Rotomoulding Water Tanks

Plastic Injection Moulding Machines, Co-extrusion Blown Film Line

frp moulded equipment, Amusement Park Equipment, dust bin decorative

power saver moulding machine., Servo Motor, Servo Drive, sensor

Rubber Mould, Chequerd Tiles, Galicha Tiles, Paver Tiles

Blow Moulding Machines, Deep Drawing Press

rotational mould, cnc machined molds, Mild Steel Sheet, rotomoulding molds

Send mold machines, tube heaters, Band Heating Element, Heating Coils

Rotomolding Rotational Moulding Machine, Insert Moulding Machine

hand moulding press, foundry equipments, muller machine, Moulding Box

Blow Moulding, Plastic Raw Material, Injection Moulding, blister

Moulding Machine, Machine Tool

plastic moulding machines, bottle filling system