Molding Machine Dealers in Rajkot

• screw size: 92mm
• capacity: 12hp 30 kg
• compressor: 15 hp

50 litres capacity fully automatic blow molding machine with indigenously made kotas type, year 1999, screw size 92mm with grinder 12 hp 18 inches size, mixer 12hp 30 kg capacity, cutter 1 hp table, compressor 15 hp, mold 50L round drum and zerican 30L cooling tower 2 hp, along with necessary fixtures and accessories

We are renowned as Manufacturer, Supplier and Exporter of a comprehensive array of Automatic Horizontal Plastic Injection Molding Machine. Automatic Horizontal Plastic Injection Molding Machine comes in varied capacities of 18 ton to 150 ton. Automatic Horizontal Plastic Injection Molding Machine comes with a fixed van pump, plc controller, proportional valve, hydro motor, and ejector.   Standard Features : Color display plc system AC three phase induction motor High chrome platted step less tie bar Larger opening stroke mould capacity and tie bar distance to accommodate large moulds Graded casting toggle, brackets and links with harden pin and bush Multi stage injection with speed & pressure Multi stage mould opening and closing speed & pressure Automatic mould height setting system Gas nitride steels screw barrel and cavity S.S. Hopper with magnet grill Slide mechanism for hopper Ceramic heater Automatic lubrication systems in toggle tie bar Pid temperature controller for heaters Screw back pressure control valve Cold start protection Air valve Water manifold 4 inout Hydraulic ejector Hydro motor for opening mold thread Mcb control each heating zone Electrical and hydraulic (dump valve) interlock safety gate Ampere meter for heater Oil cooler ( water cooling type ) Energy meter Injection Unit : Multi stage injection with variable speed & pressure Liner transducer to control programmable injection position Programmable holding pressure profile Programmable multi stage refilling Single injection cylinder  unit Gas nitrated hardened screw and barrel Heater disconnection alarm Cold start protection Pre-suck back function Pid temperature control Sliding mechanism for hopper Screw back pressure control valve Clamping Unit : Case hardened pin & bush High tensile & hard chrome plated tie rods of larger diameters Hand pump lubrication system in toggle & tie bar Multi  stage mAutomatic Horizontal Plastic Injection Molding Machine Ould opening and closing speed & pressure Five point twin toggle locking system S.G. Iron casted toggle, brackets, links and platen Motorized mould height adjustment for quick mould change Hydraulic ejector with multiple ejecting, oscillatory ejecting & holding Electrical and hydraulic (dump valve) interlock safety gate

• POWER CONSUMPTION: 30-50 %
• HIGH PRODUCTION: 10-30%

We offer horizontal toggle type plastic injection moulding machine. Standard features : - high production capacity with high power saving. - automatic mould height adjustment. - hydraulic, electrical, mechanical safeties. - large tie bar distance & platen area. - user friendly controls cause easier to operate. - auto lubrication system with grease. - low noising level - mould safety system - low maintenance cost electrical accessories : - plc controller b & r system or streamline controls pvt ltd. - electric wiring with finolex wire r.r cable. - electric accessories:tcselectron. - temp. Controller - servo motor : phase motion (tde macno),germany. - drives : tde make in italy - linear scale:gefran. - hydraulic injector through the linear scale mechanical accessories : - hydraulic valve & pump yuken india ltd. Or rexorth bosch ltd. - stainless steel material hopper with magnet - hard chrome platen tie barwith double grinding and micro finishing. - mould plate again casting sg iron casting, word class. - en-41b gas nitride screw barrel withmixing zone. - radial piston hydro motor made inintermation. - phosphors bronze bushing. - refilling screw rpm counting system. - 5 stage injection pressure system

• Material: Aluminum
• Finishing: Chrome Finish
• Feature: Corrosion Resistance
• Shape: Rectangular
• Length: 6-7 Ft

• Size: Standard
• MOQ: As Per Client Requirement
• Condiion: New

We manufacture and supply Hydraulic Grinding Wheel Moulding Machine. The Hydraulic Grinding Wheel Moulding Machine which we are offering to the clients with milling facility that is ideal for Engine Rebuilders. Moreover, our range of Hydraulic Grinding Wheel Moulding Machine is capable of grinding and milling of cylinder blocks and is made of cast iron or aluminum alloy. Our Hydraulic Grinding Wheel Moulding Machine is suitable for stamping, bulking, punching and pressing applications. One can avail the Hydraulic Grinding Wheel Moulding Machine from us at market leading rates. Available In A Range Of Capacities From 5 to 500 tones Used In Applications Such As Stamping Bulking Punching Pressing

• Application: Small Plstic Mold
• Brand Name: Perfect
• Machine Type: Plunger Type
• Capacity: 125gm
• Raw Material: PP
• Clamping Way: Hydraulic
• Machine Weight: 900kg

We are offering auto mould machine. Products manufactured by us, as is under:

• Type: Rubber Injection Moulding Machine
• Certification: ISO 9001:2008
• Color: Black, ANY
• Voltage: 440V
• Condition: New
• Warranty: 1 Year
• Clamping Force: 1100-1500kn, 1600-2000kn
• Brand Name: bp-rcm
• Production Capacity: spm
• Plastic Type: silicon /nytral
• Style: Vertical
• Operation Mode: Automatic, Fully Automatic, Manual, Semi Automatic
• Power(W): 1-3kw, 3-5kw, 5-7kw, 7-9kw

Insert moulding machines Phosphorous bronzeultra bronze bushes with lubrication arrangement fitted in the moving platens ensures perfect alignment of the mould life.Mould safety arrangement with low pressure mould safety to avoid damage to the expansive moulds.

• Material: PVC
• Application: PVC Molding
• Thickness: 0-10 Mm, 10-20 Mm
• Weight: 0-5 Kg, 10-20 Kg, 5-10 Kg
• Pattern: Plain
• Condition: New
• Finishing: Polished
• Packaging Type: Corrugated Boxes, Paper Boxes, Plastic Boxes

• Voltage: 220V
• Condition: New
• Warranty: 1 Year
• Finishing: Polished
• Operation Mode: Fully Automatic
• Use: Industrial

• Voltage: 230 V AC
• Power Supplier: Single Phase
• Absorbed Power: 500 W
• Wax Capacity: 1 kg
• Temperature: 100° C
• Weight: 18.5 kg

We are offering automatic vertical injection molding machine, * plastic injection molding machine * * injunction molding machine generally operate manually by labels * s.m. Automation create a economical panel unit * which can control vertical injunction molding machine automatically * operate two, hydro lick jack * for more axis control different p.l.c. Are available features * can with six settable time * mode close * mode open * skb * inject * coaling * holding time and very more features are available which will update shortly.

• Automatic Grade: Fully Automatic

Our company is reckoned among the distinguished Manufacturers and Suppliers of Blow Molding Machines from Gujarat. The Blow Molding Machines offered by us are designed to blow 900 Bottles/Hr. The Blow Molding Machines offered by us are manufactured using quality-tested components in compliance with set industry norms. Stringent quality-tests ensure that only defect-free Blow Molding Machines reach the buyers. Bulk orders of the Machines are delivered by us as per the specific requirements of the buyers. Blow Moulding Machine : Type : Semi Automatic Air blowing M/c Model : PP-2000. Capacity : 600 to 900 Bottles/Hr of 1 Lit Volume Capacity to be blow : 1 liters, 1.5 liters, 2 liters Maximum product weight : 50 gms Maximum mould size : 150 MM Total power Consumption : 4.0 KW Heating Power : 3.4 KW Maximum Product diameter. : 100 MM Neck Diameter : 19 MM to 32 MM Volume of Product : 100 ML to 2000ML Air compressor : 12.5 HP Blowing pressure : 14 KG/CM2 Required Air : 35 CFM Required Man Power : 2 Person Weight of M/c : 600 K Includes following related equipments as under : Air compressor. 20 HP with 500 liters air tank 12 KW After cooler for dry air Chiller 1.5 ton for mould chilling Electric control board Total power required for Stretch Blow molding Machine 35 HP (25 KW)

• Brand Name: Jet Speed
• Pack Type: Drum
• Shelf Life: 3-5 Years
• Color: Yellow
• Physical State: Liquid
• Flash Point: 193 deg C
• Kinematic Viscoslty: 27-35 Degree C

This is C – frame, Vertical wax injection machine. The die/tool is placed on the work table. The Down stroking injection Nozzle is brought in contact with the injection port of the die.Wax is injected top-down into the die. This machine offers full pressure, flow – rate, temperature and dwell time controls.