Monoblock Pumps Dealers in Rajkot

• Type: Centrifugal Monoblock Pump
• Model: LDM-15
• H.P.: 2
• Pipe Size: 50x50cm
• RPM: 2880
• Head in Feet: 70
• Phase: 210V

Horizontal open well submersible pump set these single stage Centrifugal pump are ideally suitable for open well where there is wide fluctuation in water level. This works underwater & it rests at the well hence suction & priming problems do not arise. Prime mover motor is of wet type. Water lubricated, water cooled rewind able motor. The stator is wound with special water proof bi-axially oriented synthetic film insulated winding wires.Motor indection air filled. C.I.Cast Grade Motor Body EN-8 Grade Motor Shaft Pump Rigid cast iron impellor & volute casing provide good efficiency & long life. Compatible with low friction flexible hose pipes. Application Sprinkler & drip irrigation Pumping from sump for high rise building & industries River & canal lift irrigation Residential irrigation Plus point An ISI mark products. 30% lower power consumption. Excellent performance even at low voltage. High efficiency & low electricity cost. Easy availability of spare parts. Noiseless, easy to install, compact, requires minimum space.

>> Type : Vertical totally enclosed, compression ignition, four stroke cycle, Water cooled, cold starting, diesel engine monoset pump. >> Combustion Chamber : Direct injection in open type combustion chamber provided in an aluminium alloy piston with long stem multihole nozzle results into low fuel consumption and easy starting. >> Fuel System : High speed diesel is supplied to the fuel pump by gravity feed through an efficient replaceable paper element type main filter. >> Lubrication : Force feed lubrication is provided by plunger-type pump to large end bearing. Taper roller bearings need no seperate lubrication. All other parts are splash lubricated. Oil is filtered by suction strainer in sump. >> Governing : A sensible centrifugal type governor is mounted on camshaft gear wheel. Class B1 governing as per IS : 11170. >> Cooling : Engine cooling is done by water taken from mono pump itself >> Rotation : Standard rotation is clockwise when looking at the flywheel. >> Starting : The engine is designed for starting by hand cranking with starting handle. >> Exhaust System : A standard-type silencer is fitted for adequate silencing. >> Air Cleaner : Oil bath type air cleaner is fitted for efficient filtration. >> Standard Accessories : Starting handle, Exhaust Silencer, Air Cleaner & Spanner Set, Screw Driver.  

• Brand Name: ACUBE
• Driven Type: Electric
• Application: Water Supply
• Voltage: 220V
• Type: Single Phase Monoblock Pumps, Centrifugal Monoblock Pump
• Weight: 45-50kg
• Theory: Centrifugal Pump
• Warranty: 1year
• Country of Origin: India
• Pump RPM: 2800
• Color: GREEN

• Certification: CE Certified
• Application: Water Supply
• Weight: 10-15kg
• Power: 500W
• Driven Type: Electric
• Warranty: 1year

We are an eminent Domestic Monoblock Pumps Manufacturer, based in India. Matchless home pumps are exclusively admired by our honored clients. Durable home pumps are manufactured by our painstaking professionals. Moreover, we proffer unmatched products, which include domestic monoblock pumps, home pumps, domestic monoset pumps, monoblock pumps etc. Domestic Monoblock Pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as. Low cost. No centrifugal switch. Salient Features of Domestic Monoblock Pumps Uni-casing no air lock problem. Balanced and rigged construction. No centrifugal switch. Less operational and maintenance cost. Application Of Domestic Monoblock Pumps Industrial & public water supply schemes, Domestic water supply, Lift irrigation schemes. Drip/ Sprinkler Irrigation schemes, fire lighting, booster application, cooling water. Circulation, Ornamental fountain installation and air conditioning plants. Dewatering of mines, offshore, platforms, etc. Construction of Domestic Monoblock Pumps Wet squirrel cage induction type, water cooled, water lubricated motor. All bearings are water lubricated.

Suitable for portable applications Overhead storage water- tank filling Water curing at construction sites Gardening and small farm Irrigations Home Pressure boosting applications

High grade & close grained cast iron has a very smooth surface finish and coated with corrosion resistance primer. Class ‘A’ and class ‘B’ insulation used above 3 H.P. and upto 3 H.P. models respectively. All components are dynamically balanced and machined by CNC machines. Total 40 models available able to run in wide voltage variation. SKF Ball bearing are used for long lasting life and better efficiency Each pumpset is tested as per IS standard before dispatch All pump set are available with thermal overload protector (TOP) Improved design to ensure better efficiency and low noise

• Power Source: Electric
• Application: Agriculture
• Phase: Three Phase
• Motor Speed (RPM): 1440 RPM
• Maximum Head: 51 to 100 m, Less than 15 m
• Brand: Centuryply

• Brand Name: TRISHUL
• Power: 415
• Usage: AGRICULTURE & AQUACULTURE,Water
• Model Number: TCEM750
• Fuel: ELECTRIC
• BLACK ,BLUE: 30000

Centrifugal monoblock pump set 5.00 hp , 7.50 hp,10.00 hp size 65x50 ,80x65 ,80x80 ,x100x100 , 150 x 150 three phase -415 volte high efi motor.

We are the manufacturer of Shaft Parmik Motor Mono block Submersible Pump. Widely acclaimed for providing high quality products, we are known as the well-known Supplier in the market. In order to keep a strict check on the quality of the products, we maintain a streamlined quality management process.

• Material: Iron
• Motor Phase: Single Phase
• Country of Origin: Made in India
• Motor Horsepower: 0.5 HP
• Brand: WINSOR
• Power Source: Electric
• Motor Speed: 2800 RPM
• Frequency: 50 Hz
• Voltage: 220 V
• Suc x Del (mm): 25

V-3 Turbo Submersible Pumps have mixed or radial flow impellers that can work even after being submerged in water. The name of our company surfaces prominently among the trusted Manufacturers, Suppliers and Exporters of V-3 Turbo Submersible Pumps from Rajkot, Gujarat. The V-3 Turbo Submersible Pumps that we offer are manufactured using latest technology and tools. Our V-3 Turbo Submersible Pumps are light-weighted that makes them highly demanded in the market.

• Material: Cast Iron
• Country of Origin: India
• Warrenty: 1year
• Application: Automobile Industry
• Oem Ref. No.: 253420100124
• Tractor Model: Tata Turbo 407/608

• Type: Monoblock Pumps, Centrifugal Monoblock Pumps
• Certification: ISO 9001:2008, IS : 9079
• Application: Water Supply, AGRICULTURE
• Weight: 45-50kg
• Voltage: 220V
• Theory: Centrifugal Pump
• Automatic Grade: Manual
• Power: 1-3kw
• Driven Type: Electric
• Pressure: 20-25Bar
• Warranty: No Warranty
• Pump RPM: 2800
• Brand Name: YASH
• Country of Origin: India

Centrifugal Monoblock Pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as.Low cost., No centrifugal switch. Flotech Pumps Centrifugal Monoblock Pumps Available in › 0.5 HP to 1.0 HP in single phase., 1.0 H.P. to 2.0 H.P.Single PhaseThree Phase., Maximum head up to 60feet.,Maximum Discharge up to 420 LitMin., Able to run in Low Voltage.

• Country of Origin: Made in India
• Motor Horsepower: 1 to 3 Hp
• Brand: Loyal
• Motor Phase: Three Phase
• Pump Type: Centrifugal Monoblock
• Material: Stainless steel
• Power Source: Electric

Centrifugal Monoblock Pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as. Low cost. No centrifugal switch. Salient Features of Centrifugal Monoblock Pumps Uni-casing no air lock problem. Balanced and rigged construction. No centrifugal switch. Less operational and maintenance cost.   APPLICATION OF CENTRIFUGAL MONOBLOCK PUMPS Industrial & public water supply schemes, Domestic water supply, Lift irrigation schemes. Drip/ Sprinkler Irrigation schemes, fire lighting, booster application, cooling water. Circulation, Ornamental fountain installation and air conditioning plants. Dewatering of mines, offshore, platforms, etc. Construction of Centrifugal Monoblock Pumps Wet squirrel cage induction type, water cooled, water lubricated motor. All bearings are water lubricated. # Due to continuous efforts in improvements, information furnished above is subject to change without notice

• Material: Cast Steel
• Brand Name: doctor
• Pressure: High Pressure
• Packaging Details: Export worthy wooden-box
• Lead Time: 21 days
• Model Number: FMMP5 3 Stage
• Port: Mundra Port
• Theory: Centrifugal Pump
• Fuel: Diesel
• Feature: High Head
• Standard or Nonstandard: Standard
• Product name: Water Pump
• Application: Irrigation

Higson Power marking vide range of Openwell Monoset Pump to cater individuals need. Higson's openwell monoset pumps are quite in demand in domestic markets...