Nova Valves Dealers in Metoda, Rajkot

• Brand Name: Star

Being a quality conscious firm, our organization is involved in offering superior-grade Flanged Ends Ball Valve (3-Piece) to the clients. The offered valves are manufactured by our professionals in accordance with the international quality standards. Furthermore, we offer customized solution on our products as per the requirements of the clients. These valves are highly demanded by our clients and offered at most competitive prices.

• Size: 1/2" (20 mm)
• Brand Name: Javia
• Feature: Easy and Convenient to use, Anti corrosive and Leakage Proff

• Design & Manufacture: BS 5351 / API 6D/ANSI B16:34
• Body & Trim: Nace MR 01-75
• Casting Inspection: MSS SP-53, 55, 59, 94
• Testing: BS 6755 Part-I / API 598
• SW END: MSS SP-45 / API 6D

Ball valves shall have a spherical ball that moves in a plane perpendicular to the direction of flow. Full opening through ball valves shall have a circular bore in the spherical ball that allows a sphere to pass with a nominal size not less than ½" nominal diameter. Reduce opening through Ball valve shall have a semi circular bore in the spherical ball that allows a phere to pass with a nominal size not less than 10" nominal diameter, Unless otherwise specified by customer.Reduce opening valves with a non circular opening through the spherical ball shall be supplied with a minimum opening as agreed by customer. Pressure & Temperature Rating Valves manufactured by Reliable Valves shall be furnished in one of the following classes- PN 20 (class 150)- PN 50 (class 300)- PN 64 (class 400)- PN 100 (class 600)- PN 150 (class 900); - PN 250 (class 1500)- PN 420 (class 2500);Pressure-temperature rate is for above class rated valves shall be in accordance to ASME-B 16.34/EN 1092-1, Other than shall be determine for a material properties in accordance with the applicable design standard. Size Reliable Valves manufacture Ball valves for ½" to 60" Size   Design Features Anti-Static Device & Blowout ProofAnti-static device is formed through metal to metal contact, The stem is grounded against body and ball by separate anti-static spring to avoid from any electric spark. The blow out proof over size stem operate the valve safety even at high differential pressure. A bottom stem seal enabling replacement of gland packing even when valve may under pressure. Double Block & BleedSpring loaded floating seats maintain contact with the ball and provide tight shut off even at low pressure differential. Independent sealing of upstream and downstream sides facilitates draining of fluid from the body cavity, and thus the double block and bleed operation. Double Body SealingDouble seal combination of O-Ring and spiral wound gasket ensures perfect body joint sealing. Reliable Valves therefore meet or exceed the fugitive emission requirements across wide range of pressure and temperature applications. Valves are suitable for both above and underground installations. Multiple Stem SealingA triple sealing arrangement in stem area prevents leakage to atmosphere. It includes double sealing with O-rings and graphite seal at the top of stem housing. The blow out of proof stem enables positive stem retention. Sealant System & LubricantBall valve of size 6” & above shall be provided and emergency sealant injection system if required by customer. The lubricant & sealant fittings are located near seat area & at stem neck. The lubricant sealant entered via inject fitting & pass around the seat ring. The lubricant will lower the torque in valve & sealant will provide sealing for minor damage such as scratches on seal faces.Fire Safe DesignIn the event the fire soft insert gets burnt & spring loaded seats ensure metal to metal sealing.Corrosion Protection & PaintingAll castings are sand blasted & are subject to dewatering oil coats. Valves are thoroughly cleaned & primer coated with epoxy zinc phosphate primer, Followed by final coat of epoxy synthetic enamel applied in semi gloss finish.

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2, 1/2inch, 1inch, 2inch, 3/4inch, 3/8
• Type: Ball Valves
• Material: Carbon Steeel, Stainless Steel
• Certification: ISO 9001:2008
• Feature: Blow-Out-Proof
• Automation Grade: Manual
• Number Of Way: 2way
• Certfication: ISO 9001:2008 Certified

Forged Steel Ball Valves

Ball Valve, Non Toxic Steel Spiral Hose, HEX DEAD NUT, PIPE MALE TEE

We are offering ball valves.

We are well known for manufacturing and supplying of Ball Valve.

• Material: UPVC, CPVC < SWR
• Brand Name: Marcos

Ball Valves, Pvc Flexible Hose Pipe, PVC Suction Hose Pipe

Ball Valve, Bellow Seal Valve, Globe Valve, Gate Valve

Ball Valve, Aluminium Casting, exhaust system components

Ball Valves, Gate Valve, Globe Valve, Industrial Valve

Ball Valve, Butterfly Valve, Knife Gate Valve, Gate Valve, Globe Valve