Parekh Steels Metoda, Rajkot, Gujarat

\n These are used for deburring aluminum die castings, stripping paint, removing powder coatings without damaging substrates. Zinc cut wire shots usually have very low hardness but we can also make high hardness alloy zinc cut wire shots depending on customer requirement. \n

Size : 0.60mm To 2.50mm

Material : Zinc

Color : Grey

Condition : New

Country of Origin : India

We see a growing demand for better quality shots and grits. Awareness in respect to quality, consumption, timing and surface finishing is growing with end users. We, therefore import the best quality shots and grits from SINTO. End users data suggests a minimum of 40% reduction in consumption compared to other make shots and grits. Major improvements are observed in surface finish. Imported shots and grits conform to SAE J444, SAE J827, SAE J1993, ISO 11124-3, DIN 8201-2 and DIN 8201-3.We are the authorized importer and distributors of SINTO make steel shots and grits in India. We stock all sizes and grades of Steel Shots and Steel Grits. Usually, hardness in steel shots is in the range of 40-50 HRC, however higher hardness steel shots are also available on order. In case of Steel Grits, GH (65 HRC) and GP (40-50 HRC) grades are ready in stock. Other hardness such as GL (50-55 HRC) is available on order.

Feature : Casting Approved, Corrosion Proof

Color : Grey

Shape : Round

Application : Industrial

Material : Carbon Steeel

Size : 0-100mm

Condition : New

Size : 0-15mm, 15-30mm, 30-45mm

Diameter : 0-10mm, 10-20mm, 20-30mm

Thickness : 0-5mm, 5-10mm

Certification : ISI Certified, ISO 9001:2008 Certified

Feature : Accuracy Durable, Corrosion Resistance, Dimensional, Extra Stronger, Hardend & Temper

Surface Finishing : Polished

Country of Origin : India

Size : 0-15mm, 15-30mm, 30-45mm

Material : Stainless Steel

Diameter : 0-10mm, 10-20mm, 20-30mm

Shape : Round

Thickness : 0-5mm, 10-15mm

Certification : ISI Certified, ISO 9001:2008 Certified

Feature : Accuracy Durable, Corrosion Resistance, Dimensional

Surface Finishing : Polished

Country of Origin : India

\nStainless steel cut wire shots are used for shot blasting on investment castings, aluminum die castings, brass components and other metals on which carbon contamination is harmful.\n

Color : Grey

Material : Stainless Steel

Size : 0.40mm To 2.50mm

Condition : New

Surface Finishing : Power Coated

Country of Origin : India

Size : 0-15mm, 15-30mm

Diameter : 0-10mm, 10-20mm, 20-30mm

Shape : Round

Thickness : 0-5mm, 5-10mm

Certification : ISI Certified, ISO 9001:2008 Certified

Application : Bearing Use, Transmission Use

Feature : Accuracy Durable, Corrosion Resistance, Dimensional, Extra Stronger, Hardend & Temper

Surface Finishing : Polished

Country of Origin : India

TOSCELIK GRANUL uses the best alloy content scrap that it receives from the group companies in the low carbon steel shot production.Low carbon steel shot features increased impact absorbing capacity as the impact energy is distributed evenly on the shots.Structural properties of low carbon steel shot reaches increased hardness and thus offers better cleaning performance during usage.Since the production process does not require secondary heat treatment, perfect shots of bainitic structure are produced without cracks also resistant to impact and wear.

Color : Grey

Condition : New

\n Surface preparation industry is constantly evolving and demand for a better finish with cost effectiveness is growing. Improvising on our standard abrasives, we have come up with hybrid abrasives, which is an optimum mix based on surface finish requirements. This is a customized product designed in the most cost effective manner. \n   \n We have developed hybrid abrasives for very general shot blasting applications in foundries, forging, fabrication, investment castings, aluminum die castings and more. If we use any abrasive in isolation, it is bound to have its limitation; therefore we offer a premix of 2-3 abrasives depending on its application. \n

Size : 0-15mm

Material : Carbon Steel

Application : Shot Blasting

Color : Grey

Feature : Accuracy Durable, Corrosion Resistance

Surface Finishing : Power Coated

\nWe see a growing demand for better quality shots. Awareness in respect to quality, consumption, timing and surface finishing is growing with end users. We, therefore import the best quality shots from SINTO. End users data suggests a minimum of 40% reduction in consumption compared to other make shots. Major improvements are observed in surface finish. Imported shots conform to SAE J444, SAE J827, SAE J1993, ISO 11124-3, DIN 8201-2 and DIN 8201-3.\nWe are the authorized importer and distributors of SINTO make steel shots in India. We stock all sizes and grades of Steel Shots. Usually, hardness in steel shots is in the range of 40-50 HRC, however higher hardness steel shots are also available on order.\n

Condition : New

Feature : Accuracy Durable, Corrosion Resistance

Color : Grey

Thickness : 5-10mm

Material : Carbon Steel

Size : 0-15mm

Surface Finishing : Power Coated

Material : Carbon Steel

Size : 0.40 to 2.50 mm

Brand Name : Parekh Steels

Application : Shot Peening, Shot Blasting

Material : Copper

Brand Name : Parekh Steels

Size : 0.60 mm to 2.50 mm

Size : 0-15mm, 15-30mm, 30-45mm

Diameter : 0-10mm, 10-20mm, 20-30mm

Thickness : 0-5mm

Certification : ISI Certified, ISO 9001:2008 Certified

Application : Bearing Use, Transmission Use

Feature : Accuracy Durable, Corrosion Resistance, Dimensional, Extra Stronger

Country of Origin : India

Size : 0-100mm, 100-150mm, 150-200mm

Type : Cast Steel Shot

Certification : ISI Certified, ISO 9001:2008 Certified

Weight : 10-15kg, 15-20kg

Feature : Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality

Country of Origin : India

\nCarbon steel cut wire shots are widely used in foundry, forging and automotive industries for cleaning, deburring, descaling, shot peening and surface improvement. Carbon steel cut wire shots are available in three different hardness: 45-50 HRC, 50-55 HRC and 55-60 HRC with size ranging from 0.40mm to 2.50mm. Our cut wire shots conform to SAE J441, AMS 2431 and VDFI 8001.\n

Surface Finishing : Power Coated

Country of Origin : India

Hardness : 450-500 HV, 500-560 HV, 570-630 HV, 630-670 HV

Feature : Accuracy Durable, Corrosion Resistance

Material : Carbon Steel

Size : 0.40mm To 2.50mm

\n It is used for blast cleaning, surface finishing and deburring of aluminum castings and forgings. It is very durable and leaves no ferrous residue on component. \n

Size : 0.60mm To 2.50mm

Material : Aluminium

Color : Grey

Condition : New

Country of Origin : India

Shape : As Cut CCW (G1), DCCW (G2), SCCW (G3)

Hardness : 40-50 Hv Higher Hardness Available In Aluminum Alloy Grades.