Power Press Dealers in Atika Industrial Area, Rajkot

• Type: C Frame Press Machine
• Certification: ISO 9001:2008
• Weight: 100-200kg
• Voltage: 110V
• Condition: New
• Automatic Grade: Semi Automatic
• Driven Type: Electric
• Warranty: 1year

FRAME CONSTRUCTION: Mechanical C Frame Power Press fabricated from IS-2062 graded rolled steel plates. A frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to the frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. TABLE & SLIDE (RAM): Table and Slide are made of high-grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation. MAIN AND PINION SHAFT: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continues operation heavy three key ways. The single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine FLYWHEEL: Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running. Lubrication: Single shot lubricator provides oil to all the lubrication points, where necessary. Thus all bearing parts and guide surface etc.

• Power Source: Hydraulic
• Type: Mechanical Eccentric
• Voltage: 380V
• Function: Metal Processing
• Weight: Up to 10000
• Power W: 7.5KW

• Color: Green
• Capacity: 20 Ton
• Country of Origin: Made in India
• Material: Steel
• Application: Punching
• CNC or Not: Normal
• Power Source: Mechanical
• Automation Grade: Manual
• Load: 0-30 Ton

• Capacity: 3 ton to 250 ton
• Power Source: Hydraulic, Mechanical, Pneumatic
• Type: H Frame, C Frame, Pillar
• Automatic Grade: Semi-Automatic
• Voltage: 440 V
• Brand Name: Maruti
• Usage/Application: Multipurpose
• Material: Mild Steel
• CNC or Not: CNC
• Categories: Bending Machine
• Fly Wheel Diameter: 330-1170 mm
• Crank Shaft Diameter: 38-165 mm

We are offering power operated hydraulic press.

• Capacity in Tons: 110
• Overall Height: 3100
• Approx Weight: 6000

Elec. Control Panel & Production Counter Hydaulic Overload Safty Motorized Side with Break Motor & Die Height Indicator SMCFESTO' make FRL & Pneumatic Fittings Motorized Grease Lubrication Slide Knockout Device, 4 Way Cum Limit Switch Anti-repet Safety Device PLC Control System Misfeed Detector Socket Ross ToyokiJapan Make Solenoid Valve Variable Stroke Pneumatic Die Cushion Photo Safty Guards Variable Speed Anti-vibration Mounts

• Certification: CE Certified
• Weight: 100-1000kg
• Automatic Grade: Automatic
• Voltage: 400/440 volts
• Power: 3 phase
• No. of cycles: 50

We are one of the leading C Type Power Press, Manufacturers known widely not only in India but in the entire global arena for our strong and robust features and also because of the fine performance of our products. The C Type Power Press is a cut above the rest. Built with heavy steel fabricated plate having accurate cross ribbing for high quality and best performance this is in high demands by various known metal industries. Having apt lubrication system and gears which are of cast steel this Mechanical C Type Power Press are highly useful and gives performance which is out of the world. Features Cast steel gears which are of imported hobbing Robust build and strong features Resistant to abrasion or corrosion Details All dimensions are in mm Power supply 400/440 volts, 3 phase, 50 cycles Stringent quality checks for easy and smooth operation Options Dist. bed to ram change Dist. Centre to gap change Knock out system auto lubrication system

We have automated warehousing system to keep pace with the latest trends and to meet the clients' requirements. Our professionals make certain that the products are kept safely. As, our organizations is a suppliers of �H� Type Power Press; purchasers can place wholesale orders for it, and get them at the lowest prices.

  FRAME : The Frame is Fabricated From Steel Plates Heavy Wide And Cross Rib Borders. CLUTH : The Clutch is Round Key Type With Single And Continuous Strokes System. The Key And Cluth Ring is Made Of EN 31 Steel And its Parts Are Tempered. GEARS : Gears Are Of Steel Cast Fabrication.Gear Teeth Are Genereated By Precision Hobbing Machine. CRANK SHAFT : Crank Shaft is Made Of A Very Special Alloy Steel It Moves Very Easily In/Gun Metal Buses. TABLE & RAM : Table And Ram Are Made Of High Grade Heavy Duty Cast Iron & Property Seasoned. They Are Perfectly Aligned To Each Other To High Accuracy & precision Press Operation.  

• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Manual
• Warranty: 1 Year
• Power: 1-3kw
• Material: Metal

• Brand Name: Shailesh
• Brand Name: Shailesh
• Crank Diameter: 175 mm
• Floor to Top of Bed: 915
• WT KGS: 13000
• Stroke Adjustment: 13 - 175 mm
• Slide Adjustment: 70 mm
• Hole in Ram: 63 mm
• Hole in Bed: 228 mm
• L x W of Bed: 1117x762 mm
• Dist Bed to Ram: 508 mm
• Single Gear SPM: 30
• H P RPM G: 30/1440

• Crank Shaft Dia.: 48

Pillar type power press Gears are of steel cast fabrication. Gear teeth are generated by precision hobbing machine. Table and ram are made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned to each other to obtain high accuracy & precision press operation.

• Automatic Grade: Semi-Automatic
• Capacity: 3 Ton To 250 Ton
• Power: 0.5-25 HP
• Brand Name: Maruti
• Usage/Application: Industrial
• CNC or Not: CNC
• Frequency: 50 Hz
• Material: MS
• Phase: 3 Phase
• Fly Wheel Diameter: 330-1170 mm
• Crank Shaft Diameter: 38-165 mm

• Type: Power Press Machine
• Weight: 100-1000kg, 1000-2000kg, Etc
• Color: Blue
• Voltage: 220V, Etc
• Condition: New
• Automatic Grade: Automatic
• Power Source: Hydraulic
• Warranty: 1 Year
• Brand Name: MAYUR
• Power: 1-3kw, 3-5kw, Etc
• After-Sales Service Provided: YES

Catering to the requirements of several industries, we bring forth high performance Power Press Machine. The different types of Power Press Machine that we deal in include C Type Power Press and Pillar Type Power Press. These Power Press Machine are designed using the modern methodologies, in compliance with the industry set norms. Standard Accessories : Motor Pulley, Stud Driver, Die Clamp, Tie Rod, Motor Stand, Oil Pump with Manual System above 20 Ton, Knock out System. Extra Accessories : Electric Motor, V-Belt, Motor Starter, Table Drawer.

Wear adjustment is automatically compensated by little additional movements inbuilt in the air cylinder. Slides are counter balanced by pneumatic cylinders to eliminate any possibility of its running ahead of specified speed and also to contract possibility of rebound due to bottom ejector. All presses are equipped with pneumatically operated safety controls with provision of inching , single and continuous strokes control.

FRAME: The frame is made of steel construction and their heavy cross section and rigiddesign assure minimum deflection and accurate alignment cast iron legs will be supplied up to 30 ton press. CRANK SHAFT: Crank shaft materials are made of special alloy steel to withstand the effective loadsitted in busher with high accuracy. GEARS & CLUTCH: The gears are made of cast steel or fabricated and it teeth are generated by hobbing the clutch is provided of pin/rolling key type also it is rigid and well supported for the mass production clutch can gives continuous stroke. FLYWHEEL: The flywheel is made of high grade cast iron and is balanced for strong and releasing adequate energy for the pressing operations. LUBRICATION: An accurate lubrication system has been proved for lubrications the sliding surface and moving parts. TABLE & RAM: Table and ram are made of high grade heavy duty cast iron & properly seasoned. They are perfactly aligned to bach other to obtain high accuracy & precision press operation.  

'C' frame are fabricated out of mild steel plate generously designed to with stand heavy working conditions with minimum stretching and deflection. The fabricated members of the press are stress relived.Two plates are bound together with welded support and tie rods. Precise machining of the structural members is done after normalizing to get the required accuracy like parallelism between platen and bed, right angularity between bed and the moving platen. Applications : It's highly applicable for high production of small jobs.Special presses are also available with high ram speeds.

• Power supply: 400/440 volts, 3 phase, 50 cycles

The Mechanical Press Brake Machine is of robust fabricated steel construction of rigid and interlocked design. It is strain free and supports the ram and bed against undesired deflection under permissible loading condition. Made from steel plates of suitable thickness and machined for straightness and parallelism of the working surfaces. Ram is guided and supported throughout the stroke by accurately machined guide ways. Power is transmitted through two individual gear drives for uniform load distribution throughout the length.

• Capacity: 1-5 Ton
• Material: Steel
• Power Source: Mechanical
• Type: C Frame
• CNC or Not: Normal
• Color: Sky Blue - Pearl white
• Condition: New
• Brand Name: Shubham
• Model: SPP-2
• Air Supply (Bar): ---
• Bolster Thickness(millimetre): ---
• Type of Press: C-Frame Press
• Day Light Gap: ---

We r manufacturer & export mechanical power press 50 ton.

• Capacity: 50 TON
• Color: Blue
• Motor: 5 hp
• Categories: Press
• Model Name/Number: POWER PRESS MACHINE
• Load: 75 TON
• Automation Grade: Semi-Automatic

• Material: Mild Steel
• Capacity: 10 Ton
• Country of Origin: Made in India
• Automation Grade: Automatic
• Categories: Press

The Rolling Machine is Desgined for Gold & Silver Industries which is for making Sheet For Several Items Including Coins/Bars,Jewellery which are thinned out by passing through two steel rollers at the roughing mill to produce thick gold and silver strip. Finishing Rolling Gold Bars/coins are then thinned out a second time in the finishing mill. Skilled workers measure each of the rolled metal sheets produced by the finishing mill to ensure that the desired dimensions are reached with total precision. Heavy Duty Easy Use

Double Head Rolling Mill is a combined sheet and wire rolling mill. The rolls are made of high special steel hardened and ground finished. They are housed in extremely strong frame to overcome all the vibration and stresses developed during working. The gears are made of case hardened steel and immersed in oil for noiseless and smooth operation. Various components are standardized and are interchangeable. This assures easy maintenance. This machine has been provided automatic lubrication oil and emergency stop (this facility provide only by customer require) Reverse and forward movement. Extra side roller arrangement. This machine gives high production of good quality wire. It is similar in construction to our model. Constant lubrication is provided to ensure smooth running and long life. This machine has been provided automatic lubrication oil bath in the gear box. Goldsmith Double Head Roll Press Machine ( Size : 4" x 2.25")   approx ( Weight : 225 kg )   Goldsmith Double Head Roll Press Machine( Size : 5" x 2.50")   approx (Weight : 275 kg )   Goldsmith Double Head Roll Press Machine ( Size : 6" x 3")   approx (Weight : 390 kg )

• Capacity: 5 to 200 ton
• Material: Mild Steel
• Usage/Application: Industrial
• Load: 30-60 Ton
• Power Source: Hydraulic
• Automation Grade: Automatic

We are offering press brake, power press. frame :- the frame is made frome steel construction and their haevy cross section and rigid design assured minimum deflection and accuratealignment cast iron legs will be supplied up to 30 ton press. crank shaft :- crank shaft made form special alloy steel to with stand the effective load, it is fitted with gun metal bushes for smooth working with highaccuracy. gears & clutch :- the gears are made from cast steel or fabricated and its teeths are generated by hobbing. The clutch is provided of pinrolling key type, it is also rigid and well supported for the mass production. Clutch can give continuous stroke. flywheel :- the flywheel is made from gradead cast iron for strength and is balanced for efficient and releasing adequate energy forthe pressing operations. lubtication :- a lubtication system has been provided for lubtication the sliding surface and moving parts. table & ram :- table and ram are made from high grade heavy duty cast iron & properly seasoned. The are perfectly aligned to match each other to obtain high accuracy & precision prees operation.

• After-Sales Service Provided: Engineers available to service machinery overseas
• Brand Name: KAWA
• Power Source: Mechanical
• CNC or Not: Normal

Goldsmith Roll Press Machine

Sheet Metal Machine, Mechanical Shearing Machines