Power Press Dealers in Shapar, Rajkot

• Brand Name: Rajshakti
• Condition: New
• Automatic Grade: Semi Automatic, Manual
• Power Source: Mechanical
• Country of Origin: India

Mechanical C Frame Power Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

Extra rigid Cross Shaft Power Presses from 110 to 300 Tonne Salient features: 1. Rigid and robust Frame Structure with less deflection. 2. Pneumatically operated Single Disc Combine Clutch and Brake to ensure minimum response time and enhance operation safety and noiseless operation. 3. 6 Points Extra long GIBS fitted with Sintered Bronze Linings gives long life accuracy 4. Turcite-B Linear Motion in Slides for friction and vibration free smooth running and reduce worn out of slides. 5. Hardened and ground gear will give smooth and silent operation. 6. Built in Hydraulic Over Load Safety will gives safety against overload situation and stop the machine immediately 7. Dual Solenoid Valve enhance safety against failure of single valve. 8. Motorised Slide adjustment reduce labor and increase yield. 9. Digital Die Height Indicator increase accuracy of operation 10. Easy to operate PLC panel with HMI in front panel for displays of faults, Batch Counter, Preset Counter, Time Totalize, Lubrication Counter, Anti Repeat Timer. 11. 11. Motorised Lubrication will enhance smooth operation and reduce labor time. 12. 12. Best option for Single and Progressive Die Application in Blanking, Piercing, Bending, Forming, Inter Linking with transfer unit. 13. 13. Wide Bolster and Slide Area

• Capacity: 300 Tonne
• Stroke Length: 140mm
• Fix Stroke: 250mm
• Bolster Thickness: 180mm

Applicaton :   The Ultimate Possible Resistance To Slide Tipping & Off Center Loading These guides are designed with extra length & surface area to provide best possible resistance to slide tipping caused by off center loading in the die and most suitable for highly precise pressing applications. This increases tool life. Mentioned below are some other distinct features with details :   Programmable Logic Control (PLC) As per standards we provide PLC with an inbuilt display system, which shows faults and gives remedy as well. It helps for easy maintenance and reduced break down time.   Cam Limit Swith Driven Through Gear Cam Limit Switch driven through Gears instead of Sprockets & Chain provides accurate signals to PLC. No changes of double stroking takes place thus providing an optimum quality.   Miss Feed Sockets Miss feed sockets are provided to turn the machine with an automation line.   Pneumatics All pneumatic items like FRL, Air Regulators, and Fittings are SMC which make duly fitted process in RITTAL. All pressure gauges are glycerine filled and are visible from front of the machine. Pressure Switch Drain Cock and Safety Valves are provided wherever required. Standard air outlets are provided for pneumatics tools.   Counter Balancer Lubrication We provide all the machines with manual lubrication device for Counter Balancing System and the life of cylinders and seal increases as a result.

• Capacity: 05 TON TWO 400 TON
• Power Source: Hydraulic
• Capacity: 05 TON TWO 400 TON

We are the leading supplier of this products.

We hold enough expertise to fabricate high-performance Roll Press Machines (without cover regular) and make them available to various parts of the country and abroad in a time-efficient manner. We are counted among the premier Manufacturers, Exporters, and Suppliers of Roll Press Machines from Gujarat, India. We fabricate them from high-grade components and materials, in compliance with the standards. And the machine is made obtainable in varying specifications, as per the client’s requirements.  

We offer 10 ton h type or pillar type power press. Our organization hold expertise in providing superior grade 10 ton piller type power press to our precious customers. Our offered piller type power press is widely appreciated by our customers, which are situated all round the nation. Known for its best quality, clients can avail this power press at industry leading prices from us.

Keeping ourselves abreast of sophisticated process technology, we manufacture high standard cross shaft presses, that are popular amidst our clients for uncompromising quality and high functionality. These presses are available in a rigid steel configuration, which keeps the stress & deflection within the permissible limits and ensures the maximum strength even unber the highest load. Shaft of these presses is ground finished on bearing surfaces. These presses undergo testing prior to dispatch to our clients. We also entertain the clients’ queries to customize our range as per their specifications. Features :The salient features of our cross shaft presses are mentioned below:    High  Performance  Resistant to corrosion  Low power consumption  High tensile strength Easy maintenance Cross Shaft Power Presses :We manufacture engineered pressing machines, cross shaft machine with following features. Features :Fully enclosed drive Front stroke adjustment Large slide face & bed area Hhr Gears operating in oil bath Compact & rigid construction Widely spaced long gibs hold slide in accurate alignment

The company is a well-recognized Manufacturer and Supplier of highly efficient Pillar Type Power Press Machine. Our Pillar Type Power Press Machine is available in different tons such as 10 ton, 20 ton, 30 ton, 50 ton, 75 ton, and many more so as to suit the needs of the clients. Pillar Type Power Press Machine that we provide is highly accredited for features like excellent functionality, longer functional life, user-friendly operation and low maintenance.

We are offering mechanical power press machine. Capacity 100 ton stroke adjustment 13-127 depth of throat 320mm dist bed to ram 450mm length & width of bed 900x640 mm hole in bed 190 mm hole in ram 50mm crank shaft diameter 127mm fly wheel diameter 813mm stroke per minute 30 motor (siemens company) 10 hp weight approx in kgs. 5400

• Voltage: 220-440 V
• Power: 2-20 HP
• Material: Mild Steel
• Frequency: 50 Hz
• Phase: Three Phase
• Brand Name: Perfect
• Automatic Grade: Automatic
• Max Force or Load: 40 Ton

• Material: Mild Steel
• Usage: Industrial
• Capacity (Ton): 100-500
• Automation Grade: Semi Automatic
• Voltage (V): 440 V
• Return Force (kN): 500 kn
• Control Type: Non-CNC

• Finishing: Polished, Powder Coated
• Machine Weight: 100-1000kg, 2000-3000kg, 4000-5000kg
• Packaging Type: Wooden Box
• Pressure: Medium Pressure, High Pressure
• Power: 1-3kw, 3-6kw, 6-9kw
• Usage: Sheet Bending, PET Bottles, Used Cloth
• Feature: Long Life, High Performance, Easy To Operate
• Bed Size in mm: 300mm, 400mm
• Brand Name: OUNCE
• Material: Mild Steel
• Shape: Rectangular
• Voltage: 220V
• Condition: New
• Phase: Three Phase
• Country of Origin: India
• Operating Mode: Semi Automatic
• Corrosion Resistance: Yes
• Machine Structure: Vertical
• Is It Variable Speed: Yes

• Condition: New
• Power Source: Electric
• Type: Mechanical, Hydraulic & Pneumatic
• Phase: Three Phase
• Range: 10mton to 250mton

Interlocked Fully Steel Plate Body Heavy Duty Gap Frame & H Frame Precision Power Press.All Shafts Made From Carbon Steel Material And Precision Grinding Size Machine

• Country of Origin: India
• Type: C Type Power Press Machine
• Warranty: 1 Year
• Brand Name: Vishwakala
• After-Sales Service Provided: Yes

Frame The Frame Is Fabricated From Solid Steel Plates With Heavy Cross Ribbings. Chute Clutch Design is Rolling Key Type Clutch & Its is made from O.H.N.S. Steel And Its Other Parts Are Tempered. Gears Gears Are Made From Steel Casting And Helical Teeth Cutting The Hole Of The Gears Is Machined In Degree So That It Does Not Loose While In Working Press. Lubrication The Oil Cups Are Fitted On All The Moving Parts To Provide Them A Nice Lubrication. Cran Kshaft The Crank Shaft Is Made Of A Very Special Alloy Steel And It Moves Very Easily On Gunmetal Bush. Adjustable The Adjustable Stroke Features Enables The Press To Meet. Stroke All Kinds Of Operations ; Even With A Small And Short Stoke. Brake The Brake Is Compensated By Spring Along with Out Centred Plate System And Hence, It Works According To Timing Adjustment. This Enables To Lengthen The Life Of The Brake. Ram Slide Made Of Seasoning High Grade Casting And Bearing Surfaces Are Hand Scraped. Temper Parts Are Tempered Where Tempering Is Felt Necessary. Standard Accessories Die Clamp, Motor Pully, Stud Driver, Motor Stand. Extra Fitting Oil Pump, Knock Out System, Tie Rod Etc.

Ultimate and latest solution for make component like circle, blanking, embossing, bending, cutting of sized or coil sheet, We offer C & H type Presses from 50 Ton to 600 Ton with optional of Mechanical, Pneumatic Clutch. Presses are required by all industries like Automobile, Railways, Defence, House Hold appliance, Infrastructure, Power & telecommunication etc.

• Type: C Frame Press Machine
• Certification: ISO 9001:2008
• Weight: 100-200kg
• Voltage: 110V
• Condition: New
• Automatic Grade: Semi Automatic
• Driven Type: Electric
• Warranty: 1year

FRAME CONSTRUCTION: Mechanical C Frame Power Press fabricated from IS-2062 graded rolled steel plates. A frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to the frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. TABLE & SLIDE (RAM): Table and Slide are made of high-grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation. MAIN AND PINION SHAFT: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continues operation heavy three key ways. The single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine FLYWHEEL: Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running. Lubrication: Single shot lubricator provides oil to all the lubrication points, where necessary. Thus all bearing parts and guide surface etc.

• Certification: CE Certified, ISO 9001:2008
• Weight: 100-1000kg, 1000-2000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1-3kw, 3-5kw, 5-7kw
• Warranty: 5 Years
• Country of Origin: India

It has a Single Point Suspension and is a Non-Inclinable Single Action Press that is Steel Plate Fabricated. The Construction is Duly Stress Relieved with 6 Point Gibbing of Slide. The machine is fitted with Pneumatically Operated Combined Single Disc, Friction Clutch & Brake. More dynamic and has even better accuracy. SEW Presses are the Power Presses which raise the standards of precision & rigidity.

Mechanical power press c type 5 to 200 ton capacity capacity 50 ton crank shaft dia. 95 mm stroke adjustment 13 to 100 punch hole in ram 51 length & width of bed 650x400 dist.between bed to ram 350 fly wheel diameter 560 stroke per minute 50 h.p. Required 5 gear type ( std.model *) double weight ( approx.) 2300kg

• Country of Origin: India
• Type: Hydraulic Power Press
• Brand Name: YUVA
• Certification: ISO 9001:2008 Certified
• Material: Mild Steel
• Color: As Per Requirement
• Condition: New
• Phase: Three Phase
• Warranty: 1 Year
• Operating Mode: Automatic
• Corrosion Resistance: Yes
• Machine Structure: Vertical
• Pressure: High Pressure
• Capacity: 40-1500 Tons
• Feature: Long Life, High Performance, Easy To Operate
• Bed Size in mm: 300 - 1500 MM
• Working Pressure: 250 Kg/cm2
• Color: as per requirement
• Name: H frame hydraulic press

• Capacity: 50 TO 200 TON
• Material: Mild Steel
• Features: High functionality, Minimum maintenance, Robust design
• Categories: Press
• Usage/Application: Industrial
• Model Name/Number: MAYANK BRAND

Awelable in various size & model And also as per your requarmet For your special needs.

• Frame:: The frame is made of heavy strength steel fabricated plate with suitable cross ribbing for quality & accuracy with precision performance.
•  :  
• Crank Shaft:: Crank Shaft is made of special alloy steel and fitted in with gun metal bushes for accurate alignment.
•  :  
• Clutch:: The clutch is of rolling key type & it is very rigid & better supported. The clutch gives continuous stroke for mass production.
•  :  
• Brake:: The Brake is powerful and works on top dead centre and compensated by spring.
•  :  
• Fly Wheel:: The Fly Wheel is made of high grade cast iron & it is balanced for storing & releasing adequate energy for the operations.
•  :  
• Gears:: Gears are of cast steel or fabricated. Gear teeth are generated by imported hobbing.
•  :  
• Lubrication:: Lubrication system is sufficient & accurate for lubricating in all bearing surfaces, sliding surfaces and moving parts without wasting of oil.
•  :  
• Table & Ram:: Table & Ram are made of heavy duty high graded cast iron with seasoned. Both are perfectly aligned to each other to obtain quality job.

• Capacity: 3 ton to 250 ton
• Power Source: Hydraulic, Mechanical, Pneumatic
• Type: H Frame, C Frame, Pillar
• Automatic Grade: Semi-Automatic
• Voltage: 440 V
• Brand Name: Maruti
• Usage/Application: Multipurpose
• Material: Mild Steel
• CNC or Not: CNC
• Categories: Bending Machine
• Fly Wheel Diameter: 330-1170 mm
• Crank Shaft Diameter: 38-165 mm

CapacityIn Tonnes Bed Size Throat Day-Light Stroke Motor H.P. 5 235x235 115 210 100 2 15 300x300 150 225 150 3 25 375x375 200 300 175 3 40 450x450 250 350 175 3 60 525x525 300 400 200 5 75 600x600 325 450 200 5 100 675x675 350 500 200 5 150 750x750 375 550 225 7.5 200 750x800 400 600 225 10 OVERALL DIMENSIONS ARE IN mm, APPROXIMATE & MAY BE CHANGED WITHOUT PRIOR NOTICE.

Mechanical Power Press is of all steel construction, fabricated from steel plates with suitable cross ribbings. Presses upto 30 ton will be supplied with C.I. legs. Above 30 ton presses will be supplied with double C. Above 40 ton presses will come with steel legs. Proper alignment of the frame is ensured by machining of the cut steel plates before welding.

• Country of Origin: Made in India
• Voltage: 240 V
• Capacity: 1 Ton/Day
• Automation Grade: Automatic
• Material: Gold and silver
• Frequency: 50 Hz
• Surface Finish: Paint Coated

• Brand Name: Vivek
• Material: MS
• Power: 5.5 (w)
• Weight: 0.6 ton
• Load (Ton): 60-90 Ton
• Power Source: Mechanical
• Voltage (Volt): 350 V
• Phase: Three Phase
• Nominal Force: 6 mm