Power Press Dealers in Veraval, Rajkot

Mechanical power press c type 5 to 200 ton capacity capacity 50 ton crank shaft dia. 95 mm stroke adjustment 13 to 100 punch hole in ram 51 length & width of bed 650x400 dist.between bed to ram 350 fly wheel diameter 560 stroke per minute 50 h.p. Required 5 gear type ( std.model *) double weight ( approx.) 2300kg

We are a manufacturer of "fmt" Brand Power Press Machine C-Type & H-Type. We offer great sales & services on every machine. We sell our customers are quite satisfied with the product quality, timely delivery. Kindly contact us. View complete details.

We are offering high speed precision power press from 125 & 200 tonne salient features: 1. Rigid and robust straight side frame design makes it angular deflection free and increase accuracy for progressive die. 2. Zero angle deflection of frame will reduce cost of tooling and maintenance for long life. Product range: hsd series 3. Pneumatically operated single disc combine clutch and brake to ensure minimum response time and enhance operation safety and noiseless operation. 4. 8 points extra long gibs fitted with sintered bronze linings gives long life accuracy 5. Turcite-b linear motion in slides for friction and vibration free smooth running and reduce worn out of slides. 6. Bearing temperature sensor will alarm for over heat and stop the machine. 7. Hardened and ground gear will give smooth and silent operation. 8. Built in hydraulic over load safety will gives safety against overload situation and stop the machine immediately 9. Dual solenoid valve enhance safety against failure of single valve. 10. Motorised slide adjustment reduce labor and increase yield. 11. Digital die height indicator increase accuracy of operation 12. Easy to operate plc panel with hmi in front panel for displays of faults, batch counter, preset counter, time totalize, lubrication counter, anti repeat timer. 13. Plunger guiding system allow precise adjustment of slide running clearance and enhance parallelism and squareness of travel accuracy and tooling life 14. Wide slide and bolster area

Keeping ourselves abreast of sophisticated process technology, we manufacture high standard cross shaft presses, that are popular amidst our clients for uncompromising quality and high functionality. These presses are available in a rigid steel configuration, which keeps the stress & deflection within the permissible limits and ensures the maximum strength even unber the highest load. Shaft of these presses is ground finished on bearing surfaces. These presses undergo testing prior to dispatch to our clients. We also entertain the clients’ queries to customize our range as per their specifications. Features :The salient features of our cross shaft presses are mentioned below:    High  Performance  Resistant to corrosion  Low power consumption  High tensile strength Easy maintenance Cross Shaft Power Presses :We manufacture engineered pressing machines, cross shaft machine with following features. Features :Fully enclosed drive Front stroke adjustment Large slide face & bed area Hhr Gears operating in oil bath Compact & rigid construction Widely spaced long gibs hold slide in accurate alignment

C Type Power Press Machine, Mechanical Power Press, Mechanical Press

• Brand Name: Riconsa
• Categories: Bending Machine, Press
• CNC or Not: Normal
• Automation Grade: Automatic
• Type of Press: C-Frame Press

We are the leading manufacturers, exporters and supplier of this products.

• Material: Mild Steel
• Power Source: Hydraulic
• Automatic Grade: Semi-Automatic
• Brand Name: Rajshakti
• Capacity: 50 Ton
• Type Of Press: C-Type
• Surface Finishing: Powder Coated
• Stroke Length: 90 mm

• Condition: New
• Power Source: Electric
• Type: Mechanical, Hydraulic & Pneumatic
• Phase: Three Phase
• Range: 10mton to 250mton

Interlocked Fully Steel Plate Body Heavy Duty Gap Frame & H Frame Precision Power Press.All Shafts Made From Carbon Steel Material And Precision Grinding Size Machine

We are offering power press. rt power press are designed and developed through years of experience in sheet metal working machines. Rt power press are widely accepted in industries for continuous production runs, and in areas requiring accuracy and repeatability coupled with high production.

• Certification: CE Certified, ISO 9001:2008
• Weight: 100-1000kg, 1000-2000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1-3kw, 3-5kw, 5-7kw
• Warranty: 5 Years
• Country of Origin: India

• Capacity: 50 TO 200 TON
• Material: Mild Steel
• Features: High functionality, Minimum maintenance, Robust design
• Categories: Press
• Usage/Application: Industrial
• Model Name/Number: MAYANK BRAND

It has a Single Point Suspension and is a Non-Inclinable Single Action Press that is Steel Plate Fabricated. The Construction is Duly Stress Relieved with 6 Point Gibbing of Slide. The machine is fitted with Pneumatically Operated Combined Single Disc, Friction Clutch & Brake. More dynamic and has even better accuracy. SEW Presses are the Power Presses which raise the standards of precision & rigidity.

• Finishing: Polished, Powder Coated
• Machine Weight: 100-1000kg, 2000-3000kg, 4000-5000kg
• Packaging Type: Wooden Box
• Pressure: Medium Pressure, High Pressure
• Power: 1-3kw, 3-6kw, 6-9kw
• Usage: Sheet Bending, PET Bottles, Used Cloth
• Feature: Long Life, High Performance, Easy To Operate
• Bed Size in mm: 300mm, 400mm
• Brand Name: OUNCE
• Material: Mild Steel
• Shape: Rectangular
• Voltage: 220V
• Condition: New
• Phase: Three Phase
• Country of Origin: India
• Operating Mode: Semi Automatic
• Corrosion Resistance: Yes
• Machine Structure: Vertical
• Is It Variable Speed: Yes

• Country of Origin: India
• Type: Hydraulic Power Press
• Brand Name: YUVA
• Certification: ISO 9001:2008 Certified
• Material: Mild Steel
• Color: As Per Requirement
• Condition: New
• Phase: Three Phase
• Warranty: 1 Year
• Operating Mode: Automatic
• Corrosion Resistance: Yes
• Machine Structure: Vertical
• Pressure: High Pressure
• Capacity: 40-1500 Tons
• Feature: Long Life, High Performance, Easy To Operate
• Bed Size in mm: 300 - 1500 MM
• Working Pressure: 250 Kg/cm2
• Color: as per requirement
• Name: H frame hydraulic press

• Material: Mild Steel
• Usage: Industrial
• Capacity (Ton): 100-500
• Automation Grade: Semi Automatic
• Voltage (V): 440 V
• Return Force (kN): 500 kn
• Control Type: Non-CNC

• Country of Origin: India
• Type: C Type Power Press Machine
• Warranty: 1 Year
• Brand Name: Vishwakala
• After-Sales Service Provided: Yes

Frame The Frame Is Fabricated From Solid Steel Plates With Heavy Cross Ribbings. Chute Clutch Design is Rolling Key Type Clutch & Its is made from O.H.N.S. Steel And Its Other Parts Are Tempered. Gears Gears Are Made From Steel Casting And Helical Teeth Cutting The Hole Of The Gears Is Machined In Degree So That It Does Not Loose While In Working Press. Lubrication The Oil Cups Are Fitted On All The Moving Parts To Provide Them A Nice Lubrication. Cran Kshaft The Crank Shaft Is Made Of A Very Special Alloy Steel And It Moves Very Easily On Gunmetal Bush. Adjustable The Adjustable Stroke Features Enables The Press To Meet. Stroke All Kinds Of Operations ; Even With A Small And Short Stoke. Brake The Brake Is Compensated By Spring Along with Out Centred Plate System And Hence, It Works According To Timing Adjustment. This Enables To Lengthen The Life Of The Brake. Ram Slide Made Of Seasoning High Grade Casting And Bearing Surfaces Are Hand Scraped. Temper Parts Are Tempered Where Tempering Is Felt Necessary. Standard Accessories Die Clamp, Motor Pully, Stud Driver, Motor Stand. Extra Fitting Oil Pump, Knock Out System, Tie Rod Etc.

We hold enough expertise to fabricate high-performance Roll Press Machines (without cover regular) and make them available to various parts of the country and abroad in a time-efficient manner. We are counted among the premier Manufacturers, Exporters, and Suppliers of Roll Press Machines from Gujarat, India. We fabricate them from high-grade components and materials, in compliance with the standards. And the machine is made obtainable in varying specifications, as per the client’s requirements.  

• Voltage: 220-440 V
• Power: 2-20 HP
• Material: Mild Steel
• Frequency: 50 Hz
• Phase: Three Phase
• Brand Name: Perfect
• Automatic Grade: Automatic
• Max Force or Load: 40 Ton

Ultimate and latest solution for make component like circle, blanking, embossing, bending, cutting of sized or coil sheet, We offer C & H type Presses from 50 Ton to 600 Ton with optional of Mechanical, Pneumatic Clutch. Presses are required by all industries like Automobile, Railways, Defence, House Hold appliance, Infrastructure, Power & telecommunication etc.

• Type: C Frame Press Machine
• Certification: ISO 9001:2008
• Weight: 100-200kg
• Voltage: 110V
• Condition: New
• Automatic Grade: Semi Automatic
• Driven Type: Electric
• Warranty: 1year

FRAME CONSTRUCTION: Mechanical C Frame Power Press fabricated from IS-2062 graded rolled steel plates. A frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to the frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. TABLE & SLIDE (RAM): Table and Slide are made of high-grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation. MAIN AND PINION SHAFT: Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continues operation heavy three key ways. The single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine FLYWHEEL: Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running. Lubrication: Single shot lubricator provides oil to all the lubrication points, where necessary. Thus all bearing parts and guide surface etc.

Cross Shaft Power Press bnx Series is applicable for light, thin material for single and continuous operation in blanking, piercing, bending, forming. The ring frame construction eliminates angular deflection and provides an increased precision for progressive die application. This reduces the maintenance costs on tooling. The Cross Shaft Press bnx series has a rigid frame construction, less deflection, high torque clutch and brake and forged rigid cranks which ensure press life and accuracy. Motorized Grease lubrication with sensor ensures the operation reliability. User friendly design and 24VDC electric control system enables the accessories to attach easily. The larger 6 point gibes are centered in slide and provides better resistance to off center loads. The user friendly design and 24VDC electric control system allows for easy integration of auxiliary equipments and automation.

• Brand Name: Vivek
• Material: MS
• Power: 5.5 (w)
• Weight: 0.6 ton
• Load (Ton): 60-90 Ton
• Power Source: Mechanical
• Voltage (Volt): 350 V
• Phase: Three Phase
• Nominal Force: 6 mm

• Material: Mild Steel
• Country of Origin: Made in India
• Length: 150Cm -400Cm
• Material of Roller: Mild Steel
• Product Type: Textile
• Coating: Rubber Band Wrapping with Rubber Adhesive
• Usage/Application: Rapier Looms- Airjet Loom
• Brand: Pragati Engineers
• External diameter: 60mm to 100mm
• Wall Thickness: 3mm to 6mm

We are offering power operated hydraulic press.

The frame is of all steel construction, fabricated from steel plates with suitable cross ribbings. Presses upto 30 ton will be supplied with C.I. legs. Above 30 ton presses will be supplied with double C. Above 40 ton presses will come with steel legs. Proper alignment of the frame is ensured by machining of the cut steel plates before welding.he clutch is of pinrolling key type. The clutch is rigid and well supported. The clutch gives continuous stroke for mass production.

• Type: C Type
• Power Source: Hydraulic, Mechanical, Pneumatic
• Automatic Grade: Semi-Automatic
• Brand Name: Maruti
• Voltage: 440 V
• Power: 0.5-25 HP
• Features: Long operational life, Trouble-free functioning, Rigid structure
• Capacity: 3 ton to 250 ton
• Usage/Application: Industrial
• CNC or Not: CNC
• Frequency: 50 Hz
• Material: MS
• Phase: 3 Phase
• Fly Wheel Diameter: 330-1170 mm
• Crank Shaft Diameter: 38-165 mm

• Capacity: 05 TON TWO 400 TON
• Power Source: Hydraulic
• Capacity: 05 TON TWO 400 TON

We are the leading supplier of this products.

• Power Source: Hydraulic
• Type: Mechanical Eccentric
• Voltage: 380V
• Function: Metal Processing
• Weight: Up to 10000
• Power W: 7.5KW

Hydraulics press h farem press c farem press for pilor press aoll taip press manu fechars