Press Brakes Dealers in Dhebar Road, Rajkot

• Application: For Pressing Metal Sheets
• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 110V
• Automatic Grade: Automatic
• Rated Power: 1-3kw
• Driven Type: Hydraulic
• Warranty: 1year

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallesm between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard "V" Block & "V" Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Videkers, Rexroth, Dowty, Yiken, Polyhydron etc. Standard Feature Mitsubishi controller with monochrome touch screen. Swivel mounted Hardened & ground ball screw and shaft, liner motion bearing on guide rods AC servo motor for back gauge (x axis) drive High efficient optical liner glass tube scale for Y axis Movable work station with a pair of foot switch A pair of lifting links & sheet support One suitable five way die & punch of EN- 8 or EN 9 Centralized lubrication system with hand pump Ram lifting arrangement Bending chart Mitsubishi Controller & Drives The Controller with monochrome touch screen Manual, Auto, Program mode selection, Stroke Counter through Touch Screen It memorizes 120 (15 Programs and each Program 8 Bends.) Stroke Positions It stores stroke length, height of each bend It allows skipping a step in program if the bend will not required on the job The controller can be connected directly to computer by serial links The controller, Drive and Screen can be offered with customized High efficient Optical Linear Glass Tube Scale for perfect position of Y Axis. Repetitive accuracy with + or 0.05mm Program menus are protected by password Options Multi axis back gauge High speed MPI (Multi Port Interface) link for operation via PC. Anti deflection unit (Manual/Motorized/ Automatic) Hardened & ground tools and special tooling Sliding sheet support with swing away stoppers for front gauging Hydraulic tool clamping Photo electric finger safety guards Ginger guard for back gauge Automatic lubrication system Extra depth of throat Higher speed versions First Fill of hydraulic oil Timing belt drive

Our Heavy Duty Hand Press Brake Machines are made from M.S. Material and Mainly useful for any kind of Steel Furniture Industries. It is useful for Half Round and Right Angel Bending. Side Walls: Made from mild steel plate. Vertical and Horizontal supports are provided for more strength. Screws: Made from mild steel with square thick threads. Upper Beam: Made from Heavy Steel Plate. All surfaces are well surfaced to get accuracy. V-Block:Provided with 5 grooves for various sizes of job. Knife: Made from mild steel and sharpened up to 20o after sufficient machining.

Design of Synchro Press Brake is based on Y1 - Y2 cylinders synchronized for parallelism of Ram and Table through Electronic Control. Steel Frame is Rigidly Welded and monoblock construction is designed to absorb under load. . Cylinders are made out of High Quality Steel and precisely honed. Piston are Hard chrome Plate and Ground. Seals used are of Quality material and of imported make. Ram travels through rigid and accurate low friction Fiber Slide ways to achieve desired beam tilt. . Full electronic Synchronization. With servo valve technology of (Bosch-Rexroth or other imported make) assures continuous monitoring & correction of Y1 and Y2 parallelism through CNC control. . Stroke depth measurement through Electronic liner scales upto 5 Microns resolution. One side bending without any damage to guiding system.. CNC X-Axis (Back Gauge) travels on two Ball Screws and hard chromed Rod through Roller Cage guiding. CNC X-Axis (Back Gauge) driven by A. C. Servo Motor (Imported Make) and Encoder with close loop control.

• Tonnage: 20 to 500M. Tons
• Length: 1500mm to 5000mm
• Press Brakes with NC Stroke: Y-axis
• NC Bachgauge: X-axis

Choice of Programmable Press Brakes NC Stroke (Y-axis) with LED Control : Multi-bend jobs easy with help of multiple front stops. Recalll popular stroke settings for different jobs. Bend sequence programmable with different stroks. Interrupt production conveniently for one-off jobs. NC Stroke, NC Back Gauge (Y & X axis) with LCD Control : LCD control, menu, stores popular jobs-tools. Bends complex jobs quickly with minimal handling Accurate bends, Fewer inspections, rejections. Better productivity permits less machines-operators. Ecomomical against costlier multi-axes CNC brakes Faster set-ups, Part re-runs Exremely Fast. Rear Cylinder Drive and its Benefits : Two cylinders mounted on the rear drive the ram through levers. Torsion tube connects the levers to ensure parallel motion of ram. Levers multiply force, Simple cylinders, lower 160 bar working pressure. Smaller height-depth, hydraulic drive allows installing in tight places, upper floors. Choice of Feature packed Press Brakes Basic model with SIngle Stroke Setting : Stroke referenced from bed, Repeatability ±0.03mm. Ram travel parallelism without use of servo-hydraulics. Convenient bend angle setting, 3-speed stroke cycle. Adjustable tonnage, Stroke length, speed change point. Front supports with stops-scale, set of back-stops. Standard Features : Accessories for Basic Model Ram travel repeatable within ±0.03mmfor consistent bends for interchangeable output. Ram travel is referenced from bed to aboid side frame deflections affecting stroke accuracy. Rugged structure from ultra tested IS 2062 grade B plates, rigidity conforming to international standards. Hydraulics, electrical fo internationally reputed brands for consistent performance and reliable opration. Front operated manual back gauge Front sheet supports with scale most hydraulic parts for 310 bar but working design with replaceable liners. Pivots with permanently lubricated bearings or hardened parts lubricated by central hand pump cylinders of ultra-tested seamless honed tubes, hard chrome-plated pistron, dual seals (Teflon ring plus set of chevron packing's) for extra reliabilty. 3-speed bending cycles for faster output yet slow smooth bending with minimal shck loads. Movable control station with majority controls, emergency stop, up-down foot-switch controls. Inch cycle mode for set-up and one-off jobs. Single cycle modes for repeat cycle, production runs. Main cylinders seals can be easily replaced without requiring crane or dismantling the ram. Hydraulic power gives silent working, better safety against overload, instant stoppage-reversal of ram One set of unhanded standard punch, multi-vee die Block Lifting chains system and rotation of die block when using multi-vee die block.

We offer hydraulic press brake. Weldor hydraulic press brakes are designed and developed through years of experience in sheet metal working machineries. Weldor hydraulic press brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of press brake and are synchronised for parallelism between ram and table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for weld joints. The electric control panel is fixed on side wall at convenient place for easy reach of operator. It includes push button pendant and foot switch. Standard v' block & v' punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed make like vickers, rexroth, dowty, yuken, polyhydron etc.

• Automatic Grade: Semi-Automatic
• Power: 5.5 Kw
• Weight: 2750 Kg
• Brand Name: Shailesh
• Capacity: 40 Ton
• Model: 40T/2200
• Worktable Length: 2200 mm
• Pulse Distance: 1850 mm
• Throat Depth: 230 mm
• Stroke: 100 mm
• Max Open: 320 mm
• Dimension: 2200x1200x1910 mm (LxWxH)

Mechanical Press Brake, Sheet Metal Machine

• Brand Name: Shubham
• Control Type: CNC
• Automatic Grade: Automatic
• Layout: Vertical

Hand Press Brakes, Hydraulic Shearing Machine, Metal Machine

400 440 volts, 3 phasa, 50 cycles As day to day improvement are contemplated for better performance of machine, we reserve the rights to alter the specifications without prior notice. all dimensions are in mm.

• Brand Name: KAWA
• Rated Power: Hydraulic
• Machine Type: Press Brake
• Certification: ISO 9001 2000
• Automatic Grade: Automatic
• Place of Origin: Gujarat, India
• Material / Metal Processed: Aluminum

Press Brake, Roll Plate Bending Machine, CRANK MECHANICAL SHEARING MACHINE

Hydraulic Press Brake, C Hydraulic Press, Horizontal Hydraulic Press

Hydraulic Press Brakes, Bending Roll Machines, Hydraulic Machines

Hydraulic Press Brake, Hydraulic Press Brakes, Hydraulic Shearing Machinery

Hydraulic Press Brakes, Material Handling Equipment, Power Press

Treadle Shearing Machine, Power Shearing Machine

Hydraulic Press Brake, Hydraulic Plate Bending Machine, Power Press

Press Brake, EOT Crane, Forging, Gear, Pinion, Sugar Plant, Coupling

Mechanical Press Brakes, Hydraulic Press Brakes, Power Presses