Pressure Pump Dealers in Dhebar Road, Rajkot

ZJ series high pressure piston grease pump are able to accept up to two outlets working separately, and each outlet needs a piston mechanism. There are two models of piston mechanism: ZJ-3602-05 (fixed output) and ZJ-3602-05V (variable output). The system is capable of handling lubricants up to NLGI 2# grease. The system generally runs at high pressure, typically rated at 30Mpa. The ZJ series pump can be combined with U-shaped progressive distributors, SD type block-type progressive distributors to form progressive lubrication system. Features of ZJ series high pressure piston grease pump: a. Electrically operated at DC12/24V, can be connected with the power of the main equipment, (e.g. engineering machinery, mobile machinery, etc.) b. Special alloy steel piston mechanism, with high accuracy, stable pressure, low noise and long usage life. c. With paddle, can release the air of the grease through the working of paddle. d. Can offer pressure signal with pressure switch installed on the lubrication system; can offer liquid level signal with liquid level switch, so it can realize long-distance monitor. e. In the aspect of controller, it can use the controller of the pump to monitor the time of operating and intermittent; it can also choose the PLC from main equipment to control the time of operating and intermittent. f. Two ways of grease pump control: one way is Time-Programme control (ZJ-3602-08-02A) and the other is Time-Travel control (ZJ-3602-08-02B) ( Further controller details in Page 14) ZJ series high pressure piston pump are available in two types of reservoirs according to the material: PC type and metal type reservoir. For the capacity of PC reservoir, it is available with 2 liters,3 liters,4 liters,8 liters respectively; For the capacity of metal reservoir, it is available with 2 liters,4 liters.   2. Working principle    DC motor (10) continuously drives the eccentric mechanism (eccentric wheel  and shaft sleeve ). The piston of the eccentric mechanism (7) is pushed forward and backward to produce reciprocating movement to pump and deliver grease. And the integrated check valve (8) is to prevent any back flow from the main grease line. The paddle/ scraper (2) can press the grease from reservoir (1) along the grease baffler (4) into the suction section on the base of pump (3). The air bubbles are released out via the grease buffer, and ejected from the exhaust vent. The pressure of the safety valve (9) is preset at 30Mpa. 

Our Hydraulic Pressure Test Pump is compact in design and light in weight owing to which it is highly in demand. The Hydraulic Pressure Test Pump can be unbolted to carry easily. No foundation is required even on high pressure pumps. The parts of our Hydraulic Pressure Test Pump are made from stainless steel and ensure sturdy construction as well as long term functionality.   Design Features  The Test pump is very compact, light in weight and can be unbolted to carrry easily. Stand is designed in such a way to keep on plane surface and operate without any foundation. Even in high pressure pumps no foundation is required. All the working parts aer made of SS to stand the specified pressure. All joints are threaded so that any part can be replaced on the site easily.

steam pump, Pump

• Color: GREY
• Brand Name: PG-GOLD
• Country of Origin: Made in India
• Application: SUBMERSIBLE

HYDRO PNEUMATIC PRESSURE BOOSTER SYSTEM consists of an automatic pressure controlled pump and pressure tank, which contain an air filled polyether-urethane (PEU) bladder. The water gets pumped in this tank that compresses it and pressurizes the bladder, which in turn maintains the desired pressure within the whole water piping and fixtures.   The method of reducing stating current and inverter loading is to vary motor speed. Centrifugal pumps follow a set of physical laws known as laws of affinity. One of them states that states that the power required to run a pump varies as a cube of any change in speed. If one reduces the normal running speed of 1 HP Pump by 50% only 1/8 HP is required to run it at the lower speed. Even a reductions result is substantial power reduction. An AC electric motor’s speed is varied by changing the frequency of the power supply. AC power in the US is supplied at 60 Hz. With a device known as a variable frequency drive, the supply frequency can be varied 0 to 60 Hz. By starting the motor at lower frequency and ramping up to full speed over a period of a second or so, starting current is greatly reduced. Another advantage of this controlled pump is that their speeds can be controlled automatically to provide constant pressure during varying flow conditions. A simple pressure transducer, connected to  the VFD, monitor pump discharge pressure & varies motor speed, thus maintaining pressure as demand varies in addition to providing nearly constant reducing the pump when demand decrease.       Industrial Water Distribution Systems Hospitals, Hotels Restaurants and individual Bungalows Multistoried Buildings Commercial complexes High rise Building & Residential societies irrigation/Foundation systems Boiler feed/DG Set/Feed/Cooling Tower/HVAC systems and all machinery where water pressure is required Fire Fighting Systems Big Townships Municipal Water Supply Systems for large scale application Car Washing/Automobile/Machinery for cleaning Applications

Higson Power marking vide range of domestic Self Priming pumps to cater individuals need. Higson's domestic self priming pumps are quite in demand in domestic markets...

We are offering Centrifugal Circulating Water Pump. Specifications Engine : 5 to 10 H.P.Size : 1" X 1"

triplex pumps, Car Washer Pumps, Dosing Pumps, Hydraulic Test Pump

borewell, Openwell, Submersible pumps

RO Water Booster Pump, RO SMPS Adaptor

steam pumps