Process Controllers Dealers in Rajkot

FEATURE     Input : T/C J,K,R,S/Pt-100 (RTD) Sensor break indication, 31/2 digit, 0.5" DisplayControl action : Time Proportional/ON-OFF TypeOptional O/P : 4-20 mA/0-5, 10V DCAccuracy : +0.5% of F.S.Setting by Thumb wheel SwitchDial Knob-Deviation Indication.

• Country of Origin: India
• Type: Pump Controllers
• Shape: Square

introduction:single phase digital pump controller by galaxy enterprise is a product which is much needed in urban houses and to control the pump and save it from getting damaged due to access of current and short circuit issues. Due to its microcontroller based fault detection and prevention technology, its far better to control and protect your pump from any fault damage and hence increasing your pump life.not only that, it is designed in a way that, it will save your water and electricity by controllering the power efficiently in case of voltage or current fluctuations.use: house, apartments, hospitals, commercial buildings, industry, etc.advantages: sturdy and durable need not maintain long life (more than 8 million operation) rust proof fit and forget solution accurate fault detection and solution saves power and money.features: 1) over current settings: switch off the pump when there is current exceed the set value in the controller settings 2) under current settings: switch off the pump when there is under current than set value in the controller settings 3) short circuit protection: in case of access electricity or phase faults, controller protects motor from getting damaged by tripping function 4) digital display: the display with accurate detection of motor current and voltage values at any given time 5) low maintenance. 6) no more overflow or dry run thus saving water electricity & manpower. 7) increase the pump set life. 8) switch on & off automatically. 9) no current/voltage is passed through water, therefore no electrolysis salt deposition.

・Integrates a quick exhaust valve and an exhaust throttle valve.・Supports the high speed operation of cylinders.

• Brand Name: Satronic
• Country of Origin: Made in India
• Model Number/Name: DLG 976
• Usage/Application: Sequence Controllers
• Temperature: -20* C +60* C
• Frequency: 50/60 Hz

• Brand Name: ThinkX
• Input Voltage: 440 VAC
• Phase: Three Phase
• Capacity: 1 hp to 7.5 hp
• Current Capacity: 20 Ampere Max
• Suitable For: Monoblock,Openwell Pump
• Protections: Single Phasing, Phase reversal, Dry Run, Over Load, MCB, Digital Readouts for Current and Voltage

• Brand Name: MULTISPAN
• Power: 100 to 240 VAC
• Type: Digital
• Model Number: TC-29
• Controller Type: PID,On/Off Control

• Size: 48 x 48 mm
• Temperature Range: 0 - 50 Deg C
• Display Type: 4 Digit/7 Segment
• Voltage: 100-240 V
• Features: Fewer parameters for simple setup, Faster sampling at 250 ms, Improved visibility with character height of approx. 16 mm.
• Brand: Omron
• Model No.: E5CB
• Control Type: PID/On-Off
• Input Type: Current (mA), Thermocouple, RTD, Voltage (mV)
• Control output Type: Relay/SSR, Analog (mA/mV)
• Storage Temperature: -25 to 65 Degree C
• Ambient Operating Humidity: 25% to 85%
• Operating voltage range: 85% to 110% of rated supply voltage
• Power consumption: Approx. 3.5 VA
•  :  

  Fuzzy Logic PID Controllers with Universal Input (Thermocouple / RTD / 4 to 20 mA) Control Output : Servomotor, On-Off Relay, 4 to 20 mA Alarm Output : upto two alarm, 230 VAC, 3 Amp Relay Additional features : Remote set point, Retransmission output, Serial Communication RS 485/RS 232 Programmable profile controller with 16 segment Ramp �Sock program Size : 48 X 48 mm2, 48 X 96 mm2, 96 X 48 mm2, 96 X 96 mm2  Application   For Precise & fine controlling of temperature, pressure, level, flow and speed of motor through AC Drive

The Automatic Batch Controller provides control capability and process fine-tuning in a familiar package. The programming interface uses a four-button keypad and an intuitive procedure for adjusting a batching system to the best performance possible. The standard 1/4 DIN package houses an analog display panel, which features a batch status indicator with count-up or count-down dials. The backlit LCD displays flow rate and volume information and batch status, as well as calibration and set-up instructions. The front of the unit is NEMA 4X/IP65 and is hard-coated, high-impact and UV resistant polycarbonate. The Automatic Batch Controller operates on 12 to 24 Volt power, either AC or DC. Removable terminal connections make the wiring easy. Connect any flow sensor with a frequency output, then add connections to two relays for two-stage shut-down or overrun alarm functions, connect a remote start-stop switch and use the end-of-batch pulse to trigger the next step in the process. A 4 to 20mA output is also available. Advanced features Of Automatic Batch Controller User-set security codeAutomatic calibration optionOverrun compensation

Digital Temperature Controller, programmable digital timer, Contactor

motion controller, Electrical Upsetting Machine

Batch Controller, automation load cell, bellow type load cell

pneumatic controllers, expansion boards, power distribution blocks

Digital Temperature Controller, Calibration Furnaces

Process Control Systems, process control instrument

Digital Temperature Controllers, pa horn tweeters, pa metal sound column

Air Controller, LPG Knob, Air Intake Connector, air nipple

diesel engine connecting rod, RTCC Control Panel, Diesel Engine Piston