Pumping Systems Dealers in Shapar, Rajkot

High grade & close grained cast iron has a very smooth surface finish and coated with corrosion resistance primer. Class ‘A’ and class ‘B’ insulation used above 3 H.P. and upto 3 H.P. models respectively. All components are dynamically balanced and machined by CNC machines. Total 40 models available able to run in wide voltage variation. SKF Ball bearing are used for long lasting life and better efficiency Each pumpset is tested as per IS standard before dispatch All pump set are available with thermal overload protector (TOP) Improved design to ensure better efficiency and low noise

We are a prime Manufacturer, Exporter and Supplier of V4 Submersible Pump Set. V4 Submersible Pump Set, offered by us, has lower and upper housing made up of cast iron and stator shell manufactured from heavy duty stainless steel. V4 Submersible Pump Set operates in both single and three phases and has a minimum and maximum discharge of 400 and 15 LPM respectively.

• Use: Agriculture
• Quality: High Quality
• Quantity: As per Required
• Place: India

Features & Benefits : Available in both type surface and submersible. Applicable for all type of bore, ponds etc. Maintenance free/Low DC/AC branded pumps fit and forget. No any running cost, freedom from electricity bills. Complete mounting structure(powder coated) with tracking system. It can supply water at flow rate of 1000L/min or more. It can work for more than 100 meter depth. It can be installed in any remote areas Properly designed AC drives to run AC pump with solar modules. Subsidy from MNRE/NABARD and other state (India) nodal agency is available   Application : Agriculture Irrigation purpose  Drinking Water Pond aeration & livestock watering Drip & Sprinkler Industry water supply

We are offering open well vertical submersible pump set, product range: 5 hp to 15 hp. 3.0 h.p. To 15 h.p. Three phase. 0.5 h.p. To 2.0 h.p. Single phase. able to run in low voltage. available in horizontal & vertical with multistage with s.s. Body. higher head with higher discharge for agricultural use. maximum head up to 270feet. maximum discharge up to 1400 litmin. performance: maximum head up to 450 feet. maximum discharge up to 1800 lpm. able to run in 200 to 415 voltage range in 3ø. overall efficiency up to 60%. application of domestic openwell horizontal pumps     hotels high rise buildings fountains industries. .

• Type: Coupling
• Material: Stainless Steel
• Technics: Casting
• Color: STEEL
• Port: Mundra Port / Ahmedabad ICD
• Model Number: 1inch
• Supply Ability: 10000 Piece/Pieces per Day
• Place of Origin: Gujarat, India

• Structure: Multistage Pump
• Power: Electric
• Brand Name: FLOTECh submersible pump set
• Theory: Mixed Flow Pump
• Supply Ability: 200000 Unit/Units per Year
• Standard or Nonstandard: Standard
• Packaging Details: Standard Corrugated Boxes / Wooden Boxes / Standard Export Packing
• Model Number: submersible pump set
• Lead Time: as earliest
• Usage: Water

• Features: Long life, Economical, prices Perfect finish

• Type: VERTICAL OPENWELL
• Number Of Stages: Multi Stage Pump
• Motor Horsepower: 3.0 HP TO 15 HP
• Brand: Winsor
• Usage/Application: OPENWELL AND CANAL AND RIVER AND LAKE
• Motor Phase: Three Phase
• Head: 40 MTR TO 146 MTR
• Voltage: 440 V
• Frequency: 50 Hz
• Max Discharge: 200 LPM TO 700 LPM

our company start by 1994,.

• Number Of Stages: Multi Stage Pump
• Motor Horsepower: 5 - 20 HP
• Motor Phase: Single Phase, Three Phase
• Brand: Centuryply
• Power Source: Pump Only
• Maximum Discharge Flow: 100 - 500 LPM, 501-1000 LPM
• Warranty: 6 months, 12 months
• Type: Borewell, Water Filled, Horizontal, Electric, Portable, Solar
• Material of Construction: Metal
• Frequency (Hertz): 50 Hz
• Voltage (Volt): 220 V - 440 V
• Applications: Agriculture
• Condition: New

• Application: Industrial
• Color: Silver
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Pressure: Medium Pressure
• Maximum Head: Up to 270 Feet.
• Maximum Discharge: Up to 1400 Lit/min.

Features High Efficiency. Optimum Performance. Low electricity consumption. Technical Specification 3 HP to 10 HP in 3. 3.0 H.P. to 15 H.P. Three Phase. 0.5 H.P. to 2.0 H.P. Single Phase Able to run in Low Voltage. Available in horizontal & Vertical with multistage with S.S. body. Higher Head with Higher Discharge for Agricultural use.

Direct coupled and belt driven centrifugal pumps are single stage, radial flow end, suction type with horizontal shaft and vertically split casings. Pumps are fitted with pulleys or with flexible couplings, to be driven by electric motors or diesel engines. Direct coupled pumps are supplied with a common base plate   Salient Features of the Pump: Casing :The volute type casing is scientifically designed to produce a smooth flow, with gradual changes in velocity, ensuring the efficiency of the pump. The casing is made of high grade, close-grained cast iron. Impeller :The impeller is made of high grade, close-grained cast iron, accurately machined on the outside. The interior passages are hand-finished. Supporting Frame : Robust and sturdy, it is designed to accommodate shaft and ball-bearings. A gunmetal sleeve provides rigid support for the pump.Shaft : This is made of special shaft steel. Accurately machined, it is designed to transmit maximum power without vibration. Bearing :Heavy-duty ball-bearings and sleeve-bearings are used to withstand radial/thrust load.Rotation : The standard rotation of the pump is anti-clockwise when viewed from the driving end. This makes it suitable for direct coupling to the engine.

0.5 & 1.0 HP single phase or three phase fully stainless steel horizontal openwell submersible pump set 

• head: 430 meter
• flow rate: upto 1400 LPM

Kiwi pumps is India’s largest manufacturer & exporter of 6” submersible pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. Kiwi Pumps, Rajkot TUV SUD certified ISO 9001:2000 Company that’s what you need in your bore. Kiwi has a wide range of 6” borehole submersible pumps that suit various kinds of user requirements.Kiwi's 6" Borehole submersible pumps suitable for 6" or larger boreholes. Superior hydraulic design of impeller and diffuser make these pumps are most efficient. Utilization of top class material allow pumps to be reliable, long lasting and increases ites wear resistance towards sand. State of the art manufacturing process ensures optimum and consistent quality of these pump. Manufactured from corrosion & abrasion resistant materials. Close coupled to a submersible electric motor. Designed for flow rate upto 1400 LPM and head upto 430 meter.

• Brand Name: CMC
• Type: Water Filled
• Motor Horsepower: 0.5 HP - 30 HP
• Usage/Application: AGRICULTURE & DOMESTIC
• Power Source: AC Powered
• Warranty: 12 months

COSNTRUCTIONAL FEATURES :(1) The Motor Withstand wide Volute Fluctuation between 180 to 240 Volts (2) CRNO M-45 Grade Stamping used (3) Heavy Duty Seemliness and Stainless Steel Pipe Provide. (4) Stainless Steel Shaft use to Prevent Corrosion. (5) Rotor With S.S. Shaft is Dynamically Balanced.

  For our esteemed clients based across the country, we have come up with a precision engineered range of Brass Thrust Bearing. These are fabricated using quality brass and are stringently tested to ensure industry norms. Clients can also avail these in customized specifications as per their specific requirements.

• Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP):  
•  : Speed : 2880 RPM
•  :  
• Version : Single Phase 160V to 230V, 50Hz, AC Supply:  
•  : Heed Range : 14 Mtr. to 96 Mtr.
•  :  
• Discharge Range : 70 LPM to 15 LPM:  
•  : Outlet Size in Inch : 1.25”
•  :  
• Degree of Protection : IP 58:  
•  : Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
•  :  
• flow along the motor : 0.15 m/sec.:  
•  : Type of duty : S1 (continues)
•  :  
• Method of starting : 1ph-Capacitor:  
•  : Max. starts per hour : 20 times
•  :  

DPI PUMPS Horizontal Openwell Submersible Pumps are manufactured as per IS: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency. Since these pumps are designed for underwater applications, there is no need of priming and foot valve. TECHNICAL SPECIFICATION : 1. Power range : 3.0 HP - 7.5 HP 2. Power supply : 415 volts (+6% / -15%), 3-ph, AC, 50Hz 3.Total head : Up to 40.0 meters 4. Flow rate : 1350 lpm 5. Motor details : Wet type, CAT - B, Duty S1 FEATURES: 1. Very low maintenance due to high quality carbon vs steel combination of thrust bearing. 2. Stamping are used of high quality grade and winding wire with high quality insulation. 3. Higher efficiency which gives result into high discharge at low power consumption. 4. Suitable in voltage variation with greater performance even in low voltage. 5. High pumping efficiency for reduce running cost. APPLICATION : Water pumping from suitable bore well for many requirements such as, 1. Irrigation - open, drip or sprinkling system in gardening. 2. Fire fighting application. 3. Drinking water needs cities and villages. 4. used for water supply in bungalow, high rise buildings etc.

Power range : 5 H.P. To 50 H.P. Three PhaseSpeed : 2820 RPMVersion : A. C. Supply, 350 - 415 Volt 50 HZ. Star Delta Or 60 Hz.Type of Duty : S1Flow Rate upto : 115 To 2650 LPM ( Liter Per Minutes )Head Range upto : 36 Meter To 162 MeterNominal Outlet Size : 65MM, 80MM, 100MMMaximum Liquid-Temperature : 33' C