Rockon Overseas GIDC, Rajkot, Gujarat

We are manufacturer , exporter and supplier of superior quality of flanges, steel flanges, stainless steel flanges, alloy steel flanges, carbon steel flanges etc. that are available in various shapes and pressure rating to meet the specific requirement of various industries. Made up of corrosion free material, these steel flanges, stainless steel flanges, alloy steel flanges, raised face flanges are long lasting and shock proof. Designed with utmost precision, our stainless steel flanges are used for piping pressure in industries like food, chemical and pharmaceuticals. These pipes are available in various standardized dimension and are typically flat faced, ring joint and raised face. Specification Size: 1/2" - 72"(DN15 mm-2000mm) Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Materials: Carbon steel, Stainless steel and Alloy steel etc. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/ F91/ etc.. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Types: Weldneck , Slipon, Blind, Socket Weld , Lap Joint, Spectacles, Ring Joint, Orifcae, Long Weldneck, Deck Flange, etc. Wall Thickness: 150 #, 300#, 400#, 600#, 900#, 1500# & 2500#. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order..     Also as per National & International Standard & Specification     More information is available upon receipt of your enquiry.  

Weld-Neck flanges or welding-neck flanges can be differentiated from all other types of flange by their long tapered hub. In addition, there is also a gentle transition of thickness in the region of the butt weld that joins them to pipe or a fitting. Weld-Neck flanges or welding-neck flanges are best suited for severe service conditions, whether loading conditions are substantially constant or fluctuate between wide limits. We are manufacturing a comprehensive range of Weld Neck Flanges which are available in various sizes and dimensions to match the pipes. These flanges are mainly used to connect pipes and are considered as an important unit to hold up mechanical parts. Our Weld Neck Flanges are developed from superior quality carbon steel, stainless steel and alloy steel, and are built in compliance with client's requirements. Specification Size: 1/2" - 72"(DN15 mm-2000mm) Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Materials: Carbon steel, Stainless steel and Alloy steel etc. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/ F91/ etc.. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry.

Slip-On flanges or SO flanges are commonly lower in price than weld-neck flanges, and to this effect are a popular choice for our customers. However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation. however, weld-neck flanges have a higher life expentancy than slip-on flanges under duress The slip-on flange is positioned so the inserted end of the pipe or fitting is set short of the flange face by the thickness of the pipe wall plus 1/8 of an inch, which thus allows for a fillet weld inside the SO flange equal without doing any damage to the flange face. The back or outside of the slip-on flange or SO flange is also welded with a fillet weld.   Specification Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry.  

A lap joint flange is very similar to a slip-on flange, with the main difference being that it has a curved radius at the bore and face to house a lap joint stub-end. Lap joint flanges and stub-end assemblies are typically used in situations where frequent dismantling is required for for inspection Our Joint Flanges, which is manufactured from top grade materials, thus meeting the various requirements of our clients. These are available in various sizes, grades and dimensions. As per the requirement of our large clients we can also provide customized solutions within the committed time frame. Specification Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry.

Size : 1/2" - 72"(DN15 mm-2000mm)

Threaded flanges look very similar to Slip-On flanges but the main difference is that the threaded flange has been was bored out to match a specific pipe inside diameter. The backside of this center opening is then threaded with the relevant-sized tapered pipe thread. Threaded Flanges can be used in very high pressure services and their major advantage is that they can be assembled without welding. Our range of threaded pipes can be availed in different dimensional specifications based upon client's requirements. Specification Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Process: free forging, plate cutting More information is available upon receipt of your enquiry.

The fabrication of this type of flange is similar to that of a slip-on flange, but the main difference is the socket weld flange is bored out match a specific pipe inside-diameter. The back side of this center opening is then counter bored to form the appropriate size socket to take the pipe outside diameter. The diameter of the smaller bore is the same as the inner diameter of the matching pipe. A restriction is built into the bottom of the bore, which sets as a shoulder for the pipe to rest on. This eliminates any restriction in flow when using a socket-weld flange. Socket weld flanges are primarily used to make flanged joints where required in small sizes in socket welded pipe specs. Specification Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry.

Size : 1/2" - 72"(DN15 mm-2000mm)

A Blind flange is round plate which has all of the relevant boltholes but no center hole, and because of this feature this flange is used to close off the ends of a piping systems and pressure vessel openings. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened. Blind Flanges are commonly used in petrochemical, pipe engineering, public services & water works. We offer a range of blind flanges that are precision-engineered using best quality raw material. Our range is in compliance with set industrial standards and known for accurate size and durability. Further, our blind flanges are available in different specifications to suit the varied requirements of our clients.   Size: 1/2" - 72"(DN15 mm-2000mm) Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Materials: Carbon steel, Stainless steel and Alloy steel etc. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/ F91/ etc.. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry.

Size : 1/2" - 72"(DN15 mm-2000mm)

We maintains a large inventory of flanges in many materials, sizes and configurations. We are the manufacturer and exporter of Long Weld Neck Flanges made of superior quality metals like industrial steel flanges, alloy steel flanges, stainless steel flanges etc. One can easily avail these flanges in different grades and qualities. It work effectively in diverse applications and last longer compare to ordinary flanges.   Specification Size: 1/2" - 72"(DN15 mm-2000mm) Standards: ANSI, BS, DIN, UNI, JIS, GB, Non-standard etc. or as customers' drawings for special use. Materials: Carbon steel, Stainless steel and Alloy steel etc. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc Carbon Steel: ASTM A105/ A105N/A694F42/46/52/56/60/65/ 70 / A350 LF3/ A350, LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/ F91/ etc.. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500, DIN PN 6, PN 10, PN16, PN25, PN40 and PN64, JIS 5K, 10K, 16K and 20K. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry

Size : 1/2" - 72"(DN15 mm-2000mm)

We offer high quality Forged Tee Fittings manufactured using superior raw material and sophisticated machines. The raw material is procured from far famed vendors, who process only best quality products for the clients. It has the below mentioned specifications: Specification Grades: 304/L 304H - 316/L - 309/S - 310/ S - 317/L - 321/H - 330 - 347/ H - 410 - 2205 - 254SMO - AL6XN - Alloy 20 - Other Nickel Alloys Features: Temperature resistant, High tensile strength, Durable, Optimum quality  

Size : ½” to 4”

We are offering a range of 90 Degree Forge Elbow Pipe Fittings that is specially manufactured as 90° Forged Elbows. Widely appreciated for its features like perfect finish, easy installation and durability, it finds application in various industries. Also, the range is famous for its perfect angular bent to fix two pipes in the similar manner. It comes with the specifications as follows:   Grades: 304/L 304H - 316/L - 309/S - 310/ S - 317/L - 321/H - 330 - 347/ H - 410 - 2205 - 254SMO - AL6XN - Alloy 20 - Other Nickel Alloys Features: Temperature resistant, High tensile strength, Durable, Optimum quality Reducing or single side threading available as per requirement  

We offer an extensive range of Full Coupling, which has high quality, perfect work craft and strict tolerance. Also, we offer custom-designed products in order to fulfill the specifications of the customers. Our supreme quality:   Grades: 304/L 304H - 316/L - 309/S - 310/ S - 317/L - 321/H - 330 - 347/ H - 410 - 2205 - 254SMO - AL6XN - Alloy 20 - Other Nickel Alloys Features: Temperature resistant, High tensile strength, Durable, Optimum quality

We put forward an exclusive range of Forged End Cap, which is widely acknowledged due to its accurate dimensions and excellent strength. Manufactured using high-grade material, the range finds application in various areas. Following mentioned are some of the specifications of the products:   Grades: 304/L 304H - 316/L - 309/S - 310/ S - 317/L - 321/H - 330 - 347/ H - 410 - 2205 - 254SMO - AL6XN - Alloy 20 - Other Nickel Alloys Features: Temperature resistant, High tensile strength, Durable, Optimum quality

We offer high quality Forged Cross Tee Fittings manufactured using superior raw material and sophisticated machines. The raw material is procured from far famed vendors, who process only best quality products for the clients. It has the below mentioned specifications:

Size : ½” to 4”

We are a trusted manufacturer of a wide range of Thredolet Fittings that are manufactured using high grade material. These are in conformation with the industry standards and are offered in various specifications to our clients. Our range finds applications in various industries and is known for its durability, corrosion resistance & long service life.

A lap joints stub ends and it associated slip on flange in a piping system allows quick disconnection of the particular section involved. Stub ends are installed in pairs and mated together with two lap joint flanges. The surface of the stub end has a phonographic serrated gasket surface which prevents leakage at the joint. Using stub ends allows sections of the line to be opened for cleaning, inspection or quick replacement etc, without the need to re-weld. There lap joints stub ends are two basic types of stub end, A.S.A.long barrel, and M.S.S. short barrel. Under certain design criteria such as temperature or pressure etc, it is not acceptable to have the joint between stub end and pipe in close proximity with the flange joint; in these applications A.S.A. types are used.

We are manufacturer , exporter and supplier of superior quality of borwell pipes and fittings that are available in various shapes and pressure rating to meet the specific requirement of various segments. Designed with utmost precision, our fittings are used for various purpose in the world of borwell. These pipes and fittings are available in various standardized dimension and as per special requisition of the clients.   Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry.

Material : Carbon steel

It is manufactured from premium grade metal procured from reliable vendors of the market. The entire range of accessory is well reckoned in the global market for its sturdy construction, high strength, corrosion resistance and longer service. ROCKON offer a large list of furniture fitting products to its client. namely , Zinc metal products , Stainless Steel Products and Enameled products with Zinc metal and Stainless Steel.These are available in various sizes, grades and dimensions. As per the requirement of our clients we can also provide customized solutions within the committed time frame. Excellent quality with cost advantages. Sturdy construction Corrosion resistance Accurate dimensions Longtime functioning Compact design High tensile strength Precise design Fetures Delivery: usually within 30days after receiving the formal order.. More information is available upon receipt of your enquiry.

Materials : Zinc metal,Stainless Steel,Alluminium,Zinc metal with enameled etc.

This hall is widely demanded across various households for several hanging and fitting related purposes as per the need of the clients. The offered hall is manufactured from supreme grade raw materials in compliance with international standards. Our offered hall is tested by a team of quality controllers on different parameters in order to ensure their flawlessness at clients end.