Rotary Mixers Dealers

It can hold 16 nos of 13*75mm 13*100mm 9*120 mm blood collection tubes. we provide it in single packs.

Wavex rotating mixer give gentle but effective mixing of biological samples to be held in 1.5 ml to 50 ml tubes used in a variety of applications including immune precipitations, prevention of blood coagulation and latex diagnostics. Wavex rotating mixer has a rotisserie type design. LCD displays and digital speed control allows procedures to be accurate.

• Driven Type: Hydraulic
• Warranty: 1 Year
• Brand Name: SGEI
• Color: SS
• Frequency: 50-60 hz
• Capacity: 500L To 50,000
• Model Name/Number: 800L
• Voltage V: 220-240 V

• Voltage: 220 Vac
• Power: 6w
• Weight: 2.0 Kgs
• Brand Name: ILAB
• Model no: DR-30
• Speed: 30 RPM
• Slope Angle: 45°
• Dimension( WXDXH) MM: 165X150X145

Product Feature AC Synchronous motor for noiseless operation. Suitable for a variety of centrifugal tube 1.5-50ml. Circular rotating action gives gentle and effective mixing. Fix speed of 30 RPM with an accuracy of +/-2 RPM. Continuous/infinite mode of operation. Fix plate angle of 45 Degree. Easy to operate, long running, stable and low noise. Maximum operational weight capacity of 1.5 kgs. Easy to remove and install disk plates for replacement and cleaning.

Contra Rotary mixer – Heavy duty is a main manufacturing vessel for paste making It efficiently combines liquid and solid particles to paste/gel under Vacuum Set of blades rotating opposite to each other gives turbulence for effective mixing Materials may be either charged open cover or by vacuum feed. Large quantities of material from phase vessel is sucked efficiently by vacuum Supported on 3 legs : 2 ” Size located at 120 deg equal angles Main Agitator motor : driven by suitable motor with both sets of blades Motor: Crompton/Kirloskar make – FLP and Gearbox – Radicon/Elecon/Shanthi Shaft is supported through a heavy duty bearing housing with mechanical seals Speed of the agitator: 11 to 40 External and 20 to 60 Internal provided with VFDs Bottom discharge valve is pneumatically operated and CIP optional extra

• Finishing: Painted
• Chamber Capacity: 300 KGS.
• Working Capacity: 250 KGS.

• Weight: 1.2 Kg.
• Brand Name: Laboid
• Mains Input: 230V/50Hz |110V/60Hz A.C. Supply
• Body: ABS + METAL Body
• Motion: Tilting - fix degree at 38
• Speed: 15 RPM
• Size of Device: 188 (L) x 221 (W) x 260 (H)mm
• Operation: Quiet - No noise
• Standard configuration: 4ml vacutainer (EDTA) Tubes - 12 nosAnd ESR
• TUBE (8mm): 4 nos. (Total-16 nos)
• Special configuration: 16 Tube of either type or mix as required.

One of our most popular products, the Rotary Frit Mixer is made out of the best quality raw materials and is guaranteed to have high durability during its operational period. Our product is also proven to be rust free for a long time. One of the most attractive features of our product is the ease with which it can be installed and maintained. The product also boasts of a superior finishing and strong construction which adds to its durability and reliability.

Contra Rotary Mixer is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity. Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections

• Material: 304 Stainless Steel
• Model: IPM-600
• Volume: 600 L
• Motor: 1.5 KW
• Rotate speed: 0-6 RPM
• Weight (kg): 450

  Clockwise rotate for mix the material, and anti clockwise rotate for load out material. Special Nozzle will provide with machine for spray fructose inside mixer. Special design as per the above photo.

  This rotating mixer has a well balanced body for safe mixing of test tubes inserted in the rotating wheel. The test tubes are held by elastic clamps to secure them in place during the mixing process. The rotating wheel provides 60 holes with 3 different diameters to hold test tubes of the following sizes: 20 holes of diameter 10mm, 20 holes of diameter 12.5mm, 20 holes of diameter 15.5mm. The rotating wheel is screwed into place counter clockwise and can be easily unscrewed for any laboratory purpose. The stand is coated with an acid resistant finish. Both the stand and rotating wheel are built for long lasting use and resistant against many chemical and solution spills.     The principal of this mixer is that during the rotating of the test tubes the axis of rotation changes, also causing a gentle waving motion and mixing of the test sample from the top of the test tube to the bottom and then back. The rotation of the wheel is set at 6 rpm ensuring a uniform and gentle mixing of the test samples.     RT20 Rotating/Swaying Mixer : This is a smaller version of the model RT60 and is suitable for up to 20 test tubes with a range of diameter from 10 up to 15.5mm.

It is mainly used for tissue culture, sample extraction, sedimentation rate determination. E.g. Blood sample mixing, wet-chemical analysis of radio-immunity, glucose, protein, dna, cellula, immune, chemistry, flora and fauna analysis, clinical experiments, etc. 1. Timing function. Timing range: 0~9999 min. 2. The plate’s gradient can be adjusted from 0 to 90°. 3.three optional plates, suit for the tubes: 1.5ml, 15ml and 50ml. 4. Humanized designed operation keyboard. Led display time and speed. 5. Dc brushless motor with accuracy speed control, long life and free maintenance.

Intelligent evaporation stands for an overheat protection design that prevents water baths running dry, a detachable panel for superior ease of use from outside closed fume hoods and offers a proven vacuum seal and vapor tube system guaranteed for years of operation!

"CHITRA" TOOTHPASTE MANUFACTURING MIXER consists of a Main Manufacturing Vessel also known as Contra Mixer. Contra Mixer as the name suggest works on the principle of Contra rotation of Blades for simultaneous beating and scraping operation. The mixer is highly versatile and mostly used for manufacturing Tooth Paste, Creams, Cosmetics and other viscous products.The Mixing Assembly consists of series of paddle type blades of appropriate shape to move the material back towards the centre of the container. The paddle type blades are provided on the central shaft which runs through a hollow shaft on which other sets of blades are welded. Both the sets of blades intermeshes with each other and rotates in clockwise and anti-clockwise direction respectively and one sets also scraps the container wall for thorough and uniform mixing of the material. The mixer is so designed to withstand high vacuum applied during the process for optimum mixing. Contra Mixer is provided with a jacket for cooling or heating as per the application. The vessel shall have a shell of suitable thickness with a hemispherical bottom and flanged top dish made out of S.S. 316 plate. The vessel shall be jacketed with MS jacket ( SS304 jacket provided on extra cost on demand, if required ) of suitable with stiffeners suitable for steam pressure of 4 to 5 Kg/cm2. The jacket shall be insulated with 50 mm thick glass wool insulation and shall be cladded with 16 SWG M.S. or SS304 material. The vessel shall be suitable for 600 to 700 mm of Hg vacuum and internal pressure of 3 Kgs / cm2. The top lid of the Mixer m/c shall be provided with hydraulic lifting and lowering arrangement, if required. Hydraulic arrangement will consist of : ( Optional at extra cost )Hard Crome plated HYDRAULIC CYLINDERS ( 2 Nos. ) Limit switches at upper and lower limits Power pack with direction control valve by actuated SPECIAL FEATURESAll contact parts are made out of SS 304 / SS 316 quality material. Compact design requires comparatively smaller floor space. Product container mounted on mounting lugs or legs as required by customer. Hydraulic power pack with cylinders are provided for lowering and lifting movement of top cover with stirrers drive assembly. Lowering and lifting movement of drive assembly will be achieved through hydraulic lifting system for easy of cleaning and changeover of products. (OPTIONAL - Provided On Demand) Fixed product container for safe operation during mixing. Product container having hemispherical shape bottom. As stirrer is a top driven and sealing doesnt comes in contact with product, there isnt any black particle contamination problem. Steam circulation jacket for mixing bowl, to heat the product during operation & water circulation facility to cool the product during or after mixing. ( made out of mild steel or SS304, as per customer requirement ) All Non contact parts (general structure) made out of mild steel (SS304 provided on demand, on extra cost) and claded with SS304 or crome plated or made out of SS304 in GMP Model. Contact parts are polished to the mirror finished and noncontact parts are polished to the matt finished in GMP Model. All safety guards & covers made out of SS304 material in GMP model & made out of mild steel & painted in standard model. General structure & all non contact parts are made out of Mild Steel & same will painted in Standard Model. Digital temperature indicator provided to indicate the temperature of the product. (Temperature controller for steam heating is not in our scope of supply.) SPECIAL FEATURESMachine design as per the vacuum application for de-airation of mixing container, to remove air bubbles from the product during mixing for GEL products. ( Vacuum System) vacuum pump is not in our scope of supply. Insulation will be provided on jacket of container. The insulation will be covered with M.S. material in standard model and SS304 material in GMP model. Material discharge from bottom. Flush bottom valve provided for material discharge. M/C provided with Light glass, Sight glass, material inlet, water inlet, steam & washing water inlet, air suction valve for vacuum, vacuum gauge etc... Mixing assembly have two speed facility. Variable speed drive facility for mixing assembly will be provided on extra cost, as a OPTIONAL facility. Digital Timer for Batch time setting. Ampere Meter for main motor. OPTIONAL"PLC" based operating panel for automation. Variable speed drive for main motor for variable rpm of mixing assembly. Online sampling port to take sample of product during mixing. Inline homoginizer or Colloid Mill.