Shearing Machine Dealers in Dhebar Road, Rajkot

• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 400/440 volts
• Automatic Grade: Automatic
• Rated Power: 3 phase
• Warranty: 1year
• No. of cycles: 50 cycles

The Over Crank Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability. This Mechanical over Crank Shearing Machine is provided with high quality single segment knives for longer tool life. Ease in assembling knives reduces down time. The knives blades are four edged. Scale on the black gauge gives instantaneous reading of distance between shear and back gauge. Power Shearing Machine Supplier, in India we are trusted worldwide not only for the robust quality of our machines but also for the assurance of durability and a long life. Features A pair of four edge shear blade Standard front gauge Black gauge manually operated Finger guard fitted in front of hold down for operator protection Details All dimensions are in mm Power supply 400/440 volts, 3 phase, 50 cycles We reserve the rights to alter specifications without notice Undergo stringent quality checks for easy and smooth operation                                                                                

The Shearing Machine, offered by us, is exemplary for its fine quality, and classic engineering. Our team of experts works hard to process the products using advanced technology. While we are one of the well-established manufacturers and suppliers, we accept bulk orders, too, and ensure speedy delivery of the product. The unique selling point of these products is that these are easy to operate, and delivers maximum output. We are situated in Rajkot, Gujarat.

MARUTI Shearing Machines have been designed and developed through structural analysis for continuous production, accuracy and repeatability. FRAME : Ridig steel frame of Maruti Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ramis guided throughout it's length by accurate machined guide ways ensuring proper clearance and clean cut. HOLD - DOWN SYSTEM : Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impression on sheet metal on request. KNIVES : Maruti Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. the knife blades are four edged. LUBRICATION : All bearing parts and guide surface are lubricated through hand-operated lubrication system. FLY WHEEL : The Fly Wheel is made of high grade cast iron & it is balanced for storing & releasing adequate energy forthe operations. MECHANICAL BACK GAUGE : This is the standard equipment provided on all Maruti Shears. Scale on the back gauge gives instantaneous reading of distance between shears and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment. FINGER GUARD : Fitted in front of hold-down for operator protection without obstructing viewing.    

  Frame:Rigid Steel Frames Of Sk shears Are optimally designed to avoid weak sections at aload supports and is of interloked design. the ram is guided throughout its length by hardended & ground guide ways ensuring proper clearance and clean cut. Hold-Down System:Spring loaded mechanical hold-down the sheets securely to avoid slipping and bowing result in clean square cut. Hold Down units are provided with oversize pads to avoid impression on sheet metal. Blades:SK shear are provided with Four Edge, single & segmentally High Carbon,Chromium Steel Blades Suitable for M.S & S.S. Cutting and Extra long life. Lubrication:All bearing parts and guide surfaces are lubricated Through centralize hand-operated Lubrications System. Mechanical Back Gauge:This is a standard equipment provieded on all SK Shears. Scale on the back gauge gives instantaneous reading of distance between shear and back gauge,thus avoiding errors and maintennance encountered in eletronic equipment. Finger Guard:Fitted in front of hold-down for operator safety without obstructing viewing. Standard Eqipment:Electronic System consisting of motor & Control Panel of Starter, Ger and Wheel guard ,V-belts,Hand operated back Gauge,Manual Lubrication System, T-slot front gauge, Front scale gauge, instruction Manual. Optional Equipment:Hydraulic hold-down system,Automatic lubrication system,Ball roller or Ball Transfer,Foundation bolts,Extension squaring arm. NOTE: Electricals and Blades are not under Warranty  

We introduce to our customers the most advanced Hydraulic Shearing Machine that has been developed using optimum quality raw material. This Hydraulic Shearing Machine is used widely for cutting large metal sheets. We provide our customers Hydraulic Shearing Machine with the dimensions of 1250x4mm to 6000x25mm. Our range of Hydraulic Shearing Machine is robust and durable with stable and welded frames. We are an eminent Manufacturer and supplier of Hydraulic Shearing Machine in Rajkot, Gujarat. We offer these Hydraulic Shearing Machines at market leading prices.  

We sternly keep a check on the designing and manufacturing of products and ensure that the material is strictly procured from the leading names only. The raw material is examined on the grounds of quality to deliver finest range of products. We ensure on time distribution of wholesale as well as retail consignments owing to an extensive vendor, distributor and logistic facility base.

• Brand Name: Godson
• Max Shear Width: 3000-4000 mm
• Cutting Material: ALL
• Max Shear Thickness: 30 MM

• Rated Power: 5 HP
• Brand Name: Renuka
• Holding Force: 2500 Kg
• Model Name: RVR 330
• Shearing Length: 3000 mm
• MS Normal Rake Angle: 3.15
• MS Maximum Rake Angle: 4
• SS Normal Rake Angle: 2
• SS Maximum Rake Angle: 3
• Rake Angle: 1 Deg 15 Deg
• Rake Angle Range: 0.5-2 Deg
• Strokes Per Minute At Min And Max Ranke Angle: 26-9
• Hold Doens: 15

• Length: 2030 to 4000 mm
• Thickness: 8 to 20 mm (ms)

Pneumatic Clutch & Brake: Electrically controlled & Air operated Clutch & brake combine unit permits high frequency of operation and more flywheel energy for work. Wear on Clutch & Brake is automatically compensated & no adjustment is necessary. Surge Tank, filter, Regulator, Air Lubrication Unit, Pressure Switch etc. are incorporated. Pneumatic Counter Balancer are provided to Counter the Weight of Slide & tooling which help in taking up the Bearing clearances and ease Slide adjustment.

For the diverse requirements of our clients we are involved in offering a wide assortment of Shearing Machine. We offer them to our esteemed patrons after checking them on several parameters under the vigilance of our quality controllers. These products are widely used for cutting to size and cater diverse requirements of the clients.

Our Shaping Machines are specialy designed to Heavy Duty the Various Job requirement in a workshop. Shaping Machines are manufactured with general rigidity, hardness and strength to with stand the heavy strains wear & tear of long use. For maintanance of Original accuracy for a longer period every part is made out of selected materials properly treated and skillfully machined in accurate aligment. The Machine has been designed for long continuous service without adjustment.

Hold-Down springs housed in each guide block pre-load the assembly to provide the clamp action on the material being sheared. Lift off screws, are set at the works to ensure a maximum gap of 6-7 mm. between the table & hold-down griping pads, when the notcher beam is raised. The hold-down is raised and the clamp is released automatically as the notcher beam near the top of stroke. This is accomplished through the action of stops on notching beam. During the downward strokes the arrangements is such that clamp; pressure is applied to the material before notching commences.

We offer Hydraulic Shearing Fixed Rake Angle Machine. WELDOR Light Duty Hydraulic Guillotine Shearing Machine with FIXED RAKE ANGLE is designed to suit Sheet Metal Industries using thin Sheets. . FRAME : Rigid steel frame of "WELDOR" shears are optimally designed to avoid weak sections at load support and is of interlocked design. The table of frame is welded together with support of steel plates. The table top surface is machined with provision of t-slot to facilitate front gauge stopper. Ram assembly is welded with steel plate support. ROLLER GUIDES : The upper beam is guided by three point roller guides. A replaceable hardened Liner is provided for minimum wear. It eliminates lubrication of guides. .

• Brand Name: JAYSON
• After-Sales Service Provided: One Year Warranty
• Brand Name: 2540x3/4mm
• Model Number: JHVRS
• Place of Origin: Rajkot
• Hydraulic Shearing Machine: 1525x3/4mm
• Hydraulic Shearing Machine: 2030x3/4mm
• Hydraulic Shearing Machine: 3125x3/4mm
• Hydraulic Shearing Machine: 4000x3/4mm
• Hydraulic Shearing Machine: 1524x4/6mm
• Hydraulic Shearing Machine: 2030x4/6mm
• Hydraulic Shearing Machine: 2540x4/6mm
• Hydraulic Shearing Machine: 3125x4/6mm
• Hydraulic Shearing Machine: 4000x4/6mm
• Hydraulic Shearing Machine: 1525x6/8mm
• Hydraulic Shearing Machine: 2030x6/8mm
• Hydraulic Shearing Machine: 3125x6/8mm
• Hydraulic Shearing Machine: 4000x6/8mm
• Hydraulic Shearing Machine: 1525x8/10mm
• Hydraulic Shearing Machine: 2030x8/10mm
• Hydraulic Shearing Machine: 2540x8/10mm
• Hydraulic Shearing Machine: 3125x8/10mm
• Hydraulic Shearing Machine: 4000x8/10mm
• Hydraulic Shearing Machine: 1525x10/13mm
• Hydraulic Shearing Machine: 2030x10/13mm
• Hydraulic Shearing Machine: 2540x10/13mm
• Hydraulic Shearing Machine: 3125x10/13mm
• Hydraulic Shearing Machine: 4000x10/13mm
• Hydraulic Shearing Machine: 2030x13/16mm
• Hydraulic Shearing Machine: 2540x13/16mm
• Hydraulic Shearing Machine: 3125x13/16mm
• Hydraulic Shearing Machine: 4000x13/16mm
• Hydraulic Shearing Machine: 2030x16/20mm
• Hydraulic Shearing Machine: 2540x16/20mm
• Hydraulic Shearing Machine: 3125x16/20mm
• Hydraulic Shearing Machine: 4000x16/20mm
• Hydraulic Shearing Machine: 2540x20/25mm
• Hydraulic Shearing Machine: 3125x20/25mm
• Hydraulic Shearing Machine: 4000x20/25mm
• Hydraulic Shearing Machine: 2540x25/30mm
• Hydraulic Shearing Machine: 3125x25/30mm

• Application: Structural Analysis
• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Warranty: 1year

We are a prominent MS Body Treadle Shearing Machine Manufacturer and Supplier in Gujarat, India. We use the finest materials to manufacture MS Body Treadle Shearing Machine. The MS Body Treadle Shearing Machines, offered by us, are designed using the latest techniques and conform to required quality standards. Highlights The Accurate Cast Iron Body & M.S. Body Treadle Shearing Machines with best workmanship. Robust and streamline construction is developed and designed after manufacturer's extensive experience in manufacture ring and sales of such machines. The machine is having wide application in industries such as Tube Light Patti, Tine Barrel, Drum, Laminates, P.P. Caps, M.S. & Steel Cutting, Control Panels & Boards, Calendar Rims, Electrical Stamping / Laminations, Electrical Fittings, Electronics, Containers, Brass, Furniture, Aluminum, Block Makers and other fields. Salient Features Streamline and rigid structure ensures fatigue less and vibration-free working of the machine. Machines are fitted with OHNS quality Four Edge Shearing Blade to avail maximum use of blades. Upper Beam/Ram moves in C.I. Guide ways with accuracy bearing surface and having fine-tuning for compensating wear and tear. The extra heavy duty Treadle with proper weight is spring loaded and very ingenious for operator's convenience which takes minimum pressure while cutting. The springs fitted are of proper compression and strength. Modifiable front & back gauge with through slots which facilitates adjustment of different widths of cuts and avoids any sorts of waves and twisting of sheets while cutting. The setting bolts are provided for lower-fixed blade to adjust vertically when height of blade is reduced following re-sharpening. All lubrication points are provided with lubrication cups at required places to ensure smooth, simple and longevity of machine. Standard Equipments : One Pair Blade, Front-Back and Side Gauge, Sheet Holding Device. Extra Equipments : HCHCR Blade in place of OHNS Blade.

• Brand Name: shailesh/kawa
• 1250x2mm: to 6000x13mm

We are offering gullotine shearing machine, mechanical, pnumatic, hydraulic, nc and cnc gullotine shearing.

We are one of the most acknowledged Manufacturers and Suppliers of highly efficient Hydraulic Shearing and Press Brake Machine incorporated with the latest technologies. Our Hydraulic Shearing and Press Brake Machine is highly in demand by the clients owing to its sturdy construction, trouble-free operation, low maintenance and longer functional life. Hydraulic Shearing and Press Brake Machine that we offer is widely in demand by the clients for carrying out different industrial tasks.

The capacities ranging from 4 mm to 25 mm and lengths from 2000 to 4000 mm with several optional features like motorized blade gap adjustment, ball transfers, extra long squaring arm, front sheet support, auto lubrication, auto adjustment of cutting force, and also CNC control systems to make the operation completely automatic

• Condition: New
• After-Sales Service Provided: No overseas service provided
• Power Source: Hydraulic
• CNC or Not: CNC

• Max Shear Width: 3000-4000 mm, 1000-2000 mm, 2000-3000 mm
• Automatic Grade: Semi-Automatic, Manual, Automatic
• Cutting Material: Aluminum, Copper, Iron, Carbon Steel, Stainless Steel
• Max Shear Thickness: >6 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4- 5 mm, 5-6 mm
• Condition: New
• Strokes per min: >12, 8, 3, 10, 12, 5 per min

hydraulic shearing machinery, Mechanical Shearing Machines

We are manufacturer, exporter and supplier of the best variety of hydraulic shears, portable hydraulic shears, hydraulic shearing machines, shearing machines, hydraulic metal shears, hydraulic shears portable which find great relevance in almost all industries. Manufactured by our efficient engineers and technicians these are easier to use and have all the essential features which make these worthy to be purchased. Their features include:

Press Brakes

Shearing Machine, Light Duty Lathe Machine, C - Type Power Press

Planning Machine, Boring Machines, Lathe Machines

hydraulic shearing, c hydraulic press, horizontal hydraulic press

Hydraulic Plate Bending Machine, Hydraulic Iron Worker Machine

hand press brakes, metal machine, Sheet Metal Machine

Hydraulic Shearing Machines, Power Press Machines