Sheet Making Machine Dealers in Rajkot

• Automatic Grade: Fully Automatic
• Voltage: 440v-50Hz-3phase
• Type of Material to Be Processed: PPGL / PPGI
• Number of Forming Stations: 24
• Outer Diameter of Shaft: 75
• Main Motor Power: 10 HP
• Roll Forming Speed: 15-20 meter/min
• Main Motor: ABB
• Cutting System: Hydraulic,Automatic
• Weight of Coil: 5000kg
• Length of the Machine: 25 ft approx
• Weight of Machine Approx: 12 Ton
• Min. Width of Coil: 1220 mm
• Max Width of Coil: 1450 mm
• Min. thickness of Coil: 0.4. mm
• Max Thickness of Coil: 0.8 mm
• Automation Level in Performance: P.L.C Controlled Length
• Accuracy Level: Length : +/- 2 M.M.
• Bend /twist: 1.5 MM/MTR
• DIMN: +/- 2 M.M
• Weight of the Machine: 2500 kg
• Capacity: 5000 Kg Max
• Coil Id: 510 mm
• Max Coil Width Can Be Loaded: 1450mm
• Min Coil Width Can Be Loaded: 500 mm
• Tank Capacity: 120 Ltr
• Motor: 5 HP, 3phase, 1440 RPM, Flange, ABB
• Direction Control Valve: NG-06-24v-DC
• Pump: 1P series 27 LPM
• Section Filter: SC3-30
• Return Line Filter: T1-F2-08-B25 (Hydro line)
• Level Guage: LG-03 (Hydro line)
• Working Pressure: 90 kg/cm2

• Specifications: Maximum sheet width that can be formed : 1250 mm,Horizontal distance between shafts : 500mm etc.

We offering finest quality Roof Tile Making Machine to clients. This is the fastest machine on the market. The newly servo drive punch simultaneously advances and punches with accuracy as the material continually moves through the machine. Not only does this considerably increase the speed of the roll forming machine, but also increases the life of the equipment tools.

• Total Hp For Line: 15
• Speed Of The Machine: 0 To 25 mt / minute
• Maximum sheet width that can be formed: 1450 mm
• Maximum sheet thickness in PPGI/PPGL Strips that can be formed: 0.5 mm
• Horizontal distance between shafts: 500mm
• Number of forming stations: 23 nos.
• Size of machine: 9500 x 1700 x 1100 mm
• Coil weight: 5 MT Max
• Coil width: 1450 MM
• Coil bore: 450 MM min, 510 MM max dia.
• Mandrel movement: Manually adjusted
• Back Tension: Manually adjusted

We provide you the fully automatic Corrugated Sheet Making Machine with punching of Shhet in the various models and Forming sizes. Our manufacturer is one of the earliest one in India to develop the main Corrugated roll forming machines. So we have ability to design custom Corrugated Sheet Making Machine according to customer sample or profile drawings.

Technical specifications maximum sheet width that can be formed : 1550mm maximum sheet thickness in crca strips that can be formed : 1 mm horizontal distance between shafts : 400mm number of forming stations : 12 nos vertical station : 11 nos total hp for line : 13 speed of the machine : 7 mt.minute size of machine : 6500 x 1100 x 1100 mm mandrel uncoiler coil weight : 2 mt max coil width : 1200 mm coil bore : 450 mm min, 510 mm max dia. mandrel movement : manually adjusted back tension : manually adjusted entry gate entry gate will be provided for movement of sheet to roll former. Main base the main base is ms fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands. Mill stands (station) the stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings. Roll shafts the roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling. Drive the drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 hp motor tooling

Ø  Characteristic ·         This roll forming machine can roll form metal roofing sheet. After roll formed by this roll forming machine, the surface will be very smooth and beautiful without any scratch on surface. ·         Roll forming process: uncoiler, roll forming, cut to length. ·         Fully Automatic Control System with PLC. ·         Easy operation: Key in the length and quantity on the control panel. ·         One year warranty. ·         We also can do a custom roll forming machine, i.e. we can design the machine according to your specification and profile drawing. ·         One roll forming machine only can produce one profile.  Ø  Composition of machine line ·         Hydraulic single head uncoiler ·         Roll forming main machine ·         Hydraulic cutting system with automatic Cut-To-Length ·         Control panel with fully automatic control system with PLC Ø  Specification SHEET THICKNESS 0.3 ~ 0.8 mm FORMING SPEED 15 ~ 20 M per minute ROLLER SHAFT DIAS Φ85 mm ROLLER STATIONS 15 ~ 22 MOTOR OUTPUT 10 ~ 20 HP LENGTH x WIDTH L 8 ~ 10 M  W 1.4 ~ 1.8 M SINGLE HEAD UNCOILER 5 ~ 8 Ton   Ø  Demanded for   Gardens Factories Exhibition Canters Villas  

• Horizontal distance between shafts: 500mm
• Number of forming stations: 18 nos.

We provide you the fully automatic Roofing Sheet Making Machine with punching of Roof Sheet in the various models and Forming sizes

Air Bubble Wrap Sheets, a flexible and transparent plastic sheting containig numerous small air pockets. The sheets offer cushioning and scratch protection far superior to packing paper and are used to protect items during shipping and storage. Bubble wrap is lightweight, waterresistant, reusablenon-scratching and is used for packing fragile items. It can be used to cushion medium to heavy weight products.

Roofing Sheet Making Machine, Roll Forming Machine, Sheet Forming Machine

sheet making machine, Rolling Shutters Making Machine, Roll Forming Machine

Aluminum Roofing Sheet Making Machine, Forming Machine

sheet making machine, Forming Machine, Banding Machine, Rolling Machine