Sheet Metal Machinery Dealers in Mavdi, Rajkot

• Certification: CE Certified, ISO 9001:2008
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V, 550V
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Warranty: 1year
• Type: Metal Cutting Machine
• Application: Cutting Metal Sheet
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Power: 1-3kw, 12-15kw, 15-18kw, 18-21kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic

Technical specifications maximum sheet width that can be formed : 1550mm maximum sheet thickness in crca strips that can be formed : 1 mm horizontal distance between shafts : 400mm number of forming stations : 12 nos vertical station : 11 nos total hp for line : 13 speed of the machine : 7 mt.minute size of machine : 6500 x 1100 x 1100 mm mandrel uncoiler coil weight : 2 mt max coil width : 1200 mm coil bore : 450 mm min, 510 mm max dia. mandrel movement : manually adjusted back tension : manually adjusted entry gate entry gate will be provided for movement of sheet to roll former. Main base the main base is ms fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands. Mill stands (station) the stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings. Roll shafts the roll shafts dia. 60mm will be manufactured from quality steel and will be keyed to locate tooling. Drive the drive to the roll former will be by means of a gear box system and chain. The main drive will be provided by means of 10 hp motor tooling

• Size of Machine: 8" x 34" x 19"
• Weight: 40Kg Approx

Sheet metal cutting machine: 3'' TO 15'' HAND OPERATED MODEL, M.S., Aluminum, Brass, S.S., G.I., Metal, Silver Circle Cutting Machine, 2 PC CUTTER D2 METAL, M.S. STAND & C.I. BODY, CAP. SWG 20 - 0.90MM, Weight 40Kg Approx.

• Automatic Grade: Automatic
• Voltage: 440 V
• Frequency Range: 50 Hz
• Phase: Three Phase
• Power Source: Electric
• Available Material: Cast Iron and Mild Steel

Sheet Expanded Metal Machine

Special Purpose Machine For Metal Finishing, Container Panel Forming Machine