Shreeji Engineering Samrat Industrial Area, Rajkot, Gujarat

Application This machine is mainly used in processing Valve, Pump body, Auto parts, Construction machinery parts etc.It can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere.It worked with Huadian PLC Controller, It can realize automation, high precision, multi variety and mass production. Main features 1,This machine worked with Huadian PLC Controller, it can work for many procedures,for example, End face hole , Median orifice, Bore-hole and Sphere. It’s  CNC Controller has good compatibility, powerful function and easy operation. 2,The Feed  Sliding table guideway use high quality gray cast iron,trough rough casting, tempering and aging treatment by three times. Fully eliminate the residual internal stress, The surface of the guide way adopts super audio quenching and the hardness is up to HRC55. Through high precision guide way grinding processing, to ensure the accuracy, rigidity, stability. 3,The transmission part adopts precision ball screw and interpolation to eliminate the gap,to ensure the machine drive steady.4,The power head is equipped with three – stage manual speed change with powerful motor,achieve low speed but high torque, can withstand heavy cutting load, improve processing efficiency. 5,The working equipment adopts Hydraulic pressure-automatic clamping, to improve efficiency and reduce labor intensity. 6,The machine adopts Centralized lubrication, to ensure that the full lubrication of each moving parts then improve the service life of machine tools.Primary structure Our machine is mainly composed of body, power head,CNC feed sliding table,working  equipment,and equipped with an independent electric cabinet, a hydraulic station, a centralized lubricating device, a cooling automatic chip remove device, and a high protection device. 1,Body The Body adopts integrated casting body with high quality, trough manual tempering and aging treatment by three times. The surface of the guide way is treated by super audio quenching, the structure is reasonable,to ensure rigidity, precision and the stability of the machine. 2,The power head The body of power head is adopt excellent casting,spindle use material 20GrMnTAi,with forging, tempering, carburizing and quenching, high precision grinding out and in. The bearing adopts NN30 series high precision double row cylindrical roller bearing to ensure the rigidity and precision of the spindle.

The DL-MHSTY series turning centers are designed with 45 degree one piece slant bed structure, double spindles and double turrets with Y-axis, X,Y,Z three axes under control, 12 positions servo driven on both turrets, can accomplish bidirection machining of the work piece. Each turret can work with main and sub spindle (C1, C2) to achieve synchronous 4 axes movement, and complete complicated shape components machining.

The DL-MH series are 3 axis turning centers for turning and milling parts in a single setup. The machines are controlled by a FANUC Oi-TC system. For the DL-MH series, DMTG has developed a specially reinforced cylindrical one-piece base casting with a 45-degree slant bed design. This base design accommodates a much heavier loading leading to exceptionally high rigidity, good vibration absorption and great stiffness to ensure very high accuracy machining. The wide-range main spindle AC servo motor provides the machine with particularly high torque at low speed, and, together with a high resolution spindle pulse encoder and a hydraulic spindle brake ensures high accuracy indexing and milling during C axis work.

We are the pioneer to make this model. 1. It is the heavy chaff cutter machine 2. It is the machine ,you can use it two ways, (a) With electronic motor (b) With tractor 3. We are the making this models in 3 different sizes (a) 3 feet size. (b) 3.5 feet size (c) 4 feet size 4. if you want to use in electronic motor, then you have to joint or connect the motor in following instruction. (a) 3 feet size joint 5 hp motor with 3phage, (b) 3.5 feet size joint 7.5 hp motor with 3 phage (c) 4 feet size joint 10 hp motor with 3 phage 5. other part of machine are, heavy gear chakkar ,heavy 4 blade with heavy blade stand , pack pedicles ,heavy Bloor or fan which can far away grass or other material almost 8 to 10 feet, so you can easily storage .heavy stand in short its totally heavy machine . 6. Our 1 machine is sufficient to 25 to 5000 animals so you can image the capacity of our machine

Product Introduction The travel of X1 axis: 520mm The travel of Z1 axis: 1180mm The travel of Y axis: ± 105mm Rotary angle of B axis: ± 102.5° Rapid traverse of upper carriage (X1 I Y I Z1): 24/16/30 m/min Max turning diameter of upper carriage: 500mm Tool shank of upper carriage: Capto C6 Tools in the magazine: 30 tools Motor power of 2nd spindle: 14.5/18.7Kw Max. Speed of 2nd spindle: 5000r/min Spindle bore taper of 2nd spindle: metric 100 Rapid traverse of 2nd spindle: 24m/min Travel of Z3 axis: 1020mm Travel of X2:220mm   Travel of Z2:1100mm Rapid traverse of lower carriage: (X2/Z2): 24124 m/min Max turning diameter of lower carriage: 330mm Old tool shank of lower carriage: 25 x 25 Max.Swing over bed:1000mm Max. Part length: 1000mm Max. Machining length: 1500mm The Control available: siemens840D Machine overall dimension: 7230 x 3150 x 3755mm Machine weight: 15000kg Max.Speed of 1stspindle :5000r/min Motor power of 1 st spindle: 18.3122.4 Kw Spindle bore taper of 1st spindle: metric 100 Spindle nose: ISO A2-8 Spindle through-hole dia.: 80mm

45-degree slant bed design of one piece construction. Square induction hardened guideways bonded with Turcite-B material enable sound dynamic characteristics. Wide range AC servo motor is equipped in the main transmission system for big torque output at low speed. Big bore pneumatic driven chucks are fitted to both the front and rear end of the spindle. Tailstock with pneumatic driven quill and 8 station electric turrets are also equipped on this machine. It is an ideal machine for oil field, chemistry, engineering, etc industries, i.e.oil pipes, well drilling rods, etc.

The machine features horizontal straight bed design and is in compliance with safety standards. Main machine bodies, ie. bed, support leg, etc are of resin sand casting with timing treatment, which guarantees superb stability of the machine. Horizontal and cross travels are driven by servo motors together with high precision ball screws and high rigid precision bearings. Pulse encoders are equipped to form a semi-closed-loop control. High frequency induction hardened guideways bonded with Turcite-B material enable fast response of moving axes, high accuracy and long machine life. With unique auto gear changing mechanism, the machine enjoys a short tool setting time and high working efficiency.

All main components, bed, headstock, saddle, plinth, etc., are high quality solid castings. Low friction Turcite-B coating on mating surfaces between saddle and guideways. Precision ballscrews and highly rigid precision bearings ensure accurate positioning and heavy cutting capability. Centralized oil system provides forced automatic lubrication onto ballscrews and all mating surfaces. Choice of two model ranges. The CKE-Z series has automatic headstock gear changing, high spindle speed with wide range, and low noise levels of under 80db. The CKE-Iseries, with independent spindle structure, utilizes a frequency converted spindle motor or servomotor to offer stepless high spindle speeds. Operator adjustable control panel enables convenient tool setting. Fully enclosed guards with interlock offer a waterproof and chip-free environment. Horizontal 4-P automatic indexing tool post is provided as standard, while vertical 4-P tool post, horizontal 8-P tool post, quick-change toolpost, etc can also be supplied to suit customers’ specific requirements. Optional pneumatic or hydraulic chuck and tailstock are available. FANUC, SIEMENS, FAGOR, etc control systems can be supplied. E-handwheel function is also available.

We are a prominent chaff cutter manufacturer and supplier in jasdan, gujarat. Chaff cutter that we offer is fabricated under the supervision of experts and is guaranteed for long service life. The best quality components used in the production process ensure high performance and low maintenance of chaff cutter. Our chaff cutter cuts the fodder in a uniform manner which makes it easy for the cattle to digest and results in high milk production. Why our chaff cutter? durablereduces wastage of foddersuperior functionalitylow maintenance

Application Huadian CNC machine special for Valve is mainly used in processing Valve, Pump body, Auto parts, Construction machinery parts etc.It can work for many procedures,for example, End face, The outer circle, The front edge,Inner hole, Grooving, Screw thread, Bore-hole and Sphere.It worked with Huadian CNC Controller（or Siemens,Guangzhou CNC Controller）, It can realize automation, high precision, multi variety and mass production. Main features 1,Our machines all feed with Huadian CNC Controller（or Siemens, Fanuc）, can achieve double spindle linkage then finish to process Bore-hole, Screw thread and Sphere. The  CNC Controller has good compatibility, powerful function and easy operation. 2,The Feed  Sliding table guideway use high quality gray casting iron,trough rough casting, tempering and aging treatment by three times. Fully eliminate the residual internal stress, The surface of the guide way adopts super audio quenching and the hardness is up to HRC55. Through high precision grinder processing, to ensure the accuracy, rigidity, stability. 3,The transmission part adopts precision ball screw and interpolation to eliminate the gap,to ensure the machine drive steady. 4,The power head is equipped with three – stage manual speed change with powerful motor,achieve low speed but high torque, can withstand heavy cutting load, improve processing efficiency. 5,The working equipment adopts Hydraulic pressure-automatic clamping, to improve efficiency and reduce labor intensity. 6,The machine adopts Centralized lubrication, to ensure that the full lubrication of each moving parts then improve the service life of machine tools.  

Since China’s first special purpose machine and first transfer line were born in Dalian Machine Tool Group Corporation in 1956 and 1960 respectively, over 10,000 sets of special purpose machines and over 360 sets of transfer lines have been developed and manufactured. They are widely used in industries, of automotive, internal combustion engine, agricultural machinery, civil machinery, general machinery, light industry machinery, electric generator, diesel locomotive etc.

Shreeji engineering has established itself as a renowned thresher machine manufacturer and supplier in jasdan, gujarat. Our thresher machines are known for their high performance and easy operations. Available in different horse powers, these thresher machines can effectively thresh different types of crops in a field like mustard, wheat, maize, sunflower, pulses etc. These thresher machines are economically priced and offer economic solution for crop threshing. why our thresher machine? long service lifereduces wastage of foddersuperior functionalitylow maintenance