v.h.met alloys Kotda Sangani, Rajkot, Gujarat

In this process, a metal mould/die is mounted on above a sealed furnace containing molten Aluminium metal. A riser tube connects the bottom of the die to the molten metal bath. The sealed furnace containing the molten metal is pressurised (typically 3-35 psi), and the metal is forced up into the mould/die slowly at a steady predeternmined rate. It is important to determine the rate of filling to avoid entrapment of air and turbulence giving homogenous defect free parts. The pressure is usually given to feed the defects like shrinkage normally associated with casting process. Once the casting has solidified (time duration 1-4 minutes typically), the pressure is released and the molten metal falls back into the bath, and the casting is ejected. Then the preparation for the next cycle begins. There is very high yields 90-95% in case of Low Pressure Die Casting leading because in effect the casting in a way acts as the gating system.

In this process, a metal moulddie is mounted on above a sealed furnace containing molten Aluminium metal. A riser tube connects the bottom of the die to the molten metal bath. The sealed furnace containing the molten metal is pressurised (typically 3-35 psi), and the metal is forced up into the moulddie slowly at a steady predeternmined rate.

VH Met Alloys has catered to parts from industries including recretaional, lighting, healthcare, aesthetic & commercial amongst other industries. Casting molds must be designed to accommodate each stage of the process. For part removal, a slight taper (known as draft) must be used on surfaces perpendicular to the parting line so the pattern can be removed from the mold. To produce cavities within castings (such as for engine blocks and cylinder heads used in cars), negative forms are used to make cores. Casts of this nature are usually produced in sand molds. Cores are inserted into the casting box after the pattern is removed. We can fulfil the requirement of Aluminium castings for any industry and deliver fully machined castings as per their requirements.

At VH Met Alloys we are able to produce pressure tight parts, high strength and helium leak proof parts which is the order of the day for the Electrical Industry today. We have employed new techniques to achieve these criterias and keep on improving our methods to cater to this industry. We have basetanks, covers, flanges, insulating flanges, bellows flanges, circuit breakers, electric boxes of various sizes, motor housings etc for our esteemed multinational clients in the Electrical, Power and T&D sector. Having a positive quality management system, we are captivated in Manufacturing, exporting and supplying a wide compilation of Aluminum Die Casting for Electrical Industry in Rajkot, Gujarat, India. Appreciated for their durability, offered die castings are highly demanded amid our esteemed patrons. More to this, these are well inspected before finally providing these at the end of our patrons.

At VH Met Alloys we are able to produce pressure tight parts, high strength and helium leak proof parts which is the order of the day for the Electrical Industry today. We have employed new techniques to achieve these criterias and keep on improving our methods to cater to this industry.

The Auto Industry is growing at a fast rate in Gujarat and neigbouring areas with very high local demand. A number of national and international auto manufacturers are moving/ starting new plants near Rajkot. Aluminum Castings are required in many industries. This type of casting has successfully replaced iron casting as it reduces component's weight by half. Various auto producers are looking for fields where they may replace iron parts with aluminum parts. Some of the vital features comprises lightweight, good corrosion resistance, retains strength at high temperatures, high dimensional stability, high electrical and thermal conductivity, high dimensional stability, etc. Many aluminum castings manufacturers, aluminum castings suppliers, and exporters are engaged in offering high quality aluminum castings.

For many years, we are into the business of manufacturing and supplying qualitative Aluminium Sand Mould Casting. This casting is used for manufacturing non ferrous casting by filling molten aluminium, copper or zinc into a sand mould. Professionals of our team interact with our clients and prepare a drawing as per their requirement to manufacture this casting. Being a quality-oriented company, we assure our esteemed clients that this casting is the best in quality. This casting is available in the market at affordable price within promised time frame Manufacturer & Supplier of a wide range of products which include Aluminium Sand Mould Casting such as Aluminum Sand Mould Casting, Aluminum Castings, Aluminum Casting Parts, Aluminum Sand Castings, Sand Mould Castings, Sand Castings and many more items.

We provide qualitative Aluminium Alloy Ingots for the clients, which are highly acclaimed by the clients for their excellent yield and quality. We have firmly positioned ourselves as one of the distinguished Alloy Ingots supplier based in India. Our Aluminium Alloy Ingots are available in varied grades and can be customized as per the requirement of our esteemed clients. We Supplying Aluminium Alloy Ingots from the pure and secondary aluminium, using technologically advanced methods in producing the Aluminium Alloy Ingots.