Ball Valves Dealers in GIDC, Rajkot

• THICKNESS: Min. 3.0mm/4.0mm overall

Fully Lined Ball Valve are generally made from Cast Ductile Iron with lining. It is a Full Port, Two PC design, Bolted Body Construction with Integral Ball Stem Unit, Replaceable Seat, Bubble Tight Shut Off, Glandless Design, Maintenance Free, Full Flow Efficient, Low Torque manually lever operated for easy operation.

• Size: 65mm
• Construction: Single Piece Body
• Seat: PTFE
• Working Pressure: 15 Kg.
• Features: Easy to Handle, Corrosive Resistance, Impact Resistant, Long Life and Best-Quality

Flair Three Way Ball Valves – Thoroughly Tested and Highly Versatile   We manufacture a highly versatile Three Way Ball Valves with a rugged design with the capability to handle a wide range of liquids and gases. Our Three way and Multiport valves are designed, manufactured, tested and comply with the requirement of BS 5251 Section One and BS 6755 Part 1. /API 598/API 6D. We design and manufacture products according to requirement of our customers. Valves are supplied with gear or lever type changeover. For an automatic change over direct mounted, best quality electrical actuator or the pneumatic motor is provided as per specific demand of customers. Ball valves are used in different industries where there are need of tight shut-off to transfer liquids, gases, as well as liquids with suspended solids. Three Way Ball Valves provide fast and easy access for valve maintenance. Our 3 Way Ball Valves are easy to operate, maintain and it regulates high pressure, high volume and high temperature flow. It allows functioning without any side loads. It does not require lubrication. Three way ball valves are widely used for pipelines to switch the direction of flow, and allow switching on two flow lines with each other perpendicularly. It is used for either diverting or mixing application. In applications where three way ball valves are used, the liquid circuit will split into two separate loops, variable and constant flow rate. The total flow rate stays constant in these valves.   Material and Construction:   Various grades of Casting are used to manufacture the valves. Most commonly used are: IS 210, A 216 Gr WCB, A 351 Gr CF8, CF8M, CF3, and CF3M with PTFE as Sealing. Valves may be supplied in some special material on request. Valves are available in Full Bore or Reduced Bore with L or T Port type Construction with manual or Gear operated Adequate strength housing Reliable tightness Easy to operate & Maintain Highly Versatile Longer service life Low cost – Initial as well as service cost Petrochemical Chemical Process Process Industries Refineries Pipeline applications Water & Waste applications

• Material: PVC
• Size: Customized
• Country of Origin: Made in India
• Surface Finishing: Glossy
• Usage/Application: Ball Valve Grip
• Dimensions: Customized

Segmented Ball Valve is designed to provide effective control for demanding applications. It is a rugged design segmented ball valve which overcomes the problems of harsh, particle entrained processes, and fibrousunclean services. The VFlo also provides accurate, reliable control in a broad range of applications, such as Chemical, Power and Oil & Gas, Petro-Chemical & Pulp & Paper.

• Material: UPVC
• Production Capacity: High
• Quality: Superior

We comprehend that natural and physical damages can cause harm to goods and hamper with the quality. Therefore, we make sure our products are wrapped firmly with superior packaging supplies. Due to our exceptional and completely secured payment procedures, we have successfully gained full customer satisfaction. We make available varied payment procedures to ensure smooth transactions.

We are offering upvc ball valves we are manufacturer of wide range of upvc & pp ball valves which made from good quality material and tested them by our skilled team of experts on different parameters of quality. some of excellent feature : * higher standard & higher durability * heavy duty and long life quality * suitable for high pressure areas * leak proof * easy fittings * extensively used in agricultural and domestic sector our entire range of ball valve is available in industry leading prices.

Bag Size 20 x 10 inch Application Plumbing Size 3/4" , 1" Brand Ziptron Color Cream Material CPVC Size in mm 20 mm Size in inch 3/4 inches Number of pieces 200 pieces

• Country of Origin: Made in India
• Media: Water
• Size: 1/2, 3/4 ,1
• Color: White
• Type: PVC
• Pressure: Medium Pressure
• Valve Size: 1/2" to 2"
• Working Temperature: 10 TO 15 KG
• Connector Type: plane
• Warranty: 2 years
• Package: one
• Temperature Of Media: 10 TO 15 KG
• Handle Color: yellow
• Usage/Application: AGRICULTURE

• Size: Standard
• Material: Cast Iron
• Certification: ISI Certified
• Feature: Blow-Out-Proof, Casting Approved, Durable
• Color: Black
• Thread: Consistent Straight - Deep Thread

• Material: Metal
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pattern: Plain
• Feature: Rust Proof
• Color: Metallic
• Surface Finish: Polished

• Material: Metal
• Length: 0-100mm, 100-200mm, 200-400mm
• Application: Engine Use
• Color: Black
• Pattern: Plain
• Pressure: High Pressure, Low Pressure
• Feature: Blow-Out-Proof, Casting Approved, Investment Casting, Smooth Finish And Robust Design
• Warranty: 2yrs

These Small Engine Valves ensure the smooth working and long life of the engine. We ensure our entire range of products is per domestic as well as transnational quality standards, optimum grade and worth the price paid by purchaser. We have advanced packaging systems available to make sure that the products are packed using the experts approved packaging stuff. We source the material from the leading vendors in the industry.

• COLOR: SKY BLUE
• SIZE: 1/2" TO 12"

We offer industrial valves.

Plain Black Leather Glove, Plastic Valves, PTFE Sheets, Graphite Rings

Flush bottom valves are a member of quarter-turn valves family that only needs to be rotated quarterly to operate the flow of liquid. Commonly found in toilets, it is an inevitable part of the bathroom. The flow of water is basically restricted in the tank unless the flush is pressed quarterly.

Strainer, Forged Valves, Dual Plate Check Valve, Check Valves

• Material: Brass
• Valve Size: up to 1/2 inch
• Features: Heavy duty pipe, Non corrosive in water
• Application: Water
• Connector Type: Threaded
• Operating Temperature: up to 50 degree C

• Features: Rust Proof, Quality Tasted, High strength, Blow-Out-Proof , Casting Approved, Durable ,Investment Casting,
• Material: Carbon Steel, PP , Stainless Steel, UPVC
• Application: Gas Fitting, Oil Fitting , Water Fitting
• Color: Silver, Grey, Black
• Condition: New,Old
• Packaging Type: Plastic Bag, Corrugated Box

We manufacture a highly versatile Three Way Ball Valves with a rugged design with the capability to handle a wide range of liquids and gases. Our Three way and Multiport valves are designed, manufactured, tested and comply with the requirement of BS 5251 Section One and BS 6755 Part 1. API 598API 6D. We design and manufacture products according to requirement of our customers.

We can manufacture BALL VALVE castings sizing from 1" to 24" with pressure rating 150# to 2500# with maximum single pc weight of 600 kgpc As per the Indian & overseas standards

• Country of Origin: Made in India
• Pressure: High Pressure
• Media: Water
• Valve Size: 4 Inch
• Features: Precise design, Dimensional accuracy, Sturdiness

Wafer Butterfly Valve, resilient seated butterfly valves

Solid Ball Valve, PP Thread Flange, Threaded Foot Valve for Sanitary

Technical Data Design & Manufacturing STD: BS 5351, API 602, IS:9890 Testing & Inspection STD: API 598 BS : 5146 Face to Face: as per ANSI B 16.10 End connections: 16 Bar max (228 PSI) Temp. Rating: Screwed : (BSP, BSPT, NPT)

Ball Valve, Rubber Products

Ball Valve, AGRI pipe fittings