Control Valves Dealers in Rajkot

• Voltage: 12DC,24DC,110AC,220AC
• Flow: 800,1100,2000,3300 lpm
• Ip Rating: IP65
• Voltage Fluctuation: +/- 10%
• Sizes: G1/8,G1/4,G3/8,G1/2 inch
• Response Time: 0.01 sec

• Type: Massey Ferguson
• Brand Name: Bon
• Color: Silver
• Model Number: 189427M91
• Place of Origin: India

Product Code : B4028 Brand Name : Bon Product Specification Control Valve Hard MF-1035 This Control Valve Hard MF-1035 Has Part No. 189427M91

• Port Size: In/Out - 1/4 Inches BSP & Exhaust - 1/4 Inches BSP
• Media: Compressed Air, Filtered & Lubricated
• Model No: STA1, STA1Z
• Type: 3X2
• Design: Spool with Cartridge Type
• Working Pressure Range: 2 - 10 bar
• Ambient/Medium Temperature: 5°- 60° C
• Flow: 1200 lpm
• Materials of Construction: Aluminium, Nitrile, Brass, Polymer
• Coil Width: 26 mm
• Coil Bore: 10 mm
• Voltage (V) + 10%: AC (50Hz, 60Hz) - 24V, 110V, 230V DC 12V, 24V
• Power Consumption: AC-6W, DC-5W
• Duty Cycle: Continuous
• Class of Insulation: Class H
• Type of Coil Protection: IP65
• Features: Cartridge Type design for Long life. Compact design. Manual Override. Single and Manifold Mounting. Low Power Consumption. Fast responce time at maximum 1500 cycle/ min. Lubrication not essential. Wide range of coil voltages

• Material: Aluminium
• Media: Air
• Working Pressure: 10 Bar
• Diameter: 12mm
• Application: Regulate the Flow Rate of Compressed Air

• Size: Available In Different Sizes
• Material: Plastic
• Application: Water Fitting
• Feature: Durable
• Pattern: Plain
• Pressure: High, Low, Medium

Shri Ram Plastic is the one-stop solution for your Automated Water Level Control Valve. Our company manufactures valves that require no manual mediation, float or sensors. Our altitude control valves keep the level of the concerned liquid to its predetermined level. Our valves have one and two-way control systems installed in them. Our Automated Water Level Control Valve is available in different sizes as per the requirements of our customers. We are adequately stocked on this. Made from superior grade plastic, it is suitable for water fittings. Highly durable, it has a plain pattern and withstands high, low and medium pressures.   At Rajkot in Gujarat, we have a modern plant equipped with technologically advanced machinery to manufacture Automated Water Level Control Valves that responds very quickly to changes and adjustments. Our valves can be modulated as per the requirements. We are listed as the top manufacturers of this valve because of the dedication and integrity that we follow in our business policies.

• Type: Tractor Parts
• Brand Name: Pentech
• Place Of Origin: Rajkot  
• Range: Clutch Release Palate, Hyd. Pump Control Valve Guide Square, Hyd. Pump Oscillator etc.
• Features: Fine finishing, Durability, Resilience Heat resistance, Corrosion resistance
• Item Code: 02

• Weight: 10kg
• Packaging Type: Carton
• Valve Size: 2inch
• Brand Name: SRB
• Material: Stainless Steel
• Certification: ISI Certified
• Color: Steel
• Automatic Grade: Automatic
• Country of Origin: India
• Media: Water
• Color: Steel
• Specialities: Casting Approved
• Type: Flow Control Valves
• Condition: New
• Finishing: Polished
• Packaging Size: 20 Pieces
• Application: Water Fitting
• Product Name: Drinking Water Flow Control Valves
• Size: 5LPM - 25LPM

• Brand Name: NOVA

we put forth for our clients a wide array of ball valve single piece (screwed end). these products are manufactured by the team of skilled & efficient professionals who are experts in their area and well aware with the exact demands of clients. Our products are available at the most affordable prices and can also be customized in varied sizes as per the clients’ preferences. Some of their attributes are as follows:

We are the main supplier of this product.

• Material: Brass
• Certification: ISI Certified
• Color: Golden
• Finishing: Polished
• Warranty: 1 Year
• Mounting Type: Horizontal
• Size: 15-40 mm

• Country of Origin: India
• Material: Stainless Steel
• Media: Water
• Type: Flow Control Valves
• Application: Water Fitting
• Condition: New
• Finishing: Polished
• Corrosion Resistance: Yes
• Specialities: Non Breakable, Durable

Flow control valves are used in pneumatic systems to regulate the flow rate of compressed air. By controlling the flow rate, the speed of the pneumatic cylinder can also be regulated directly. In addition, a good throttling valve contributes to reducing wear due to a lower kinetic load.

Features: Investment Casting SS 140 | 304 | 316 Availabe Sizes: 1/2 | 3/4 | 1 TYPICAL APPLICATIONS   DRIP, TRACER: The FS600 Thermodynamic stream trap is commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral Strainer and these traps can be used on tracing applications; however, thermostatic traps are normally recommended for this service. Ideal for outdoor application that Are subject to freezing and for superheated steam conditions   HOW IT WORKS The thermodynamic trap has cyclic on-off operation with a disc that is pushed open by incoming condensate and closes lightly when steam tries to escape.   FEATURE   Integral strainer protect trap from contamination   Hi pressure applications up to 600 PSIG   Hardened stainless steel seat and disc for extended service life even at high pressure   Singltrap will operate over the entire pressure range of 3.5-600 PSIG [Not recommended for use below 10 PSI]   Suitable for superheated steam   Freeze proof when trap is piped in a vertical orientation for complete drainage of condensate   Tree-hole balanced discharge extends life of the seat area   Trap will function in any orientation (horizontal preferred)   SAMPLE SPECIFICATION The steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer.   INSTALLATION Trap can be installed in any position; however horizontal is preferred. Installation should include isolation valves. Do not weld or damage can occur to the seat area.   MAINTENANCE If trap fails, close isolation valves and remove cap. clean disc and seating surfaces and replace cap and disc with grove side toward seat.

• Brand Name: S E

We manufacture and supply a gamut of Single Piece Ball Valves that is highly demanded on an industry wide basis. These Industrial Valves are manufactured using top quality metal sourced from the reputed vendors. Using the latest technology to develop efficient, user-friendly designs, these Industrial Valves fulfill varied needs.

・For steam (Can be used with air and water.)・Low pressure loss due to angle seat structure・Reduced leakage with rubber seal・Long service life: 3 million cycles (Steam), 5 million cycles (Air)・Low leakage: 10 cm3/min or less・Space saving: Height 100 mm・Body material: Stainless steel 316L equivalent, Bronze (CAC)

• Material: Cast Iron
• Color: Black
• Application: Air
• Feature: Blow-Out-Proof, Durable
• End Connection Type: Threaded
• Surface Finish: Shot Blasted
• Size Range: 15 mm to 50 mm

• Country of Origin: India
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Temperature Pressure: High Temperature Pressure
• Valve Size: 1inch, 1/2inch, 1.1/2inch, 1.1/4inch, 2inch, 3/4inch
• Type: Industrial Valves
• Number Of Way: 2way
• Warranty: 2 Year
• Driving Mode: Manual

Y Type Globe Valve