Viraj Electricals Kathwada, Ahmedabad, Gujarat

The easier automatic operation of the pump is possible with the use of the float switch or automatic level control unit. The pump is available in oil, grease and water lubrication system.

The 'VIRAJ' type "VCP" Non-Clog Vertical Slurry Pump caters to the requirements of various industries such as Collieries, Mining, Sugar, Chemical, Fertilizer, Paper, Food, Steel, etc. The Vertical Slurry Pumps are also used in Sewage Treatment Plants for dealing with crude sewage and other liquids that contain solids or semisolids. The Vertical Slurry Pumps have maximum suspension length of 8 meters approx. It is measured from bottom of mounting plate to the centre line of the pump. By using the float switch or automatic level control unit, the Vertical Slurry Pumps work automatically. Our Vertical Slurry Pumps are available in grease, oil, and water lubrication system. Application : Steel Plant & Power PlantPharmaceuticals & Bulk DrugsRefineriesPaints & DyesEffluent treatment Chemical IndustiresPetrochemicalsSugar & MiningConstructionMunicipal corporation/Nagar PalikaDesalinationRaw Water HandlingFertilizer Plants

The'VIRAJ' type "VCP" Non-Clog Vertical Wet Pit Sump Pump has been designed to meet the demands in Mines, Collieries, Chemical, Sugar, Fertilizer, Food, Paper, Steel and industrial plants and also Sewage Treatment Plant to deal with crude sewage and other liquids containing solids or semisolids. The pump is constructed for long service with very little attention and is of strong built to withstand the satisfactory service. The pump is manufactured with maximum suspension length of 8 meters approx. It is measured from bottom of mounting plate to the centre line of the pump. The easier automatic operation of the pump is possible with the use of the float switch or automatic level control unit. The pump is available in oil, grease and water lubrication system.

The "VIRAJ" make "VSPM" series is designed in self priming Non-clog Horizontal pump of Mono Block and only pump construction. This series pumps available with semi open type impeller s per customer application. This pump future is quick self priming action, long life due to replaceable wearing parts and for priming no need foot valve and easy maintenance and spare available. Quick automatic self priming action. Automatic air release during priming. • Non-clogging impeller to handle suspended solids. • Suitable for motor & engine • Dynamically balance rotation parts ensure avoid minimum vibrations. • No need to foot valve • Portable when fitted with trolley. • Higher Efficiency

The "VIRAJ" make "VSPM" series is designed in Non-clog Horizontal Self Priming Mud Pumps of mono block and only pump construction. Self Priming Mud Pumps are also provided with semi-open type impeller to cater to the special requirements of the customers. Our Self Priming Mud Pumps have longer life because of the replaceable wearing parts. The Self Priming Mud Pumps offer quick self-priming actions and also no foot valve is required for priming. Furthermore, our Self Priming Mud Pumps need lesser maintenance and their spare parts are also easily available. Design Features : Quick automatic self priming action. Automatic air release during primingNon-clogging impeller to handle suspended solidsSuitable for motor & engineDynamically balance rotation parts ensure avoid minimum vibrationsNo need to foot valvePortable when fitted with trolleyHigher Efficiency Advantages of "MS/MV" : Available in both 2900 RPM & 1440 rpm ( 3.0 hp & 5.0 hp)Available with fully S.S. constructionZero Routine maintenanceEnables maintenance at siteTolerates wide electrical supply fluctuationsCompact and light weightRobust constructionShaft supported on two ball bearings Application Area : Construction Site Textiles , Ceramic and Chemical IndustriesPetroleum Industries Dewatering application for any industriesHotel / Airport/ Railways ETP Plant , Waste water applicationMarine IndustriesMunicipal Corporation/Nagar Palica sewage pumpingSteel IndustryPower PlantCoal /PortTunnelsTrenches and Pits Accessories : CouplingBase FrameFlangeMotorVirbating PadTrolly

The company is counted amidst the prominent Screw Pumps Manufacturers and Suppliers in India. These Screw Pumps are made as per the latest technology and industrial quality standards. Our Screw Pumps can be availed at the most competitive prices. Pumping Principle : Positive Displacement Progressive Cavity Screw Pump has unique pumping principle that employs a precisely manufactured metallic single helical rotor turning inside a double internal helical resilient stator. Thereby forming cavities confined by a “Sealing Line” which is maintained at stand still and during rotation. While the rotor rotates in the stator, the cavity formed between them progresses form suction to delivery side, gently carrying the medium. Material of Construction : Standard VSM series pumps are made of Cast Iron casting. All the rotating parts including the rotor are made of Ni-cr or Stainless Steel. For abrasive applications tool steel hardened and hard chrome plated rotor is used. Shaft sealing is ensured by soft gland packing or mechanical seal as desired. Stores are usually of natural or nitrile polymer, but to suit the mediums, EPDM, hypalon, silicon are also used. The Standard VBM series pumps have wettable pump housing and rotating parts of SS304/SS316. For special application of highly corrosive fluids Ebonite /FRP Lined housing parts are used, while rotating parts made of Haste-alloy, Alloy 20 or other Super Alloys. Both AM & BM pump series pumps are supplied with I.S.O. suction and delivery connection. Alternately pumps can also be supplied with B.S., DIN or special connections to suit the specific requirements. Characteristics : Good self priming properties even with air or gas inclusion in the liquid up to 8.5 MWCHandles solids in suspension or mixture containing high percentage of solids. Bigger size pumps up to 40 mm diameter Steady and smooth flow with little pulsation makes it suitable for dosing and metering dutiesDirection of the flow through the pump is reversible by merely changing direction of rotation of the prime mover The pressure head is independent of speed and capacity is proportional to speedGate and check valves are not necessaryThe metal bonded high precision molded stator ensures, high efficiency pressure and increased lifeIt is suitable for dosing and metering duties because of its sturdy and smooth flow with slight pulsation. Stator is metal bonded, guarantees high efficiency, pressure and improved life. Technical Details : Capacity : 150 Cu.M/Hr Head : up to 240 meters ( 24 kg/cm2 ) Temperature : Up to 200 Deg C Viscosity : Up to 5,00,000 CST Solids Handling Capacity : Up to 40 mm Application : Brewery CeramicsChemicalConstructionCosmeticDetergent Distillery Calcium Dyestuff SugerTextile EffluentEdible OilFertilizerMarinePharmaceuticalsPaperPaintSweage TreatmentSoap Application : Acids Acrylic Emulsion Alkaline Slurry AL Hydroxide Gel Carbonated Bewerage Chemical SlurryCeramic SlurryCoating Mix Domestic Effluent Detergent Slurry Sizing PasteTribasic LeadViscoseDyestuffEmulsion Explosive Slurry Instant Tea Floral ConcreteLatexLime Slurry Lube Oil Lubricating Oil MagmaSolventsSulphateYeast MolassesOil SlurryPaintPaintPaper ULP Printing Colour Precipiated CarbonateResinRice Bran Oil Soap SolutionSuger Juice Vegetable Oil

The “VIRAJ” make “MS/MV” series is designed in single stage, centrifugal by A.C. squirrel cage induction motor in a fully submersible Portable Drainage Pumps of close coupled vertical (mono-block type) construction. Our Portable Drainage Pumps are used for draining abrasive water from mines, construction sites, docks, basement dewatering, flooded areas, etc. The Portable Drainage Pump has outstanding performance and capacity, higher motor power and light weight. Design Features : These pumps are specially designed for Raw water , Rain Water , Treated ETP water with small particle size 6 mm to 35 mm. These pumps are offer with vortex type impeller( non -clog free flow type)/Channel /Close made in S.S 304 /316/C.I.. These pumps are design easy to maintenance at site These pumps are Light Weight and Compact Design compare to others These pumps are equipped with double mechanical seal & ball bearing These pumps are also available with built in thermal protection (Optional) & Moisture protection (Optional) These pumps motor are available in Dry Winding(Super Enameled) These pumps are available in single phase ( up to 2.0 hp ) & three phase . These pump are available with float switch ( single phase model). Advantages of "MS/MV" : Available in both 2900 RPM & 1440 rpm ( 3.0 hp & 5.0 hp) Available with fully S.S. construction. Zero Routine maintenance Enables maintenance at site Tolerates wide electrical supply fluctuations Compact and light weight Robust construction Shaft supported on two ball bearings Application Area : Water Supply Schemes Construction Sites Effluent Treatment Water Treatment Steel Industry Irrigation Dewatering of mines and pits Hotel, Garden ,Flooded clear water Harbours and tunnels , trehches Chemical Industry Flood water control

Power : 1Bhp, 2Bhp, 3Bhp

Application : Liquid Drainage

Certification : ISO 9001:2008

Type : Drain Pump

Weight : 20-40kg, 40-60kg

These are powerful submersible drainage pumps designed for draining abrasive water from construction sites, mines, docks, flooded areas, basement dewatering , hotel ,manhole, small pit, tranches etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. The pumps have an excellent performance capacity with high motor power combined with compact light weight design.

The “VIRAJ” make “EJ/MJ/VDX” series is designed in single stage, centrifugal by A.C. squirrel cage induction motor in a fully submersible Portable Dewatering Pumps of close coupled vertical (mono-block type) construction. Portable Dewatering Pumps can be transported and installed easily and cater to varying industrial applications. Portable Dewatering Pumps are used for draining abrasive water from mines, construction sites, docks, basement dewatering, flooded areas, etc. Having superb performance and capacity, the Portable Dewatering Pumps have higher motor power and are light in weight. Design Features : These pumps are specially designed for Raw water , Rain Water , Treated ETP water with small (EJ Series – UP TO 10 MM , MJ/VDX Series - particle size (up to 35 mm)These pumps are offer with semi open type impeller (non -clog free flow type) / Channel / Close made in S.S 304 /316/C.I..These pumps are design easy to maintenance at siteThese pumps are Light Weight and Compact Design compare to othersThese pumps are equipped with double mechanical seal & ball bearing.These pumps are also available with built in thermal protection (Optional) & Moisture protection (Optional)These pumps motor are available in Dry Winding (Super Enameled) & MJ/VDX Series also available in Wet Winding (P.V.C.Wdg. Wire) Advantages of "Viraj" EJ/MJ/VDX Series : Available in both 1450 and 2900 RPM (MJ & VDX Series Only) ( EJ Series available only in 2900 rpm )Robust constructionCan work under flooded or partially submerged conditionsMotors are oil filled and oil lubricated (only in P.V.C. wound motor & In Dry motor Optional)Compact and light weightImpellers dynamically balanced & Impellers are in open / semi open / non clog designMotor cooling ensured by the liquid being pumpedImpellers in hardened steel or CF8M or as per application requirement.Reduction of construction cost.Motor has an extra overload inbuilt capacityShaft supported on two ball bearings Application Area : Water Supply SchemesConstruction SitesEffluent TreatmentWater TreatmentSteel IndustryRiver waterDewatering of mines and pitsDesilting OperationsBuilding dams, harbours and tunnels Chemical IndustryFlood water control

These are powerful submersible dewatering pumps designed for draining abrasive water from construction sites, mines, docks, flooded areas, basement dewatering etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. These pumps are specially designed for Raw water , Rain Water , Treated ETP water with small ( EJ SERIES – UP TO 10 MM , MJVDX SERIES - particle size ( up to 35 mm)

The “VIRAJ” Pump make “VNCS” Series is designed in single stage Non Clog Sewage Submersible Pumps of close coupled vertical (mono-block type) construction. Our Non Clog Sewage Submersible Pumps offer simple, the most economical and reliable way of solving the pumping and disposal of sewage containing suspended solids, pumping of raw unscreened sewage and effluent, storm water, sand with water as well as raw and waste water containing large solid objects. These compactly designed Non Clog Sewage Submersible Pumps are easy to handle and can be permanently installed with the help of automatic coupling in a small sump form where sewage is to be pumped or can be use portable duty. Being submersible Non Clog Sewage Submersible Pumps do not require any other pump house. Design Features : "VIRAJ" Pump available with Single Vane/ Two Vane /Three Vane/Vortex/Channel for different application."VIRAJ" Pump motor squirrel cage high troque induction motor with class "F" insulation . Our motor are shrink fitted in the stator housing thus ensuring maximum heat dissipation with low temperature rise ,stator triple impreganated capable up to max. start/stop ."VIRAJ" pump motor equipped with inbuilt winding prevent over heating – thermistor protection and also moisture sensor for leakage in sealing of motor as well as mechnincal seals (Oil Changes).These pumps are equipped with couple mechnincal seal as well as double bal bearings. Advantages of "VNCS" : Heavy duty designFlood proof pumping stations - even in large scale floodsHigh pump efficiency is sustainable over longer periodsLower construction costZero Routine maintenanceNoiseless Pumping StationsEnables maintenance at siteNew scope of reduction of volume of wet wellLowest Life Cycle CostsReduction in operational manpowerTolerates wide electrical supply fluctuations Application Area : Steel Plant & Power PlantRefineries Effluent TreatmentPetrochemicalsConstructionDesalination Pharmaceuticals & Bulk DrugsPaints & DyesChemical IndustiresSugar & Mining Municipal corporation/Nagar Palika Raw Water Handling etc.

We are offering non clog sewage pump. the “viraj” pump make “vncs” series is designed in single stage non clog sewage submersible pumps of close coupled vertical (mono-block type) construction. Our non clog sewage submersible pumps offer simple, the most economical and reliable way of solving the pumping and disposal of sewage containing suspended solids, pumping of raw unscreened sewage and effluent, storm water, sand with water as well as raw and waste water containing large solid objects. These compactly designed non clog sewage submersible pumps are easy to handle and can be permanently installed with the help of automatic coupling in a small sump form where sewage is to be pumped or can be use portable duty. Being submersible non clog sewage submersible pumps do not require any other pump house.

Brand Name : VIRAJ

Non-clog Sewage pump of close coupled vertical ( mono-block type) construction. "VIRAJ" non clog submersible sewage pump offer simple the most economical and most reliable way of solving the pumping and disposal of sewage containing suspended solids, pumping of raw unscreened sewage and effluent, storm water , sand with water as well as raw and waste water containing large solid objects.. "VIRAJ"S rich experience over several year in the filed of designing and manufacturing of varieties of reliable and efficient pump which need practically no maintenance . These pump compactly designed pump are easy to handle and can be installed permanently with the help of automatic coupling in a small sump form where sewage is to be pumped or can be use portable duty .Being submersible they do not require any other pump house.

Mono Block and only pump construction. This series pumps available with semi open type impeller s per customer application. This pump future is quick self priming action, long life due to replaceable wearing parts and for priming no need foot valve and easy maintenance and spare available.

Viraj Electricals a popular name in the industry, trusted for its high quality Manhole Pumps. We are widely acknowledged as reliable Manufacturer & Supplier of Manhole Pumps. We introduce VNCS Series Manhole Pump that is specially for use in manhole id � 20� Dia. It is specially designed for manhole. This pump is used for sewer water, waste water with solid particle size up to 65 MM. With vortex & semi open impeller design. Note : Additionally, we provide Self Overflow Water Cooling Jacket. Due to the jacket, pump works at zero suction head. Specifications : HP � 3.0 HP TO 15.0 HPHEAD � UP T0 25 MTRDISCHARGE � UP TO 200 M3/HR

at present as we know manhole drain is bigger problem because manhole opening diameter is maximum 24" and in this size we have only two option for pumping  1. With small pump drain which size suitable with 24" with all fitted accessories for require drain . 2. Negative suction pump .now, in negative suction pump we face so many problem for priming and also this type of pump not handling solid size more than 20 mm.           in market if we fitted bend and hose submersible pump suitable maximum 5 hp or 10 with outlet 100 mm its maximum this also make some company. Not all.  normally easy to operate common size pump is 3 hp.that reason we are not doing properly drain our manhole in time. now, we give a batter solution inform of mahole pump  - we design manhole pump up to 30 hp with 300 m3/hr at 10 mtr. Head with outlet 150 mm.even if you want with 10 hp outlet 150 mm its also available in our manhole pump design.benefit of "viraj" manhole pump .11. Its easy to down in manhole ( 550mm dia min.) - with all accessories like hose  for lift waste water out side manhole .2. Available up to 30 hose power.3. Available 7.5 hp to 30 hp with 150 mm outlet also . So heavy discharge you drain from manhole.4. Solid handling size - up to 100 mm ( minimum - 65 mm)5. Complete non clog design.6. Easy to handle .7. Submersible type so no priming require.8. For dry run cooling jacket optional available.9. Above 15 hp inbuilt contactor for thermal protection against motor heat proteciton.

Type : Centrifugal Pumps

Certification : ISO 9001:2008 Certified

Application : manhole slurry

We are a prominent Horizontal Split Casing Pumps Manufacturer and Supplier in India. These Horizontal Split Casing Pumps are horizontal axially split casing, single stage, double suction or single suction, single volute or double volute type pumps with horizontal shaft. The Horizontal Split Casing Pumps can be availed from us at the most competitive prices. These are horizontal axially split casing, single stage, double suction or single suction, single volute or double volute type pumps with horizontal shaft. Special Features : Rotating assembly accessible for inspection or maintenance by removing upper half casing without disturbing suction and delivery piping and motorHorizontal execution ( standard ) or vertical execution ( optional)Vertical pump, direct drive or with universal shaft arrangementHigh hydraulic and overall efficiency due to superior design and manufacturing techniquesGood suction performance and low NPSHStable characteristics, minimum maintenance required, vibration free performanceHigh reliability Pump Casing : Horizontal axially spilt volute type, suction and discharge nozzles and supporting feet are cast integral with lower half casing. Impeller : Double or single suction type accurately balanced. In case of double suction impellers, the hydraulic thrust is balanced automatically because of pressure equalization on both sides of the impeller. Shafts : The high tensile steel shaft accurately machined and ground is supported by antifriction bearings. The shaft is protected by shaft sleeves from wear in stuffing box area. Stuffing Box : Can be sealed by gland packing or by mechanical seal and is suitable for liquids having temperature up to 90oC. Bearings : Grease Lubricated deep groove ball I roller bearings are provided. Large pumps can be provided with Oil Lubricated / Oil ring bearings. Direction Of Rotation : Standard : Anticlockwise ( ACW ) when viewed from driving endOptional : Clockwise ( CW ) when viewed from driving end Drive : Suitable for coupling with electric motors, engines or steam turbines either directly or through belt drives, gear boxes etc. Flanges : Standard : Drilled to BS : 10 Table D/E/F or BS-4504,Table PN16 plain face depending upon modelOptional : DIN / ASA with suitable pressure rating depending upon model

This pump future is quick self priming action, long life due to replaceable wearing parts and for priming no need foot valve and easy maintenance and spare available. Quick automatic self priming action. Automatic air release during priming.

Series is radial split Backpull out design process and clear water pump consisting of 35 model with six group of bearing housing for minimum inventory of spares. Standard design is foot mounted, In this design for the facility of maintenance to easily removed without disturbing the motor form the base frame & the pu

Standard design is foot mounted, In this design for the facility of maintenance to easily removed without disturbing the motor form the base frame & the pump casing fixed to the pipe line. Available in 960, 1450 & 2900 RPM Horizontal jacketed, centre line supported process pumps offered for handling high temperature liquids oils.

Pressure : UP TO 40 KG/CM2

The company is a prominent Centrifugal End Suction Pumps Manufacturer and Supplier in India. The "VIRAJ" make "VCCP" Series is radial split Backpull out design process and clear water pump consisting of 35 models with six group of bearing housing for minimum inventory of spares. The standard design of Centrifugal End Suction Pumps is foot mounted. In this design for the facility of maintenance to easily removed without disturbing the motor form the base frame & the pump casing fixed to the pipe line. Design Features : Available in 960, 1450 & 2900 RPMBack pullout design for ease of maintenanceHorizontal jacketed, centre line supported process pumps offered for handling high temperature liquids / oilsShaft sealing with gland packing single or double mechanical sealStandard and special materialsClosed or semi open impellerCustom engineering to meet customer requirements Maximum interchangeability of components is possible for a particular series, resulting in lower inventory of spares Application Area : AcidCooling TowerSteel plantChemical IndustryWater supplyBrineAlcoholFire SystemPaper /Plup millPower PlantProcess Industries Accessories : CouplingBase FrameFlangeMotorVirbating PadTrolly Material of Construction : C.I. as per is 210 ( with requre as per application grade)Cast Steel –ASTM 216 Grade WCB Bronze – IS 318 GR. LTB- IIStainless Stell – ASTM -743 , CF8MAlloy 20 – ASTM – 743 ,CN7MonelCD4MCU

These are powerful submersible dewatering pumps designed for draining abrasive water from construction sites, mines, docks, flooded areas, basement dewatering etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. The pumps have an excellent performance capacity with high motor power combined with compact light weight design

sewage pump offer simple the most economical and most reliable way of solving the pumping and disposal of sewage containing suspended solids, pumping of raw unscreened sewage and effluent, storm water , sand with water as well as raw and waste water containing large solid objects.. "VIRAJ"S rich experience over several year in the filed of designing and manufacturing of varieties of reliable and efficient pump which need practically no maintenance . These pump compactly designed pump are easy to handle and can be installed permanently with the help of automatic coupling in a small sump form where sewage is to be pumped or can be use portable duty .Being submersible they do not require any other pump house.