Back Back
Super Ajanta SBR Waterproofing Coatings
180 Per Litre
50 Litre (MOQ)
Application:Surface Preparation: The object of the surface preparation is to achieve a clean sound surface with a good mechanical key. All substrates should be cleaned and free of dust, plaster, oil, paint, grease, corrosion deposits, and any Other deleterious substances. Latence should be removed by mechanical means. Smooth substrates must be mechanically roughened e.g. by scabbing, needle gun or grit blasting to provide an adequate key. Corroded reinforcing steel should be exposed around its full circumference. Advantages:Simple to use - Single component, gauged as required.High adhesion-provides excellent bond to concrete, adhesion plaster, masonry. Stone work, etc.Improves durability - Gives weather resistant mortar with improved impermeability to chlorides and Other harmful agents.Reduces permeability-Provides waterproof screeds, plasters and permeability slurries.Increases strength - Improved tensile and flexural properties allow thin applications.Versatile-Compatible with all common hydraulic cements. Uses:For modifying and improving bonding Of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonary and slurries.
Waterproof Coating
Get Price Quote
A premium quality 100% Acrylic elastomeric coating specially formulated for waterproofing to form a seamless membrane, which is resistant to sunlight, heat, water and most chemicals, typically used as waterproofing and as a topcoat for roof coating to protect the UV rays for reducing heat at bottom. It provides superior protection to built-up and gravel roof systems, may also be used on galvanize steel, concrete and urethane foam roofing, it gives outstanding durability because of its UV protec Features Forms a flexible coating that protects against UV rays, Heat and pounded Water May also used on metal, wood, Concrete and Masonry Surfaces May also used on Galvanized Steel Surface Preparation Surface must be clean, dry and free from dust, grease, mildew and wax remove any loose and peeling parts and prime with America’s colour primer. If surface is glossy should be sanded to a dull finish If mildew is present the surface should be washed with chlorine bleach solution (20% household bleach and 1% liquid detergent in warm water) If Concrete is new then allow for 30 days prior to application The PH of Concrete should be less than 10, check by PH paper, if Surface is not within the 10 PH and large amount of efflorescence. (efflorescence is seen as a white salty deposit on the concrete surface) are present then the concrete should be acid etched prior to painting ( etching solution is 1 part of commercial HCL and 3 parts of water mix) and apply uniformly the wash with clean water and allow to fry the surface. The Concrete must be dry prior to coating (less than 12% moisture content) but f the surface is totally dry then spray little water on the concrete prior to painting will help the paint to penetrate into the concrete. Latex base sealer or Primer must be applied first to reduce the exposure to alkali conditions
0.0
View Profile
Best Deals from Water Resistant Coatings
Post Free Ad
