Wheel Aerator Dealers in Rajkot

Aquaculture activity is increasing day by day throughout the word. To develop Aquaculture, we require good soil, good water source & electricity. To overcome the issue of unavailability of electricity, we developed this long arm aerator which can work with diesel engine.For larger ponds, it is difficult to generate enough oxygen and water current with the help of regular Paddle Wheel Aerators. This 20 Feet Long Arm Paddle Wheel Aerator can generate enough oxygen as well as sufficient water current for larger ponds.Using components like Single Mould Impeller, HDPE Floats, S.S. Clamping etc. we can get accurate alignment for such 20 Feet Long Arm Paddle Wheel Aerator. Benefit of using these components is that we can have minimum power loss in this 20 Feet Long Arm Paddle Wheel Aerator compared to other Long Arm Aerators.

• Type: Surface Fixed, Surface Floating
• Brand Name: Aquasea
• Application: Pond Aeration
• Certification: ISO 9001:2008
• After-Sales Service Provided: Yes
• Guarantee: 1 Year Guarantee

Aquasea aerator is a high-efficiency electric motor with low power consumption and Bevel gear system for 2 HP Paddle Wheel Aerator. Its electric motor can work in both low as well as high voltage. 35mm x 35mm X 3mm'L' angle stainless steel powder coated frame holds the aerator firmly so that we can have great performance. All UV resistance plastic parts give a better life in sunlight. we serve quality product to Aquaculture Industries.   SPECIFICATIONS FOR 2HP PADDLE WHEEL AERATOR  Item No. Part Name Qty./ Set Short Specification 1 Motor 1 100% copper wire and silicon stamping Motor 2 Gear Box 1 Bevel - Helical Type Gear Box 3 Movable Joint 2 Stainless Steel - 304 with High-Quality Molded Rubber 4 HDPE Float 3 Virgin HDPE with UV 5 Impeller 4 Virgin PPCP with UV 6 HDPE Cover 1 Virgin HDPE with UV 7 Shafting 2 Stainless Steel - 304 Sleeve with inside Solid Iron Road 8 SS Frame 1 Stainless Steel - 304 L Angle 9 SS Bolt Kit 1 Stainless Steel - 304 10 Tripod 2 virgin Nylon with 4% UV 

  Paddle wheel aerator is well design for high efficiency in oxygen availability. Our paddle wheel aerator has lower power consumption 2HP motor, fan with 4 blade which can splash maximum water. The synthetic rubber bush is mounted to the end to minimum resistance against continuous frictions & float are made of high grade virgin plastic & withstand against any condition without suffering from any crack or leakage problem. Our paddle wheel are strictly inspected so that our customer have no problem while fitting.

2HP Prawn Pond Aerator is widely used in aquaculture shrimp or prawn ponds. It can increases dissolved oxygen in water and therefore speed up growth of aqua animals like shrimp, crab, fish and so on. All new materials made parts with high workmanship ensure our customers receive premium quality Aerators. 2HP Prawn Pond Aerator Consists of : Item No Material Motor 1 Cast iron, 100% copper wire with protector Reducer 1 Arcuate-bevel gear, ratio 1:14 Impeller 4 New PP, 101RPM Float 3 Virgin HDPE, resist acid-alkalinity and UV Motor Cover 1 Virgin HDPE, add additives to resist UV Frame 1 304# SS with no deformation Shaft 2 304# SS, chemical resistance Movable Joint 2 SS and rubber Bush Support 2 nylon and rubber Hot Sale Superior Quality 2HP Prawn Pond Aerator Characteristics: 1.High efficiency and saving over 20% electric energy than traditional models. 2.Mechanical seal is available to against oil leak pollution. 3.Built-in protector avoids motor being burnt accidentally. 4.The float is made of good engineering plastic HDPE with UV protection. It has great buoyancy and high strength. 5.The impeller is made of New PP. The spoke and vane is shaped with plastic only one time. 6.Power efficiency is over 1.25 kg(h·kW),much higher than the standard. 7.Oxygenation rate:2.6kgh. 8.Easy assembly and maintenance. 9.Stainless steel frame is sturdy with no deformation and high durability. 10.Can be used both on freshwater and seawater Additional Information: Minimum Order Quantity: 1 Piece

• Voltage: 415v ± 10v
• Rate Power: 2.25Kw
• Phase: 3PH
• Rated Frequency: 50Hz
• Aerator (rpm): 106 rpm

This aerator is specially designed for intensive & super intensive culture systems. We develop high efficiency electric motor with low power consumption and Bevel gear system for 3 HP Paddle Wheel Aerator. This electric motor can works in both low as well as high voltage. 35mm x 35mm 'L' angle stainless steel frame holds the aerator firmly so that we can have great performance. 6 impellers make it more powerful for the usability in larger area. All UV resistance plastic parts give better life in sunlight also. This way, We serve quality product to Aquaculture Industries.

• Voltage: 420v
• Application: Pond Aeration
• Brand Name: Aquasea
• Warranty: 1 year
• Float Weight: 6 kgs
• Frame Weight: 11 kgs
• Frequency: 50 hz
• Impeller Weight: 2 kgs
• Paddle Wheel Material: PP
• Paddle Wheel Weight: 2 kgs
• Rated Frequency: 50hz
• Motor: 1.5 kw
• Power Consumption: 1.4amp
• Oxygenate Capability: 2.6 kg/H
• Motor Power: 2 hp
• No. of Paddle: 4
• Motor Phase: 3

• Type: Wate Treatment & Reverse Osmosis Plants
• Application: Pond Aeration, Waste Water Treatment
• Material: Cast Iron
• Capacity: 24 m3/hr
• Model: UN/20
• Design Type: Standard
• Paddle Number: 4
• Brand: Unolex

HP PADDEL WHEEL AERATOR, 2HP SUBMERSIBLE AERATOR, Mud Lifting Machine

1hp Paddle Wheel Aerator

submersible aerator