Floor Hardener Dealers in Ranipet

Floor Hardener (Ultrafloor-SOF) is a ‘Ready-to-use, shake-on-floor Abrasion Resistant Floor hardener. Floor Hardener (Ultrafloor-SOF) is used for wearing surface for industrial floors. Floor Hardener (Ultrafloor-SOF) is recommended for factory floors and warehouse surfaces that require abrasion resistant floor. Features Wear resistance & high abrasion resistant floor surface.High impact resistanceIncreased surface densityIncreases to resistancePenetration by oil, grease, hydraulic fluids and many industrial chemicals Application Procedure Base concreting The base concrete should be sound and placed.The water: cement ratio should be kept to a minimum consistency by using ULTRAFLO- N to produce a fully compacted concrete without excess water coming to the surface. Care must be taken to level the surface throughout the trowelling operation. Application Floor Hardener (Ultrafloor-SOF) should be sprinkled in two equal stages evenly on the surface of the freshly laid concrete as soon as the surface water has evaporated.Immediately after sprinkling of ULTRAFLOOR-SOF trowelling should be carried out either by hand or power float, when the surface has sufficiently stiffened as second trowel ling should be given to close any pores and remove any undulation in the surface.This should be followed by a final hand trowelling to remove any disc marks.The floor must be thoroughly cured. Coverage Coverage varies on types of floors. Medium duty : 5 Kg/m2Heavy duty : 7 Kg/m2Extra Heavy duty : 9 Kg/m2 Packing : Available in 50 Kg HDPE Bags