AC Drive Control System Dealers in Roorkee

• Type: Electric
• Condition: New
• Brand Name: Shalabh
• Use: Heavy Domestic Loads
• Packaging: Can be packed as per client requirement

The expertise of our organization lies in designing LT Panels by using the latest technology tools and devices. The LT Panels are made of special grade CRCA sheet procured from reliable manufacturers like SAIL, TATA, BHUSHAN, etc. Our entire gamut of LT Panels comes in varied sizes and specifications. Besides, the LT Panels can also be fabricated as per the specifications stated by clients. We offer LT Panels at the most affordable prices. As a result, we have become a renowned name as LT Panels Manufacturer and Supplier in Roorkee, Uttarakhand. LT Panels Are Used In L. T. Distribution System for Industrial Loads Heavy Domestic Loads Inductive Loads LT Panels/Feeder Pillar Boxes Are Designed As Per Latest IS Specifications IS-8623 IEC-439 EN-60439 Fabrication L. T. Panels/Feeder Pillar Boxes are made of special grade CRCA sheet procured from reliable manufacturers like SAIL, TATA, BHUSHAN, etc. CRCA sheets used for panels are of 10, 14and 16SWG.For panel making, the sheet is first inspected and straightened if required. It is then sent for marking as per the specifications followed by cutting on auto power press in the fabrication section. The sheet is then sent for moulding and grinded.Panel doors are sent for pressing/punching to provide space for mounting required instruments inside the panels. Powder Coating Thermoplastics are used to provide longer life to enclosure and protection against all types. of weather conditions with provision of double door at rear of the panels. Fabricated L. T. Panels and Feeder Pillar Boxes are sent to the powder coating section where latest techniques using epoxy polyester resin based powder Siemens Grey RAL-7032 is used on phosphatising surface to ensure strong scratch resistant coating. Panels are phosphatised through seven tank process (hot treatment) to ensure required smooth coating of phosphate, scaled with chromatic layer to ensure strong powder adhesion to surface to make it rust retardant in all indoor and outdoor weather conditions. Degreasing and derusting are the fundamental requirements prior to plating, powder coating and all types of finishing processes. For degreasing, a non-caustic based Degreasing Compound-1600 Super is used which is a high performance formulation containing biodegradable emulsifiers and wetting agents. Degreasing 1600 Super contains agents which gives a good rinse and low foaming. The product is formulated with highly versatile ingredients so as to give no water mark on the job to be processed. The articles are dipped in degreasing compound solution for 10- 20 minutes at 55oC. The degreased articles are then thoroughly water rinsed for 1-2 minutes with hot water and then taken to the derusting solution. The articles are derusted in Rustodene-1000 solution which is acid based derusting and descaling solution but the articles should be free from grease, oil, etc. The degreased and water rinsed articles are dipped in Rustodene-1 000 solution for 10-20 minutes at room temperature. Articles then are thoroughly water rinsed for 1-2 minutes in running water. To get good results, activator bath at a concentration of 0.15% at room temperature is used and then taken to phosphatising solution. Bond-150 (Zinc Phosphate) is a chemical solution for producing a zinc conversion coating on steel and iron surfaces. Bond-150 baths can be operated under Neutraliser side. Operation of bath on Neutraliser side gives a smooth coating at 65-70oC. Smooth coating of zinc phosphate makes good base for powder coating and reduces its consumption and retains powder gloss. Micro crystals of phosphate coating increases powder coating shining life and prevent spread of rust even after the damage of coating film. The coating meets the Indian Standard Specification IS 3618-1966 class 'B' & 'C'. The articles to be processed in Bond-150 solution for phosphate coating are being ensured to be free from grease, oil, dirt, rust, scale, etc. The phosphatising process takes 10-15 minutes at 65-70oC followed by water rinsing under running water for 2-3 minutes. To have better results, articles are immersed in passivation solution of 0.15% at 60oC for 30 seconds which enhances the corrosion resistance and also helps in quick drying. The drying is done inside a hot air circulating oven or by means of a blast of compressed air. The articles are then sent for powder coating preferably within 36 hours of phosphatising. Panels are checked for denting and filling is done using epoxy putty.Grinding is required to make the surface smooth. Coating with Siemens Grey powder as stated above is done and then put in electric oven at 180oC. Panels made of 10 and16 SWG are kept for 30 minutes while panels made of 14 SWG for 20 minutes. After taking the panels from the oven, they are checked for hardness, scratches, etc. and sent for touching if required. Wiring From powder coating section, panels are moved to wiring section. Wiring is done with coloured flexible copper multi stranded wires 'SHALABH' ISI marked. All covers,door inter panel jointing are provided with neoprene gasket for perfect dust protection. Spacious arrangement is made for cable termination ensuring comfortable and easy maintenance. Panels are excellent sleek and aesthetic. Bus-Bar Construction Copper/Aluminium Bus-bar of EC 91E electrolyte grade is provided and cross-sectional area is chosen on the basis of bus bar calculation considering derating factors : Bus-barsare braced rigidly to withstand short circuit fault with SM supports and proper bracing housed in electroplated" U"shaped channel All bus-bars are insulated with Poly Vinyl Chloride (PVC) heat shrinkable sleeves of relevant color and joints and insulated with specially developed optional "FRP SHROUD",thus ensuring total insulation of power Earth bus-bar size is determined with earth fault calculation and run throughout the panel and connected with every door /clamp of metallic switchgear body

• Cool White: 7>1

Led panels set up available in 250w,500w,1kw,2kw,3kw up to 10kw for residential and commercial purposes. 25years warranty on pv panels.

• Thickness: 20-30mm, 30-40mm, 40-50mm
• Color: Customer According
• Feature: Easy To Install, Fine Finishing, Premium Quality
• Finishing: Laminated
• Width: 20-40inch
• Frame Material: Metal, Steel
• Height: 10feet, 12feet
• Country of Origin: India
• Brand Name: Bhushan

We are reckoned as a prime LT Panel Manufacturer, Exporter and Supplier in the overseas market. The LT Panels provided by us are manufactured using superior grade raw materials. These LT Panels are used as main low-tension switchboards in power distribution applications. Our LT Panels are specially designed to offer complete flexibility and proper adoption of project requirement. Attributes High efficiencyReliable performanceRugged constructionEasy to installSafe operationsWithstands short circuits Demanded By Power stationsIndustrial plantsProcess industryHeavy power plants

We are well-known for offering advanced Digital Panel Meter to the clients. The clients get the option in terms of Digital Panel Meter with LCD display or LED display. Our Digital Panel Meter is microcontroller based and is appreciated for its high accuracy and read rate. The best feature of our Digital Panel Meter is that the signal can be automatically captured and can be easily displayed by keyboard commands. Features 4.5 digit LED+/- 20000 counts5V DC operatedProgrammable UnitsTare FunctionRS232 outputProgrammable Decimal pointProgrammable UnitsReal time clockFour button key padUsed as a direct-reading DC voltmeterProgrammable calibration factorOther controls on connector include meter hold, meter resetMeasurement accuracy is +/- 0.1% of full scale ±1 countProvides a full-scale readout of ±20,000 counts

We are reckoned as a prime LT Panel Manufacturer, Exporter and Supplier in the overseas market. The LT Panels provided by us are manufactured using superior grade raw materials. These LT Panels are used as main low-tension switchboards in power distribution applications.

OT Control Panel, which are used for the production of our finished goods, are cross examined over diverse aspects in order to ensure its excellent quality. The checking is done by our experts. Safety of the products is the prime concern of the organization. Thus, we store the entire lot in a capacious and well-structured warehouse till the delivery of the orders.

We are a prominent Supplier of all types of Electrical Control Panels. We bring forth wide variety of Electrical Control Panels that is known for high quality. Electrical Control Panels, available with us, are accurately dimensioned and durable. The Electrical Control Panels are appreciated for their hassle-free functioning. Avail Electrical Control Panels from us at very reasonable prices. Range MCCPCCDG Synchronize PanelPLC & Drives PanelAPFC Panel & Fabricated Enclosures

• Brand Name: Power Corp
• Model Number: P280
• Place of Origin: India

We offer solar panels from 3w to 280w .

Glow Sign Board, Flex Banner Printing, road sign, Banner Printing Service

Electrical Control Panels, Electrical Products

Compact Fluorescent Lamps, Electronic Luminaires, Electronic Ballasts

core, Electric Motor, Ceiling Fan, Transformer, Electrical Repairing Service

Power Transformers, Distribution Transformers, Electrical Lamination

Electrical Panels, Cable Trays, Oil Cool Tanks, steel Products

Access Control System, CCTV Camera, GPS System

Electrical Panel

Control Panels, Bulb, Electrical Transformers, Electronic Products

SOLAR PANELS, Solar EPC Service, dust bins containers

Process Control Instruments, quality control equipments

Distribution Transformers