Laboratory Apparatus Dealers in Roorkee

We are a nonpareil Manufacturer and Supplier of Reynold Apparatus. The Reynold Apparatus offered by us is used to visualize different flow conditions i.e. laminar flow, transition flow, turbulent flow, etc. Our Apparatus is also used to find out the Reynolds number. The complete range of the Apparatus is reasonably priced by us.   Details : The apparatus is used to visualize different flow conditions i.e. Laminar flow, transition flow, turbulent flow, To find out the reynolds number the apparatus consists of : A centrifugal pump of 25mm x 25mm with 14 hp motor (isi make) M.S sump tank 80 ltr. To collect the water. M.S measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time. G.I pipe of internal dia 25.4mm (1") and g.m. Isi mark control value and regulating valves are used to circulate water. Bye-Pass line is also used to regulate the discharge. This apparatus consists of a perspex tube of internal dia 25mm dia x 100cm long. A needle and color dye injector tank is used to visualize the flow. The tanks are well epoxy painted insided to prevent rust hence increase the life of tank.   Experimental capability : To visualize different flow conditions. To obtain the critical velocity

• Brand Name: Quality Engineering Corporation
• Power: Electronic
• Condition: New, Good
• Place of Origin: Roorkee
• Features: Quality, Reliability and Efficiency

We have in our store Laboratory Vane Shear Apparatus for determining the shear strength of both remolded and undisturbed soils. Designed with utmost precision, our Laboratory Vane Shear Apparatus consists of a torque head adjustable in height to enable the vane to be lowered into the specimen. The apparatus comes with a container. Our Laboratory Vane Shear Apparatus is widely acclaimed for its quality, reliability and efficiency. We provide Laboratory Vane Shear Apparatus with a set of springs, each one of approx. 2 kg. cm., 4kg cm, 6 kg cm and 8 kg cm.

• Top diameter: 70 mm
• Material: Brass
• Table Top Diameter: 2.5 mm
• Application / Industry: Cement concrete testing equipment
• Condition: New
• Base Diameter: 100 mm

Manual Flow Table  Apparatus is used for determining the workability of building limes.

• Power Requirement: 220V (+-) 10%, 50Hz
• Application: Laboratory Experiment 
• Color: Grey
• Model Number: PC-101
• Condition: New
• Brand Name: SES
• Display: 3 1/2 digit 7-segment LED

Conversant with the latest technology, We feel pride in introducing ourselves as a renowned Manufacturer and Supplier of Educational Apparatus For Heat and Mass Transfer Lab. We manufacture Educational Apparatus For Heat and Mass Transfer Lab under highly controlled industrial environment. Our precision engineering techniques have enabled us in the fabrication of one of the best Educational Apparatus For Heat and Mass Transfer Lab in the country. We can provide the diffrent kind of Educational Apparatus For Heat and Mass Transfer Lab with their models:- HMT01 : Composite Wall ApparatusHMT02 : Critical Heat Flux Apparatus HMT03 : Critical Radius of Insulating MaterialHMT04 : Emissivity Measurement ApparatusHMT05 : Finned Tube Heat Exchanger HMT06 : Forced Convection ApparatusHMT07 : Heat Pipe Demonstration ApparatusHMT08 : Heat Transfer Through Composite CylinderHMT09 : Heat Transfer Through Lagged Pipe HMT10 : Natural/Free Convection ApparatusHMT11 : Parallel Flow/Counter Current Flow in a Double Pipe Heat Exchanger Apparatus HMT12 : Pin Fin in Natural and Forced Convection ApparatusHMT13 : Shell and Tube Heat Exchanger HMT14 : Stefan Boltzmann ApparatusHMT15 : Thermal Conductivity of Insulating PowderHMT16 : Thermal Conductivity of LiquidHMT17 : Thermal Conductivity of Metal RodHMT18 : Thermal Conductivity of Slab by Guarded Hot Plate MethodHMT19 : Two Phase Heat Transfer Apparatus

This unit consists of a hermetically sealed compressor with air cooled condenser. A capillary or expansion valves are next to condensers following by medium temperature evaporators. Electrical energy supplied to compressor can be measured by energy meter. This apparatus is used to perform following experiments: • To determine COP of unit. • To draw P-H Chart. • To draw T-S Chart. Specifications: • Compressor : 0.25 ton • Air cooled condenser : Suitable for above compressor with suitable cooling fan. • Expansion device : Expansion Valve. • Evaporator coil : Suitable for above compressor immersed In water tank. • Refrigerant : Freon-134R • Energy meter : For power measurement of compressor • Pressure gauges : 2 Nos. for high pressure for low pressure. • Service valve : 1 No. Needle type • Ammeter : 1 No. • Voltmeter : 1 No. • Thermostat : 1 No. • Filter/Drier : 1 No. • Digital Temperature Indicator 4 channel. • Temperature sensor (Thermocouple) : 4 Nos. • The equipment is mounted on a sturdy frame with control panel.

• Item Code: NIC-41
• Usage/Application: Industrial
• Brand: National Instruments
• Material: Iron
• Accuracy: +-5%

The experimental set up consists of a horizontal perspex duct of smooth variable cross-section of convergent and divergent type. The section is 40mm x 400mm at the entrance and exit and 40mm x 20mm at the middle. The total length of duct is 90cm. The piezometric pressure p at the locations of pressure tappings is measured by means of 11 piezometer tubes installed at an equal distance of 7.5 cm. Along the length of conduit. The duct is connected with supply tanks at its entrance and exit end with means of varying the flow rate. A collecting tanks 40x40x30cm. Height is used to find the actual discharge

• Finishing: Powder Coated
• Speciality: Easy To Use, High Efficiency, Reliable
• Type: Slump Cone Apparatus
• Color: Blue
• Condition: New
• Country of Origin: India

• Brand Name: SASA
• Material: Steel
• Color: Black, Blue, Creay, Grey, Off-white, Smoke-grey, White, Z-black
• Condition: New
• Application: Laboratory, SOIL SURVEY
• Certification: GST,MSME,IEC
• Voltage: NONE
• Type: Soil Testing Equipment
• Warranty: 1year,2years
• Country of Origin: India,India
• Feature: Easy To Use, Fast Working, Light Weight, Speedy
• Name: SLUMP TEST APPARATUS

• Size: Standard
• Shape: Round
• Certification: ISI Certified
• Application: Laboratory, Mining
• Color: Brown
• Finishing: Polished

• Type: California Bearing Ratio Apparatus

• Driven Type: Electric
• Color: Grey, Light White
• Condition: New
• Power: 1-3kw
• Application: Medical Use
• Voltage: 220V
• Type: Medical Equipment
• Warranty: 1yrs
• Country of Origin: India
• Lighting Source: High Bright LED

We offer Plat Load Testing Apparatus, which is extremely acknowledged for its low maintenance, durability and dependability. Dimensional accuracy, sturdy construction and easy operation are some of the salient attributes that make our Plat Load Testing Apparatus highly popular among buyers. We manufacture Plat Load Testing Apparatus using premium raw material that ensures its durability. We are one of the prominent Manufacturers, Exporters and Suppliers of Plat Load Testing Apparatus from Uttarakhand, India.

We are chiefly engaged in manufacturing, exporting and supplying Thermal Conductivity Apparatus of the best quality. Our Thermal Conductivity Apparatus is specially designed and developed to measure and display the thermal conductivity of insulating materials. This apparatus uses guarded hot plate method as per guidelines of latest Indian Standards IS-3346 & broadly confirms to British standard ASTM177 as well. This Thermal Conductivity Apparatus is automatic, programmable and designed with latest integrated circuit technology. Further adding, our Thermal Conductivity Apparatus displays the �K� value directly in engineering units without much of expertise and adjustments. Made available in different specifications, our Thermal Conductivity Apparatus is very affordable. Comprises Of Data logger cum differential temperature controllerHigh performance D.C. power suppliesAuxiliary cold plate temperature controllerCold plateGuarded hot plate chamberWindow based software to collect all data and compute K-Value

• Material: MS Steel
• Brand Name: Sapphire
• Country of Origin: Made in India
• Usage/Application: Determination of the consistency of freshly mixed concrete
• Size: 20x10x30 cm