Plate Load Test Equipment Dealers in Roorkee

• Brand Name: Quality Engineering Corporation
• Place of Origin: Roorkee
• Features: Good Quality, Exceptional durability & Easy to use
• Head Size: 3
• Extensional Rod Size: 1 meter with end couplings

We manufacture and supply the best quality Sampling Augers. Our experienced professionals design Sampling Augers in a wide assortment of different sizes using quality material and ultra-modern technology. They are very easy to use owing to their lightweight. Also, these augers are acclaimed for optimum quality and exceptional durability. Further, Sampling Augers are reasonably priced. Sampling Auger outfit. Post-holed auger : Complete with 1 meter rod, tee piece, and handle head size 3", 4" and 6"dia. Sampling Augers outfit-screw type auger : Complete with 1 meter rod, tee piece, and handle head size 2", 3" dia. Extension rod 1 meter with end couplings

We are a nonpareil Manufacturer and Supplier of Reynold Apparatus. The Reynold Apparatus offered by us is used to visualize different flow conditions i.e. laminar flow, transition flow, turbulent flow, etc. Our Apparatus is also used to find out the Reynolds number. The complete range of the Apparatus is reasonably priced by us.   Details : The apparatus is used to visualize different flow conditions i.e. Laminar flow, transition flow, turbulent flow, To find out the reynolds number the apparatus consists of : A centrifugal pump of 25mm x 25mm with 14 hp motor (isi make) M.S sump tank 80 ltr. To collect the water. M.S measuring tank 40 ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in m.s. Measuring tank for certain time. G.I pipe of internal dia 25.4mm (1") and g.m. Isi mark control value and regulating valves are used to circulate water. Bye-Pass line is also used to regulate the discharge. This apparatus consists of a perspex tube of internal dia 25mm dia x 100cm long. A needle and color dye injector tank is used to visualize the flow. The tanks are well epoxy painted insided to prevent rust hence increase the life of tank.   Experimental capability : To visualize different flow conditions. To obtain the critical velocity

• Item Code: NIC-41
• Usage/Application: Industrial
• Brand: National Instruments
• Material: Iron
• Accuracy: +-5%

There are several methods to measure how much light is intercepted by a canopy in order to determine if water loss is from evaporation or transpiration. There’s the hard & expensive way and then there’s the smart way: the CTR-1. “Virtual” make Ceptometer offers convenient and flexible tools for measuring and analyzing incident and transmitted Photo synthetically Active Radiation (PAR) in Crop and Forest canopies. This is a a non-destructive method to easily and accurately measure Leaf Area Index (LAI). It provides vital information about the penetration of PAR into crops and forest, and is essential in work such as comparative crop studies, for separating out the effects of cultivars and treatment. It is particularly well suited to low regular canopies (as found in many agricultural crops). It can be used in most light conditions. The first sensor probe has an array of 10 PAR sensors embedded in a 1m long probe, and is connected with Handheld Terminal. The second sensor probe also has a 1 PAR sensor embedded in a 0.5m long probe, and is connected with handheld Data logger. One PAR Sensor is also connected with data logger for reference incoming radiation. When a reading is taken, all sensors are scanned and the measurements transmitted to the data logger. The average light level along the probe is calculated. Further you can download data from data logger to a computer (USB Port) with the help of "Virtualware" (PC Interface Software).

• Type: Fabricated
• Material: Metal
• Color: Red
• Size: Standard
• Pattern: Plain
• Surface: Polished

• Size: 30*45*30
• Type: Automatic
• Brand Name: Vision
• Material: Iron, SS
• Diameter: 30*45*30
• Weight: 30 kg
• Color: Blue

Vision International Company” is Supplier, Exporter and Importer,Trader, Retailer,Wholesaler Hydrological (All types of water current meter), Meteorological, Geological, Soil, Cement and concrete, Testing Equipments, Survey and Drawing, Scientific Instruments etc. We offer these products at reasonable rates and deliver these within the promised time-frame.Under the valuable guidance of our mentor Miss Raufa Ali, we are growing with a notable rate in the market. He has spent long years in the industry to have rich industrial experience enabling us to understand the varied requirements of our clients. We are the leading Exporter and Supplier of the above mentioned instruments. We have supplied these instruments to various government of semi government dep. technical institution and public sector also, which are functioning properly in their department without any complain. We successfully cater to the needs of our clients with international standard products at an economical price. Our experience in handling bulk orders and meeting targets as per the given schedules help us in efficiently meeting customer's needs.We provide cost effective service repair to any brand, any make instruments with service warranty.

We offer Sand Pouring Cylinder. Sand Pouring Cylinder (Small) The apparatus is suitable for field density estimation of fine and medium grained soils, as per IS: 2720 (Part XXVIII). It consists of: i) Sand Pouring Cylinder 115 mm internal dia with conical funnel and shutter. Ii) Calibrating Container,100mminner dia and 150 mm deep with flange 50 mm wide. Iii) Metal tray 300mm square x 40mm deep with a 100mm dia hole at the centre. (Large) The apparatus is suitable for estimation of field density of fine, medium and coarsegrained soils, as per IS : 2720 (part XXVIII). It consists of :- i) Sand Pouring Cylinder, 215 mm internal dia, with conical funnel and shutter. Ii) Calibrating container 200 mm inner dia x 250 mm high with 75 mm wide flange. Iii) Metal tray 450mmsquare x 50mmdeep with a 200 mm dia hole at the centre

• Type: California Bearing Ratio Apparatus

• Type: Soil Testing Equipment
• Certification: GST
• Application: SOIL FILTRATION TESTING
• Weight: 10-50kg
• Color: DARK BLUE
• Voltage: NONE
• Power: NONE
• Driven Type: Mechanical
• Warranty: 1year
• Country of Origin: India
• Brand Name: SASA
• Frame Material: M.S
• Color: DARK BLUE
• Usage: The rings are partially inserted into the soil and filled with water, after which the speed of infiltration is measured.
• Name: SASA DOUBLE RING SOIL INFILTROMETER

We offer Plat Load Testing Apparatus, which is extremely acknowledged for its low maintenance, durability and dependability. Dimensional accuracy, sturdy construction and easy operation are some of the salient attributes that make our Plat Load Testing Apparatus highly popular among buyers. We manufacture Plat Load Testing Apparatus using premium raw material that ensures its durability. We are one of the prominent Manufacturers, Exporters and Suppliers of Plat Load Testing Apparatus from Uttarakhand, India.

Sampling Augers is in two sort and each in various sizes.Each twist drill equip comprises one each of Auger head, one meter long pole, Tee piece and hangle.

• Features: Easy to use, Accurate results, Flawlessness

Specification:-Enables the determination of liquid limit to be performed simply and quickly.

Unconfined Compression Test Apparatus many a time it is essential to know unconfined compressive strength of soils saturated or nearly saturated.These results give an idea of the bearing capacities. Unconfined samples are unidirectional loaded gradually till failure in the test.

• Material: MS Steel
• Brand Name: Sapphire
• Country of Origin: Made in India
• Usage/Application: Determination of the consistency of freshly mixed concrete
• Size: 20x10x30 cm

the three hinged arch apparatus manufactured, exported, imported and supplied by our company, consists of a curved beam mounted on two fixed supports and usually featuring the so-called crown hinge at its crown. The hinges on the two fixed supports absorb vertical and horizontal forces, and are known as abutment hinges. Their connecting line is the springing line. The crown hinge renders the system statically determinate.

• Height: 30cm
• Internal Dimensions: 20 cm
• Steel Rod Dia: 16mm
• Steel Rod Length: 600mm

For determining the penetration time of oil and other liquids through paper and other similar materials. Provided with cooling system, Electronic PID control for constant temperature regulation and Electronic Self Starting Timer in built.

We are prominently engaged in providing Marshall Test Apparatus to the customers. This Marshall Test Apparatus method covers the measurement of the resistance to plastic flow of cylindrical specimens of Bituminous paying mixtures loaded on the lateral surface by means of the Marshall Apparatus. This Marshall Test Apparatus method is for used with hot mixtures containing asphalt or far and aggregate up to 25mm maximum size. Apparatus : Specimen Mould Assembly : Mould cylinders 4" (100mm) in diameter by 3 (76mm) in height, base plates, and extension collars shall confirm to the code. Three mould cylinders are recommendedSpecimen Extractor : A specimen extractor to remove the compacted specimen from the specimen moulds recommended. A suitable bar is required to transfer load from the extension collar through a circular steel plate (100mm dia x 12mm thick) supporting a steel rod of 25mm)Compaction Hammer : The compaction hammer shall have a flat, circular tamping face and a 103 B (4.5 kgs) sliding weight with a free fall of 18 inch, two compaction hammers are recommendedCompaction Pedestal : The compaction pedestal shall consists of a 8" x 8" wooden post capped with a 12" x 12" x 1" steel plate. The wooden post shall be oak, yellow pine or other wood having a dry weight of 42 to 48 LBS per cuft. The wooden post shall be secured by four angle iron brackets to a solid concrete slab. The steel cap shall be installed properly so that the post is plumb/straight and cap is levelSpecimen Holder : The specimen holder shall consists of a semi circular base and a circular ring to hold the specimen mould in place during compaction of the specimen, the top section shall be flanged to fit over the collar of the specimen mould and shall be provided in the base for mounting on the compaction pedestal. The specimen mould holder shall be mounted on the pedestal steel cap so that the center of the mould is over the postBreaking Head : The breaking head assembly shall consist of upper and lower cylindrical segment or test heads having an inside radius or curvature of 2" accurately machines. The lower segment shall be mounted on a base having two perpendicular guide rods or posts extending upward. Guide sleeves in the upper segment shall be in such a position as to direct the two segments together without appreciable binding or loss of motion on the guide rodsLoading Frame : The loading frame consists of a power operated screw jack mounted in a steel testing frame and shall produce a uniform vertical movement of 2" per minute the upward and downward movements are automatically controlled by Micro Switches. The testing (load) frame is also provided with a hand wheel (crank) for initialing adjustment or for applying loads in case of power failuresProving Ring Assembly : Own Proving Ring of 3000 kg capacity and sensitivity of 10 - 15 between and 2000 kg shall be equipped with micrometer dial. The micrometer shall be graduated in mms (0.002mm) Proving Ring attachments are required for fastening the Proving Ring to the testing frame and transmitting the load to the breaking head, suitable threads are provided in either side of the loading bosses of the Proving Ring for required fixing Miscellaneous Equipments : Oven or Hot Plate : Oven or Hot Bath should be provided for heating aggregate bituminous material specimen moulds, compaction base etc, and other equipments required or mixing and moulding temperatures. It should recommended that the required temperature with 5F controlled so as to maintain the required temperature within 51 (2.8C) suitable shields, baffle plates or sand baths shall be used on the surfaces of the hot plates so minimize localized over-heating or exposure to cool air in winterMixing Apparatus : Mechanical mixing is recommended. Any type of mechanical mixer may be used provided it can be maintained at the required mixing temperature and will produce a well coated, homogeneous mixture of the required amount in the allow-able time. A metal pan or bowl of sufficient capacity and hand mixing may also be used. Generally, specimen is prepared from the mixer of the hot plant or hot mix laid at siteWater Bath : The Water Bath shall be at least 15cm deep and shall be thermostatically controlled so as to maintain the bath at 140-188F (60oC) the tank shall have a perforated bottom or be equipped with a shelf for supporting specimen 5cm above the bottom of the bathContainers for heating bituminous material, either grill type tins, breakers pouring posts, or saucepans may be usedMixing tool-either steel trowel (Garden type) or spatula, for spreading and hand mixingThermometers of determining temperature of aggregates, bitumen and bituminous mixture. Armored glass thermometers or dial type with Metal stem are recommended. A range of 9.9 to 400/500 F (2 to 24oC) with sensitivity of 5F (2.8C) requiredThermometers for Water Bath with a range of 6F to 158F (20 to 70C) sensitive to 0.4F i.e. 0.2oCBalance 5 kg capacity, sensitive to 0.1gm for weighing molded specimensBalance 5 kg capacity, sensitive to 0.1gm for batching mixturesRubber gloves for removing specimens from water bathMarketing pencils for identifying specimensScoop flat bottom for batching aggregatesSpoon (large) for placing mixtures in specimen moulds Test Specimen : Number If Specimen : Prepare at least three specimens for each combination of aggregates and bitumen contentsPreparation Of Aggregates : Dry aggregates to constant weight at 221 to 231 F (105 to 110 C) and prepare the aggregates by dry sieving into the desired size fractions. The following size fractions are recommended 25mm- 20mm, 20mm to 12.5mm, 12.5mm to 4.75mm and passing 2.36mmDetermination Of Mixing : At compacting temperatures. The temperatures to which the asphalt must be heated to produce viscosity's of 85 to 10 sec saybolt favol and 140-15 sec saybolt farol shall be established as the mixing temperature and compaction temperature, respectively the corresponding viscosity's Farol shall be Englar specific viscosities of 25-3 for mixing and 40-5 for compactingPreparation Of Mixtures : Weight into separate pans for each test specimen, the amount to each size fraction required to produce a batch that will result in compact specimen 2.5"-3" in height (about 1200 G) place the pans on the hot plate or in the oven and that to a temperature of approximately 50 (27.8C) above the mixing bowl and with the heated aggregate and dry thoroughly, from a created in the dry blended aggregate and weight the required amount of a bituminous material into the mixture. At this point the temperature of the aggregate and bituminous material shall be within the limits of the mixing temperature established in paragraph below mix the aggregate and bituminous material rapidly until completely coatedCompaction Of Specimen : Thoroughly clean the specimen moiled assembly and the fact of the hot plate to temperature between 200 and 300 F (93.3 and 148.9C) place a piece of filter paper or paper toweling cut to size in the bottom of the mould before the mixtures is introduced. Place the entire batch in the mould space the mixture vigorously with a heated spatula or trowel to a slightly rounded shape. Temperature of the mixture immediately prior to a compaction shall be within the limits of the compacting temperature established a underPlace the collar and mould assembly on the compaction pedestal in the mould hold and unless otherwise specified, supply 50 blows with a compaction hammer with a free fall of 18 inch. Hold the axis of the compaction hammer perpendicular to the base of the mould assembly during compaction. Remove the base plate and collar and reverse the assembly of the mould. Apply the same number of compaction blows to the face of the reversed specimen. After compaction place the sample extractor plate on the end of the specimen. Place assembly with the extension collar down in the testing machine. Apply pressure by the load transfer bar and force the specimen into the extension collar. Lift the collar from the end of the specimen. Carefully transfer the specimen to smooth flat surface and allow it to stand overnight at room temperature. Weight measure and test the specimen. Table fans may be used. Mixtures that lack sufficient cohesion to result in the required cylindrical shape on removal from the mould immediately after compaction may be cooled, until rapidly cohesion has developed to result in the proper cylinder shape Procdure : Bring the specimens to the desired temperature by immersing them in Water Bath and place the lower segment of the Breaking Head and place the complete assembly in position on the testing machine. Place the dial gauge in position over the support and adjust the gauge at zero while holding in firmly against the upper segmentApply load to the specimen by means of the constant rate of movement of the load jack or testing machine head at 2 in per minute head of 2 inch indicated by the dial. Record the maximum reached load decreased as indicated by the dial. Record the maximum load sautéed on the testing machine or converted from the indicated flow. Recovery of test specimen from the Water Bath to the maximum load determination shall not exceed 30 secondsKeep the test sample in the Water Bath for 30 to 40 minutes, keep the samples in temperature at 140-188F for asphalt specimens and 100 to 118 F (37.8C) for tar specimen as in alternative the specimens may be brought to desired temperature by placing in an oven for minimum of 2 hours. Maintain the oven temperature at 140-188 F (60-70C) for asphalt specimen 100-108F (37.81C) for tar specimen. Thoroughly clean the guide rods and the inside surfaces for the test heads, proper to making the test and laborite the guide rods so that the upper test head slides freely over them. Remove the specimen from the water (for repeat test) and place in the breaking need assembly. Three samples (specimens) to be tested for each varying type mixtures Report (Result) : The report shall include the following information for each specimen tested : Weights of the test specimen. Average of three (3) to be takenMaximum load in kgs corrected when requiredFlow value in hundredth of a millimeterMixing temperatureCompacting temperature and testing temperature

• Usage/Application: Industry
• Country of Origin: Made in India
• Material: Mild Steel
• Automation Grade: Automatic
• Color: Blue

The double ring Infiltrometer is a simple instrument which is used to determine the infiltration rate of water into the soil. The infiltration rate is determinate as the amount of water per surface area and time unit, which penetrates the soils. This rate can be calculated on the basis of the measurements and the DARCY's law. Several measurements can be executed simultaneously, yielding a very reliable and accurate mean result. As vertically infiltrated water runs away to the side. The outer ring of the Infiltrometer serves as a separation. The measurement exclusively takes place in the inner ring through which the water runs virtually vertically. The instrument consists of two rings, driving plate, for inner and outer rings. The two rings are driven into the ground and partially filled with water. The double ring design helps prevent divergent flow in layered soils. The outer ring acts as a barrier to encourage only vertical flow from the inner ring. The standard set of the double ring Infiltrometer consist of 2 steel rings with different diameters, a hammer, floats, a stainless steel hammering cross and a stopwatch.

we are offering reynolds apparatus in fluid mechanics laboratory equipments for the used in engineering colleges and institutes...

We are a prominent Cone Penetrometer Manufacturer and Supplier in Roorkee. The Cone Penetrometer, we bring forth, is an automatic machine which enables the determination of liquid limit to the performed simply and quickly. The Cone Penetrometer, which we provide, is used in Soil Testing Departments for different purposes. The Cone Penetrometer provided by us is made in compliance with the industrial quality standards. About Cone Penetrometer : The unit is supplied complete with a stainless steel penetration test cone 35mm long with a smooth polished surface and an angle of 30 degree operation 20 volts, single phase A.C. SupplyUsed for determination Liquid limit of soil as I.S. 2720 Part V supplied complete with one penetration cup 50 mm internal dia X 50 mm high

Soil Testing Equipment, geographical instrument, scientific instrument

Soil Testing Equipment, tribatch, antique imitation crafts, civil engineers

Soil Testing Equipment, laboratory research instruments, Concrete, Cement