Pressure Transmitter Dealers

• Type: Differential Pressure Transmitters
• Material: Plastic
• Certification: YAS
• Weight: 100-150g
• Color: BLACK
• Application: Filter Monitoring
• Feature: High Performance
• Temperature: +20...+122°F / -6.7...+50 °C
• Brand Name: DWYER USA
• Accuracy: 616KD-A:±0.25% FS; 616KD-B: ±1% FS, 616KD: ±2% FS.
• Output: 0-10/0-5 V

• Temperature: -20 – 120°C
• Power Supply: 24 VDC
• Pressure range: -1 – 600 bar
• Out Put: 4-20 mA+HART
• Enclosure: IP 65
• Display: LCD
• Burst Pressure: 300% FS
• Connection: Screwed
• Wetted part: SS304
• Diaphragm: SS316
• Accuracy: 0.25 % of FS

• Material: Mild Steel
• Driven Type: Battery
• Color: Blue
• Application: Industrial Use, Pressure Measurement
• Certification: CE Certified
• Type: Pressure Transmitter
• Country of Origin: India

Pressure transmitters are workhorse devices in industrial process control. They convert pressure readings into a standard electrical signal, typically a 4-20mA current loop, that can be easily transmitted over long distances without signal degradation. This allows for remote monitoring and control of pressure in various applications. Expand more Here's a breakdown of typical pressure transmitter specifications: General Specifications · Pressure Range: The range of pressure the transmitter can measure.. Ranges can vary widely, from fractions of a psi to thousands of psi (or bar).exclamation · Accuracy: Expressed as a percentage of full scale (%FS).. Typical accuracy for good quality transmitters is ±0.1%FS.. · Output Signal: The most common output signal is a 4-20mA current loop.. Other options include 0-5V or 0-10V voltage output. · Supply Voltage: The voltage required to power the transmitter. This is typically 24VDC. Performance Specifications · Temperature Limits: The operating temperature range of the transmitter.. This will depend on the materials used in its construction. · Proof Pressure: The maximum pressure the transmitter can withstand without permanent damage.. This is typically 1.5 to 2 times the upper limit of the pressure range. · Burst Pressure: The pressure that will cause the transmitter to fail catastrophically. This is typically 4 times the upper limit of the pressure range.exclamation · Response Time: The time it takes for the transmitter output to respond to a change in pressure.. This is typically in milliseconds (ms).   Environmental Specifications · Ingress Protection (IP rating): A rating that specifies the level of protection against dust and water ingress.. For example, an IP67 rated transmitter is dust tight and can withstand immersion in water up to 1 meter deep. · Material of Construction: The materials used in the wetted parts of the transmitter (the parts that come into contact with the process fluid). Common materials include stainless steel, Hastelloy C, and Monel. Additional Features · Communication Protocol: Some transmitters include a communication protocol, such as HART, that allows for remote configuration and diagnostics. · Display: Some transmitters have a built-in display that shows the pressure reading. · Calibration: Transmitters need to be calibrated periodically to ensure accuracy.. Some transmitters have features that make calibration easier, such as zero and span adjustments. Here are some additional factors to consider when selecting a pressure transmitter: · Process Connection: The type of fitting used to connect the transmitter to the process. Common process connections include NPT, flange, and sanitary tri-clamp. · Electrical Connections: The type of electrical connector used to connect the transmitter to the power supply and output signal. By considering these specifications and factors, you can select a pressure transmitter that is suitable for your specific application.

• Brand Name: Prignitz
• Material: Aluminium, Plastic
• Color: Grey
• Application: Industrial Use
• Country of Origin: India
• Pressure: 0-100 psi
• Current: 4 to 20 mA
• Ip Rating: Ip 68

The CPS Series submersible liquid level sensors are approved to Class I Div 1, Groups C and D for use in intrinsically safe areas with an approved barrier. It is also certified for ATEX / IECEx/CCOE Class I Zone 0 Exia IIC T4 Ga (Ta = -40 DegreeC to +80 DegreeC). For pressure ranges from 0-1 to 0-100 PSI that requires a wide range of media compatibility, the submersible series is an excellent solution to level monitoring for indoor and outdoor applications. The CPS level sensors are completely sealed for submersion, yet vented through the cable to correct for barometric pressure changes. The welded housing is tested in-house via a helium leak tester to ensure proper protection.In this configuration, the sensor continuously monitors the tank level through a threaded connection outside the tank, yet remains fully submersible for applications with flood-prone environments or severe wash-down conditions.

• Measuring-range Pressure: -1 - 1000 bar
• Process-temperature: -40 - 200 °C
• Process pressure: -1 - 1000 bar
• Accuracy: 0.075 %
• Threaded connection: ≥ G½, ≥ ½ NPT
• Flange-connection: ≥ DN25, ≥ 1
• Ambient temperature: -40 - 80 °C
• Process fitting: Threads from G½, flanges from DN 16, 1
• Operating voltage: 9.6 - 35 V DC

• Brand Name: Huba Control
• Color: Metallic
• Pressure: RANGE -1-5 BAR OUTPUT 4-20mA
• Power Supply: 7 - 33 VDC
• Application: Industrial Use, Pressure Measurement
• Model Number: Huba Pressure Transmitter Model 520.917S032401W
• Feature: Durable, High Performance
• Type: Pressure Transmitter
• Weight: 200-250gm
• Frequency: 50Hz
• Country of Origin: India
• output signal: 4 - 20 MA

• Color: Black And Orange
• Power Supply: 24 Vdc
• Application: Industrial Use, Pressure Measurement
• Type: Digital Pressure Transmitter
• Accuracy: 0.5
• Country of Origin: India

Digital Pressure Transmitter Make : MYKO Model : MK-PX5-D Range.As Per Required Output : 4-20 mA Process connection 1/4 BSP male Accuracy : ± 0. 5% F.S Max Temp : 125°C Supply : 24 V DC

• Brand Name: Danfoss
• Material: Danfoss
• Application: Pressure Measurement
• Feature: High Performance, Stable Performance
• Frequency: 50Hz
• Country of Origin: India
• Temperature: -25 +85deg C
• Model Number: MBS 3000

The pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions. MBS 3000 is designed to cover requirements in most environments and therefore it is a highly flexible product widely used in most applications.   Features and benefits Designed for use in almost all industrial environments Resistant to cavitation, liquid hammer and pressure peaks (MBS 3050) Enclosure and wetted parts of acid-resistant in it’s fully welded design – Stainless steel (AISI 316L) High Performance Robust, shock- and vibration-resistant solution with high-electromagnetic compatibility harsh water, and air, and marine applications. Longer component lifespan and reduced warranty cost. Pressure ranges in relative (gauge) or absolute from 1 up to 600 bar All standard output signals: 4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V, 1 – 10 V A wide range of pressure and electrical connections

• Country of Origin: India
• Output: 4-20mADC
• Compatible: Programmable Transmitters HART Compatible
• Wire: 2 Wire (24 VDC)
• Diaphragm: SS316
• Indication: Local indication
• Protection: IP-65
• Accuracy: 0.075% (DPT) & +/-0.25%(PT) of High Accuracy

Pyrotech's high-performance HART Pressure Transmitter & Differential Pressure Transmitters are designed with capacitive sensing technology, smart Pressure & Differential pressure transmitter are capable of measuring both liquid and gasses. They are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants, and steel and industrial plants. Pyrotech offers field selectable transmitters with an accuracy of 0.075%. Applications Oil pipelines Power stations Gas compressor stations Water treatment plants Steel plants Fertilizer plants Features Type - Capacitance/Diffusion Silicon type/Absolute and Flange Available in intrinsic safety, ex-proof models, Flanged, and Remote / Diaphragm seal transmitters. Also available with HART/Profibus PA. Industrial Grade transmitters User friendly Aluminum die-casting outer shell.  

• Brand Name: Siemens
• Type: 408642
• Condition: Used Working
• SKU: TRA/SIE/7MF13
• PN: 100
• Power: 24 V

We are offering pressure transmitter.

• output signal: 4 to 20 mA
• Measuring Range: Refer Table - A
• Overload Pressure: 1.5 Times the Rated Value
• Supply Voltage: 9 to 30 V DC
• Accuracy: ±0.5% F.S.
• Long-term Stabilily: ±0.2 %/FS,/Year
• Overload Resistance: 50 {V- 12]Ω
• Temp. Coefficient: ≤1x0.0001°C - F.S.
• Response Time: 10ms
• Compensated Temp.: -10
• Span & full scale Adjustment: ±5% by two trimmers
• Protection: IP 65
• Weight Approx: 165 g

• Brand Name: ELECTRONET
• Material: Aluminium, SS
• Driven Type: 12 To 36V DC
• Color: Silver
• Power Supply: 12 To 36V DC
• Application: Industrial Use, Pressure Measurement
• Certification: CE Certified, ISO,NABL Ceritficate
• Feature: Auto Controller, Durable, High Performance, Stable Performance
• Type: Digital Pressure Transmitter
• Accuracy: < ± 0.1 Of Range
• Country of Origin: India
• Range: -0 To 250 Bar
• Temperature: -25 +85deg C

• Brand Name: Masibus
• Material: Aluminium
• Driven Type: Electric
• Application: Pressure Measurement
• Feature: Durable, Stable Performance
• Type: Differential Pressure Transmitters
• Country of Origin: India
• Model Name/Number: DPT7S10

• Material: Metal
• Color: Metallic
• Feature: Durable
• Frequency: 50Hz
• Temperature: -25 +85deg C
• Usage: Industrial

Being a quality-conscious firm, we ensure that the offered products comply with the laid industry standards and are of supreme quality. Whether it is a bulk or retail order, we can deliver it on time. We have transportation resources on standby all year round to ensure hassle free distribution of our product. Our sophisticated differential transmitters are suitable for liquid gas and steam and available with a quality warranty of 12months.

• output signal: 0.5-45V,4-20mA,0-V,0-10V
• Power Supply: 12 - 24V
• Model: KLPT-50
• Pressure range: Q-1 Bar to 0-1000 Bar.
• Accuracy: + 0.5% FS
• Overload pressure: 2* FSO
• Working temprature: - 40°C
• Temperature drfit: + 0.02%FSIK
• Electrical connection: M12 aviation plug
• Process connection: G1/4 , 1/4NPT , R1/4 , or other
• IP rating: IP67

• Make: wika

Model No: PRESSURE TRANSMITTER IS30-31 PRESSURE TRANSMITTER S201) PRESSURE TRANSMITTER IS30-31 PRESSURE TRANSMITTER S20     Suitable for applications in potentially explosive atmospheres. These pressure transmitters are designed for highest industrial requirements and have have ATEX approvals.   Specifications: Measuring ranges -1…1000 bar Output: 4..20 mA ATEX-approved Devices for Ex areasSuitable for applications in potentially explosive atmospheres. These pressure transmitters are designed for highest industrial requirements and have have ATEX approvals.   Measuring ranges -1…1000 bar Output: 4..20 mA ATEX-approved Devices for Ex areasSuitable for applications in potentially explosive atmospheres. These pressure transmitters are designed for highest industrial requirements and have have ATEX approvals.   Measuring ranges -1…1000 bar Output: 4..20 mA ATEX-approved Devices for Ex areas

• Material: Metal
• Application: Pressure Measurement
• Color: Blue, Silver
• Feature: Durable, High Performance, Stable Performance
• Country of Origin: India
• Output (Optional): 4 - 20 mA

We are offering honeywell differential pressure transmitter honeywell products we offer finds extensive usage across varied industries. We offer brass honeywell products are made available to the clients in secured packing within a stipulated time frame. Avail from us honeywell products at rock bottom prices. We are a reputed honeywell products manufacturer, exporter and supplier based in india.