Rubber Lagging Sheet Dealers

• Hardness: 50-100 Shore A
• Tensile Strength: 12 Mpa
• Max Temperature: 100 Degree
• Certification: ISO 9001:2008 Certification
• Color: Black

Clients can avail a quality range of Pulley Lagging Rubber Sheets from us. These Pulley Lagging Rubber Sheets are known for improving the friction coefficient between conveyor belt and driven pulley, and thus are used for covering the pulleys under the rubber conveyor belt. These Pulley Lagging Rubber Sheets have diamond grooved design on top surface, and another surface is anti-skid that eases the installation. We use mixture of natural and synthetic rubber for the manufacturing of these Pulley Lagging Rubber Sheets. These sheets are used in various industries for bulk handling, and are resistant to adverse weather, temperature, and radiation etc.   Features : Pulley Lagging Rubber Sheets are resistant to heat, oil, temperature, whether, ageing and are abrasion resistant for long term service.   Application : Used in almost every industry for bulk handling.   Size Length x Width : 1meter x 2 meters, or as per customer’s requirement. Thickness 8mm 10mm 12mm 15mm Surface : Smooth on both sides (plain rubber sheets) Diamond groove on one side & fabric-impression/smooth on other side.   Skirt board rubber strips or sheets are also a part conveyor belt system; it is placed at both sides of conveyor belt to prevent the fall of material carried on conveyor belt. We manufacture skirt rubber sheets in a wide range of width, length & thickness.

• Country of Origin: India
• Type: Epdm Rubber Sheet
• Pattern: Plain
• Color: Black
• Water Resistance: Yes
• Brand Name: rabbit
• Material: Neoprene
• Crack Resistance: Yes
• Certification: ISO 9001:2008 Certification
• Is It Adhesive: Yes
• Shape: Square
• Thickness: 0.5mm
• Width: 500-1000mm
• Length: AS PER BUYER REQURIEMENT
• Usage: industrial uses
• Specialties: Smooth Surface, Good For Water Repellent
• Finishing: Polished

We exports rubber products like rubber sheets.Mainly we are involving with FORWEAR, FORCHEM, FORSKIRT, FORSYN. The types of rubber sheers we can give are as mention below:Chloroprene Rubber Sheets.

We offer zenith pulley lagging rubber sheets. Available with withwithout neoprene bonding in - small square large diamond designs

• Width: 2000 mm
• Color: Black & White
• Thickness: 1mm to 20mm

We in consistence technically design manufacture and export huge quantity of Diamond Groove Grip Rubber Sheets with bare bottom according to our buyers users requirements in Diamond Rubber Grooves with Heights of 10mm, 12mm and 14mm. These Rubber Sheets are available in various types and designs with specifications:

• Material: Rubber
• Application: Used for making Conveyor Belts
• Available with: Bonding Layer & Without Bonding Layer
• Benefits: Eliminates belt slippage, increases belt life, its open design dissipates dirt
• Application: Industrial
• Quality: Optimum

We are leading manufacturers & exporters of all type of premium quality Rubber Lagging sheets for Conveyor Pulleys.Our Rubber Lagging Sheets are available in various sizes and specifications that can be customized to meet specific requirements of the clients.Diamond Grooved : Our Rubber Lagging Sheet eliminates belt slippage, increases belt life, its open design dissipates dirt, water and material build-up. Diamond Pattern Lagging: Ideal for all type of diameter pulleys on systems with conveyor belt. It prevents belt from slippage (in particular when water is present) and increase the drive traction of the pulley. It also deflects water into lateral or diamond shaped grooves, away from pulleys. Diamond Grooved Pattern: diamond grooved /pulley lagging rubber sheet provide protection from wear and corrosion and reduce material build-up. We are manufacturing and supplying, our Lagging sheets in various Cover Grades with different Profiles like Grade Covers Abrasion Resistant HR / SHR Grade FR Grade White / Hygienic, Food Grade Big Diamond, Mini Diamond Small Diamond Square Diamond (Best profile with high flexibility, which can be easily used from both directions, which helps in reducing wastage). Plain Rubber Lagging Hearing Bone / Wavy Top Lagging   Strip Lagging : Strip lagging is an cost effective, convenient, more durable & flexible, air bubble resistant pulley lagging process. There is almost no/ minimal wastage of ‘INSTA STRIP’ rubber lagging sheet material. It is available in standard / manageable/ maneuverable size of 200 mm / 400 mm width and continuous length of 50 / 100 meters or tailor made as per customer requirements (still larger diameter rolls are available subject to transportable diameter/ weight). ‘INSTA STRIP’ is light weight , handy and easy to install.‘INSTA STRIP’ strip lagging being manageable / maneuverable is easy to install , removal of entrapped air is possible, requiring less down time.‘INSTA STRIP’ strip lagging sheet is available with SPECIAL BONDER RUBBER. This feature facilitates strip lagging application directly to the pulley (no buffing/ grinding of ‘Insta Strip’ is required) and offers very high bond strength between pulley and the strip lagging.We are manufacturing and supplying, our Lagging sheets in various Cover Grades like in Big diamond / Small diamond Abrasion Resistant FR Grade HR / SHR Grade White / Hygienic, Food Grade RUBBER SKIRTING Available in Thickness: 5 mm to 40 mm. Available for Special Application: Heat Resistant Grade, Fire Retardant, Hygienic. Conveyor belt skirting rubber is used extensively for sealing on plant and equipment used for processing and material handling. Skirting rubber is primarily designed for use as a sealing strip around conveyor system loading, transfer and discharge points to direct material onto the conveyor belt and reduces spillage. It is also suitable for use in any application which requires a flexible and durable sealing material. Skirting rubber is available in full width slabs or pre-cut skirting rubber strips to suit standard conveyor system designs. Custom width & thickness of Rubber Skirting strips can also be supplied as per customer requirements. Continental Conveyors (P) Limited has the technical expertise to advise the best skirting rubber solution based on specific application requirements.Rubber Skirt Blocks : Continental Conveyors (P) Limited, Skirt sealing system is designed to seal the skirt at the loading station of the conveyor. The segmented rubber blocks guided by the guide plate on one face and supported by serrated clamps plates on the other face ensure effective sealing to match belt profile.VULCANIZING SOLUTION : The ‘CCPL-INSTACON’ R & D team has designed and developed “INSTA FIX” a high peel strength, reliable, instant ready to use jointing/ vulcanizing solution for belt jointing, belt repairing, pulley lagging fixing etc.Benefits of ‘INSTA FIX’ The belt joint, repaired portion can be put to use instantaneously, it is readily available, easy to handle and store. High peel strength. ‘Insta fix’ can be used for jointing, repairing, lagging etc. The chances and fear of jointing area contamination is eliminated as the jointing is instant and no drying or waiting is required. It does not require special procedures. Require normal storage conditions. We are more than positive that after going through the merits of ‘INSTA FIX’ you would like to go for a trial to avail all the benefits offered by ‘INSTA FIX’ to the best of your organizations gain e.g. reliable, instant, easy, clean, jointing/ repairing of the conveyor belts thereby saving precious time and money. On our part, through our other quality products and services, we assure reliable, easy and cost effective material conveying at all times. VULCON INSTAFIX (Available for Heat Resistant & FR Grade Belts.) ‘Insta fix’ can be used for jointing, repairing, lagging etc. Hot Vulcanizing Kits Skim Compound & Cover Compound RUBBER GOURMET / BEADING : Our Rubber Beading / Gourmet are in compliance with industrial standards, which are manufactured with best quality rubber. Our “CCPL-INSTACON” make Rubber Beading which are Water Proof have Super-fine finishing and high durability. We can manufacture & supply as per standard design & as per customer’s requirement.IMPACT RUBBER RINGS : Can be manufactured in various sizes for Critical & Super-Critical Applications with maintained Hardness as per Application with Anti-Abrasive Properties.Impact Rubber Rings are used for Material Conveying Machineries / Equipments.We manufacture & export high quality Impact Rings, deliver ultimate performance with superior flexibility.RUBBER SCRAPPER : We have been manufacturing & exporting Rubber Scrappers, which are used in material handling systems, to keep the Conveyor belts clean and to avoid rollback of material and spillage. Our Rubber Scrappers are very cost effective measure to, keep industrial belts clean. Our Scrappers helps in reducing maintenance and lower the downtime, and can be used in Critical & Super-Critical applications. We manufacture various types of Rubber Scrappers for Internal as well as External cleaning of rubber Conveyor Belts.

• Thickness: 8mm to 25mm
• Tensile Strength: Upto 20 MPa
• Material: RUBBER
• Shape: Square, Rectangular
• Standard Thickness: 6 mm to 40 mm
• Standard Width: 1.0, 1.2, 1.4, 1.5 Mtr, 40",48", 54", 60" inches
• You Supply In: Roll, Sheet
• Brand: Rabbit

Specially made for conveyor pulley rubber lagging, tank lining etc… Extra bonding power and high abrasion resistant. Available in standard profiles, plain, diamond grooved, square grooved, ceramic embedded etc.. It has sticking element at bottom for extra bonding. Various thicknesses available,2mm & above. No curing time required.

• Country of Origin: India
• Color: Black
• Material: Natural Rubber
• Warranty: 1 Year
• Width: 500-1000mm
• Length: 2.4mtrs
• Specialties: Smooth Surface
• Min Temperature: 10 Degree
• Max Temperature: 50 Degree
• Tensile Strength: 60 Kg/cm2
• Packaging Type: Roll
• Standard Length: 10 Mtr, 33 Ft, 11 Yard
• Standard Thickness: 6 mm to 40 mm
• Rubber hardness: 65±5 Shore A
• Installation: Can be installed by cold vulcanization

We are supplier of diamond pulley lagging rubber sheet. Its use in conveyor pulley .its very good quality of rubber.

• Type: Industrial Pulleys
• Shape: Round
• Uses: Crane Use, Machinery
• Color: Grey
• Surface Finishing: Polished
• Specialities: Durable, High Quality

We are offering diamond grooved rubber sheet, pulley lagging rubber sheet. duratuf pulley lagging prevents belt slippage and protects from wear and corrosion and reduces material build-up. It also influences belt tracking positively. We manufacture pulley lagging in diamond, square, round profile and ceramic lagging, with or without special bonding layer. duratuf diamond groove pulley lagging is a high grade natural rubber specifically designed to display excellent abrasion and ozone resistance. It has a diamond profile grooved surface to increase grip and disperse water and contaminants from the pulley surface duratuf diamond groove pulley lagging is manufactured with a neoprene based cn bonding layer for easy bonding to pulley surfaces. This layer requires no buffing and can be used with many 2-part neoprene based lining glues. Diamond groove sheet pulley lagging is supplied in rolls for off-site application, allowing the pulley to be fully covered with a single sheet. duratuf provides and installs pulley lagging of various types, namely, • plain • diamond grooved • ceramic tiled • button profile • lagging segment strip

• Country of Origin: India
• Pattern: Plain
• Color: Black
• Material: Rubber
• Shape: Square
• Thickness: 0.5mm

We hold expertise in supplying precision engineered Pulley Lagging Rubber Sheet. Our Pulley Lagging Rubber Sheet is available in different sizes, shapes and specifications. It is used in households, packaging industries etc. Further, Pulley Lagging Rubber Sheet is widely applauded by the customers for its excellent quality, flawless finish and high durability.

• Material: High Quality Raw Material
• Shape: Round
• Thickness: 20-25mm
• Certification: ISI Certified
• Product Type: Pulley Lagging
• Condition: Good
• Packaging: Bulk
• Place Of Origin: Sangli

Pulley lagging increases the traction between the belt and the pulley, which in turn reduces load and wear on the drive, belt, pulleys, bearings and take-up. key benefits: Extends the life of key conveyor components. Reduces wear from abrasive materials. Prevents belt slippage by increasing the coefficient of friction between the conveyor belt and the pulley. Creates a self-cleaning action on the pulley surface and prevents the buildup of transported bulk material, water, snow or ice.