Solar Inverter Dealers in Roorkee

Eapro pure sine wave smart high power solar inverter incorporates worlds most advanced technology of wireless communication with the inverters.

Solar Energy is a best alternative energy solution. The visible light from the SUN (Solar energy) can be converted into electric energy by Photovoltaic Cells. It has potential to cater the emerging needs of the power throughout the world. Solar Hybrid Inverters are cost effective and easy to install. EAPRO True Hybrid Solar Home UPS is the most innovative and advance UPS that runs both on solar power (generated through solar panels) and the utility (grid) power supply. EAPRO True Hybrid Solar Home UPS is the advanced solar hybrid home UPS which charge the battery thru readily available solar energy Mains by using it’s artificial intelligence. It’s ISSRC logic use Solar Power for its maximize utilization to empower homes.

Solar Energy is a best alternative energy solution. The visible light from the SUN (Solar energy) can be converted into electric energy by Photovoltaic Cells. It has potential to cater the emerging needs of the power throughout the world. Solar Hybrid Inverters are cost effective and easy to install.EAPRO True Hybrid Solar Home UPS is the most innovative and advance UPS that runs both on solar power (generated through solar panels) and the utility (grid) power supply. EAPRO True Hybrid Solar Home UPS is the advanced solar hybrid home UPS which charge the battery thru readily available solar energy/ Mains by using it’s artificial intelligence. It’s ISSRC logic use Solar Power for its maximize utilization to empower homes.   Model : Sx3 (Smart Solar Selection)Ratings Available : EAPRO True Hybrid Solar Home UPS are available in the following rating. 650/ 850/ 1000 VA in 12V DC 1450/ 2000 VA in 24V DC Solar Panel Connected for 50 Amps PWM/MPPT* Charge Controller (Max.) : 850 Watt panel per 12VDCHow EAPRO True Hybrid Solar Sine wave UPS is different from other Hybrid Solar UPS Intelligent Battery Charging and Load Sharing using High Performance Advance DSP based Pure Sine Wave Technology. ISSRC Logic : Intelligent Solar Selection based on Real Clock Logic. PWM/MPPT* Solar Charge Controller : Inbuilt fully regulated PWM/MPPT* 50/70 Amps (Maximum Power Point Tracking) Charge Controller to get optimum utilization of Solar Power. Ability to provide rated Output Power directly from Solar Panels (if Solar Power is available) in addition to charges the battery simultaneously. Intelligent battery charging from Solar and Mains by giving priority to Solar Power and only remain power consumes from Mains. Ability to run the Output Load exclusively through Solar Power, saving Grid Power and your hard earned money. Provides power from the battery up to 80% charging, when solar and grid power is available and battery is fully charged, resulting save money and save electricity. Intelligent Thermal Management System : Programmed Inbuilt cooling fan which operates as needed with thermal protection to prevent undue loss of energy. Provision to set ‘NO CHARGING of Battery from Mains’ (by pressing a button) for Charging through Solar Power Only resulting true power saving. Key Features Operate on both Solar Power as well as Grid Power. It is integrated with in-built fully regulated PWM/MPPT* Solar Charge Controller for max. Solar Power utilization. It senses the availability of solar power, grid power and accordingly gives preference to charging thru solar power and switches to the grid power if the solar power is not available. It is designed to give you maximum benefit from the solar energy and minimize your electricity bill drastically. Highly efficient battery charging from the solar energy as a result you will get non-stop power, save money, save electricity and protect the environment. Advanced DSP based technology for absolute and stable and 100% pure sine wave output. Indications for Mains ON, UPS ON, Batt. Low, Charging/ Discharging, Over Load, Short Circuit, Thermal Trip, Solar available/ Not available and PV reverse on LCD Display. User- friendly LCD for the display of mode of operation and all parameters. Dual Mode of working : UPS and Normal UPS Mode : Fast switching, Input operating range from 180V to 260V. Normal Mode : Wide Input operating range from 100V. Closed Loop Auto Sensing Software Control (ASSC) Smart Battery Charging Technology for longer battery life, while charging either by Solar power or grid power. Dual selectable charging current option for Normal Charging and High Charging. Intelligent overload sensing circuitry with auto retries facility. Programmable thermal protection : cooling fan which operates as needed. High Power new generation MOSFET cable to handle high in-rush/ surge current. Double stage MOSFET Over Current Protection by measuring Rds ON. Highest efficiency at lower cost. Pure Sine Wave Output with low Total Harmonic Distortion (TDH). High End DSP based design of Solar Charge Controller for charging thru Solar Power. Pulse by pulse current limiting with auto-reset resulting in efficient overload and short circuit protection. Eco-friendly operation. Solar PV reverse voltage Protection. Electronic Over Current Charging Protection. Reverse Current Flow Protection from Battery to Solar Panel generally during night. No mechanical contact for charge Controller. Designed for continuous reliable and robust operation. # If solar is available and battery declared as full charged, then Mains will automatic cut till battery discharge upto pre-defined level.   Multi Color LCD Display Colors Yellow Color : For Inverter/ UPS mode. No AC Mains (Utility Power) Green Color : When AC mains (Utility Power) is available Red Color : In case of any Abnormal Condition Displaying Parameters AC mains voltage O/P Load in % Battery input voltage Battery Charging/ Discharging current (Bar Graph) Faults Status Overload PV Reverse Short Circuit Fuse Trip Over Temp (Thermometer) Low Battery (Empty ‘Battery’ Blinking) Inverter Status Solar availability Status   ProtectionPV Reverse, Reverse Current Flow (to PV module), Battery Voltage Low (4 Auto Retries), Over Load (6 Auto Retries), Battery full Charge, Over Temperature, Short Circuit    

• Input Voltage Range (Normal Mode): 100 to 280 VAC ± 5 VAC (Wide Range)
• Input Voltage Range (UPS Mode): 180 to 260 VAC ± 5VAC
• Changeover Time Maximum: < 30 ms (in Normal Mode) and < 10 ms (in UPS Mode)
• Max. Charging Current (NC): 10A + 1A
• Max. Charging Current (HC): 14A + 1A
• Boost Charging Voltage: 14.4 ± 0.2 VDC per Batt.
• Float Charging Voltage: 13.7 ± 0.2 VDC per Batt.

 PoEAPRO Pure Sine Wave Smart High Power Solar Inverter/UPS series incorporates world’s most advanced Technology of wireless communication with the Inverters. This Smart Solar Industrial UPS provides advance comfortability to the check/see the real time values or status of the Inverter system. There are mainly three types of Smart Solutions :  2.4GHz Wireless Remote Solution Mobile Solution (GSM/GPRS) Wired (LAN)/Wireless (WiFi) SNMP SolutionSolar Energy is a best alternative energy solution. The visible light from the SUN (Solar energy) can be converted into electric energy by Photovoltaic Cells. Solar Inverter is cost effective and easy to install. It has potential to cater the emerging needs of the power throughout the world.EAPRO Smart High Power Solar Inverter/UPS series incorporates world’s most advanced DSP based 20 KHz Pulse Width Modulation technology to drive IGBT/MOSFET for increased crest factor for Industrial use. It provides stable output to operate the sensitive machinery and office equipment like computers, printers, photocopiers etc and even the Air-Conditioners. It also provides true sine wave power which is purer then the grid power which is free from any surges, transients and other EMI effects. EAPRO Pure Sine wave Smart High Power Solar Inverter/UPS series cares your expensive, sensitive home, office and industrial equipments for their extended service life as it is designed to suppress the harmonic distortion. Closed Loop Auto Sensing Software Control (ASSC) Smart Charging circuit charges the battery for the enhanced battery life. It has the exclusive capability to provide longer power backup due to faster charging.EAPRO Smart High Power Solar Inverter/UPS are of world class in terms of Performance, Durability, Reliability & Efficiency. Application  Most leading Power Back up source for big House, Industries, corporate offices and BPOs. Provides reliable back-up to Office Equipments like Computers, Projectors, Printers, Scanners and Fax Machines etc. Suitable for Banks, Multiplexes and Shopping malls. Suitable for all motor based applications like AC, Fire Pumps, Water Pumps, Compressors, Water Coolers, Deep Refrigerators and other 3 Phase critical motorized equipments. Suitable Petrol Pumps, Fuel Dispensers. Emergency and Transportable Power Systems. Gym Equipments /Health Equipments like Joggers etc.Key Features of Smart UPS Enables control from almost anywhere (more comfortable). Instant alerts & emergency control. It is a cost effective solution so it Encourage standardization. Optimal for people with reduced mobility. It can be combined with local control to give higher flexibility. Smart UPS can be accessible via Smartphone. Controlling and monitoring through Internet. Can upgrade the firmware of the UPS through Internet. We make it scalable for further add-ons. Remote Control is necessary as in case you are not at home and UPS is installed at Home. Developing low-price systems will accelerate the process of turning our UPS intelligent. The price of the “intelligent UPS” in a house in comparison with its “facility” is much more significant. It is suitable for inexperienced users or even for disabled people. Features of Wireless Remote LCD Display for displaying UPS parameters, conditions and Wireless Network status. Switch with LED indication for UPS Functionality. Dual Side (UPS and Remote) control by wireless communication. Enter Sleep mode after 2 min for Power Saving when there is no operation. Wake up from power saving on following condition: Fault in the UPS (Short Circuit, Over Load, Battery Low etc.) Mains Cut or Mains On Switch operation from UPS Side Switch operation from Remote Side Features of Mobile Solution (GSM) Whenever user will give a call to saved no. in UPS, The call will automatically get disconnected and UPS will send all the UPS data to called number via SMS. You can save contact numbers and Email id’s via a frontend software. Whenever any UPS fault occurs, UPS will send alarm Message to the saved numbers. UPS can also send mail through GPRS. UPS files can also save in memory card and user can access them through GPRS whenever they want. Features of Wireless/WiFi SNMP Live Monitoring and Control through computer. Graphics View for easy monitoring. Information of faults to the user via SMS and Email. One month storage of UPS data in Database. Hibernate the PC at fault conditions like battery low of UPS for user data saving. UPS trap message will show automatically at any UPS fault. Additional Features Latest DSP based technology using 20 KHz PWM technology for absolute and stable sine wave output. Regulated output voltage and frequency for smooth and quite operations of AC motors and Inductive loads unlike the irritating noise that comes from Modified Sine Wave Systems. Instant changeover by electronic switch for High reliability ensuring compatibility with Computers. Special TDR (Time Delay Relay), for compressor based applications like AC. (Optional) Capability of Surge Load upto 300%. Extremely low Total Harmonic Distortion (

• Brand Name: CONZSUN

We are offering solar inverter.

Battery, cyber ups, Home UPS, Induction Cookers, Inverter, lift backup ups