Mineral Ores Dealers in Udit Nagar, Rourkela

• Material: Iron Ore
• Application: Industrial Use
• Color: Black
• Feature: Good Quality
• Moisture: 1% max
• Mn: 70% min
• C: 1.5% max

We are eminent Supplier of Iron Ore from Rourkela, Odisha. Iron Ore, we make available, is a rich source of iron oxides and vary in colors from dark grey, deep purple, bright yellow to rusty red. Our Iron Ore is free from adulteration and can be easily processed for further applications. We can make it available in different grades and varying sizes as per customer’s requirement. Customers can contact us for purchasing the quality Iron Ore at affordable rates.

• Certification: PSIC Certified,SGS Certified
• Condition: Finished,New,Raw,Waste
• Form: Ore
• Grade: 2205 duplex,2207 Super Duplex,304,304L,309,310,316,316L,317L,409,410,410S,416,420,430
• Material: Metal
• Texture: Casting,Scale,Solid,Turning
• Application: Industrial Use

We are the main supplier of this product.

• Feature: High Cold Crushing Strength
• Condition: New
• Type: Iron Ore Pellets
• Country of Origin: Raurkela,India
• Benefits: Stable Blast Furnace operation,Less Handling losses ,Increased campaign life etc.

Krishna Metal & Alloys is one of the reliable Sourcing Agents of Iron Ore Pellets. Iron Ore Pellets are superior to other substitutes due to its High Cold Crushing Strength resulting in minimal fines generation while multiple handling and resulting in increased savings. With uniform composition of material, size and Guaranteed Porosity, Swelling Index and negligible moisture due to dry process provides an added advantage for Smooth Operation in Kiln / Furnace and improves productivity. Benefits of Iron Ore Pellets : Stable Blast Furnace operationLess Handling losses Superior permeability due to size uniformityLess specific consumption of coalHigh Blast Furnace productivityIncreased campaign lifeLower coke rate of Blast FurnaceLow Refractory repairing costBetter Sponge Iron QualityOverall lower cost of productionLess fines generation in sponge iron kilnBetter environmental conditions

• color: Metalic Grey to Brown
• Fe(T): 88 to 92 %
• Sulfur: Below O.01%

We are offering iron ore fines. Smelting iron nuggets or pellets as popularly known is produced from iron ore fines. This product melts in furnace to make steel, pig iron, iron alloys etc. This reduces the cost of iron making drastically. .

We are identified as one of the most prominent Wholesale Fine Iron Ore Suppliers based in India. Our High Grade Iron Ore Fines are procured from the finest mines of Orissa. These Fines allows smooth production of Pure Iron. Our Iron Ore Fines contains maximum percentage of Pure Iron. Besides, only few percent of impurities are found in our Fines such as aluminum, silicon, zinc, tin, etc. Thus, Our Ore is the finest component to extract Pure Iron as per the industrial need. In addition to the above facts, we offer quality Iron Ore Fines at the most discounted Price in the Industry.

• Material: Iron Ore
• Application: Industrial Use
• Packaging Type: Plastic Bags
• Feature: Good Quality, Long Shelf Life
• Sulphur: 0.02 %
• Specific Gravity: 3.45g/cm3

• Brand Name: Pasimin
• Country of Origin: Rourkela  
• Quality: Best
• Packaging: Bulk
• Condition: New

We are counted among the reputed Manufacturers, Exporters and Suppliers of Refractory for Sponge Iron Plant from Odisha, India. We make use of quality tested basic material for manufacturing the product as per the pre-established industry norms. In order to cater the best quality product, our Refractory for Sponge Iron Plant is tested on several parameters for quality assurance. We offer Refractory for Sponge Iron Plant at the best market prices to our esteemed customers.   Description : The PAS LCM series castables are the most appropriate Refractories for all sorts of Iron-making kilns including Sponge Iron Rotary Kilns because PAS LCM series castables are Low Cement castables based on Mullite. But what is it so that Mullite makes the PAS LCM series the most appropriate one? It is a universally acclaimed and accepted truth that Mullite is the only suitable material for use in a reducing atmosphere. The reason is that Bauxite loses its refractoriness at just 900 degC under reducing atmosphere. Mullite has a lath-like structure. This makes Mullite special on two counts: Mullite has less thermal conductivity compared to the traditional Bauxite-Clay castables. Because of the flexible and interlocking nature of the lath-like structure, Mullite offers a high resistance to spalling. Reaction with the accretion : Any natural raw material like Bauxite / Calcined Clay has localized pockets of impurities : the most dangerous one being the Fe2O3. This Fe2O3 which is in a free state in natural raw materials, gets reduced and come out along with Sponge Iron / Pig Iron leaving pinholes inside the lining. These voids make room for the penetration of the highly viscous accretion at the elevated temperature. Once cooled down, this accretion forms a bond with the castable lining and at the time of accretion removal, it comes out by peeling off chunks of castable from the lining. On the other hand, the Fe2O3 present in Mullitic castables is evenly distributed and in a solid solution with the surroundings. So it is not in a free state and so it does not react with the accretion. Thus no question of any bond formation with the accretion. At the time of removal, accretion comes out without damaging the lining. Mullite has Sufficient mechanical strength at elevated temperatures to bear and withstand the mechanical attack like load, wear, impact, abrasion inside the kiln. Mullite has the lowest possible radiation loss. This helps in saving fuel and thus in saving money. Volume for volume, Mullitic castables are lighter than castables for equivalent usage. So the total weight of the refractory is less and hence less load is imparted on the kiln structures.   Details : Refractory for Sponge Iron Plant 45 Refractory for Sponge Iron Plant 50 Refractory for Sponge Iron Plant 60 Refractory for Sponge Iron Plant 70 Refractory for Sponge Iron Plant PASHEAT 'A' Refractory for Sponge Iron Plant PASHEAT 'C' Refractory for Sponge Iron Plant PASHEAT 'K'

We are offering quartz minerals. Taiba corporation is manufacturer of quartz buyers can apply their quotes.

We are backed by the most sophisticated transit system, thus buyers can stay rest assured for timely delivery of the orders. To protect our products from being damaged during transit/ handling, we use industrial grade packaging materials. Furthermore, we ensure the packs are appealing for marketing purposes.

Avail from us the best quality Iron Ore Fines, which are free from any kind of dirt and facilitate a smooth production process for the metal. These Iron Ore Fines possess high percentage of iron and contain fewer impurities such as silicon, aluminum oxide, zinc, tin and moisture. These Iron Ore Fines are widely used in various industries for the production of iron based materials.

We are offering Iron ore

We are renowned as one of the preeminent Suppliers of Iron Ore Fines, based in India. The Iron Ore Fines, offered by us, are widely supplied to various industrial sectors due to the unmatched quality and unsurpassable performance. Additionally, customers are eased with the availability of the Iron Ore Fines that meet the international standards. Grades : 63, 62.5, 60, 58, 57 and below Specifications Fe : 55%-62.5%S : 0.090%P : 0.045%Zn : 0.004% Uses The gas is used for the DRI (Direct Reduction Iron and Iron Ore) process. The use of Iron Ore Fine involves a lower capital investment. Purpose of Export Only.

We are offering sponge iron sponge iron is a metallic product produced through direct reduction of iron ore in the solid state. It is mainly used in making steels. We also manufacture high grade sponge iron in the brand name of (rexon strips limited).

• Fe Total: 65.5% min.
• Silica + Alumina: 3.75% max.
• Sulphur: 0.005% max.

Orissa is known as one of the largest mineral rich State in India having abundant mineral reserves of iron ore, coal, dolomite etc. required to feed steel plants all over India. After a long research and experiments by visiting different iron ore processing plants in China, the company has decided to establish one Iron Ore Pelletization project having a capacity of 300000 TPA as backward integration after in-house beneficiation of low grade iron ore fines with its own technology.   Iron Ore Pellets are regarded as the superior feed material at lower cost as compared to calibrated iron ore.   High quality pellets are being produced using iron ore fines duly beneficiated in-house for more value addition to raw-materials, which substitutes costly iron ore.

Iron Ore Pellets, Hms1 Scrap, TMT Bars, Sponge Iron, Pig Iron

Sponge Iron, Beams, Steel Angles, steel, Pig Iron, Iron, blooms, Billets

Quartz, Quartzite Stone

We are offering iron ore pellets.

Slide Gate Refractories, silica products, Sodium Nitrate

Coal

Sponge Iron, Metal Ingots

• IRON 60-65% fe: Mn.- 28-48%

We are offering iron ore & fines, manganese ore. available in large quantity with all required grades of both the minerals.

Sponge Iron, Iron Ores

Iron Ore Fine, magnese ore

Coal Lumps

Refractories

Coke