Apparatus International Himatnagar, Sabarkantha, Gujarat

Weld neck flanges are connected to pipe by welding the pipe to the neck of the flange, which helps to pass on the stress from the weld neck to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck flanges. Weld neck pipe flanges are generally used in high pressure application, where hot or cold temperatures exist. The inside diameter of a weld neck pipe flange is machined to match the inside diameter of the pipe. Weld neck flanges are widely being used in shipbuilding, power generation, petrochemical plant, water treatment, dairy plant, pharmaceutical plant etc. Standards: asme b.16.5, asme b.16.47 (ab series), b16.48-api590, api 605, awwa c207, bs 10, din 2633, mss-sp-44. Classes: 150 lbs up to 2500 lbs sizes: 12"up to 36" (sizes over 36" available on request) materials: monel, nickel, inconel, hastalloy, titanium, tantalum, stainless steel, alloy steel, carbon steel, cupro-nickel 9010 & 7030 joint faces: rfrtjff

Threaded flanges are widely used in low pressure piping system. There is no welding involved while connecting the flanges to pipes or other equipment. Sometimes the flange may be welded around the joint after assembly, but it is not considered a satisfactory method of increasing its applications. Threaded flanges are also known as screwed flanges and are similar to slip-on flanges, but the bore is threaded to enable assembling without welding. Threaded flanges are usually used with pipes that have external threads. Threaded flanges are widely being used in shipbuilding, power generation, petrochemical plant, water treatment, dairy plant, pharmaceutical plant etc. standards: asme b.16.5, asme b.16.47 (ab series), b16.48-api590, api 605, awwa c207, bs 10, din 2633, mss-sp-44. Classes: 150 lbs up to 2500 lbs sizes: 12"up to 36" (sizes over 36" available on request) materials: monel, nickel, inconel, hastalloy, titanium, tantalum, stainless steel, alloy steel, carbon steel, cupro-nickel 9010 & 7030 joint faces: rfrtjff

Apparatus International is a leading manufacturer, exporter and supplier of reducing tee and straight tee in a variety of shapes and dimensions. Also known as 3 way pipe fittings, tee fittings resemble the alphabet �T�, where in two horizontal pipes and one vertical pipe can be attached to manage the direction and mixture of fluids. Pipe tees are widely used in piping systems to transport two phase fluid mixtures and are mainly of two types � Equal Tee and Unequal Tee (Reducing Tee). Stainless Steel, Carbon steel and special grade tees are widely supplied by us to many industries such as power generation, petrochemical, shipbuilding, dairy ,chemical, pharmaceutical, etc.

Socket weld flange is similar to the slip-on flange in outline, but the bore is counter bored to accept pipe. Socket welding flanges are typically used on smaller sizes of high pressure pipes. Socket weld flanges are widely used in high pressure systems such as hydraulic equipment and steam lines. Socket weld flanges are attached by inserting the pipe in to the socket end and then applying fillet weld around the hub of the flange. This allows for a smooth bore and batter flow of the fluid inside the pipe. An optional internal weld may be applied in high stress applications. Socket weld flanges are widely being used in shipbuilding, power generation, petrochemical plant, water treatment, dairy plant, pharmaceutical plant etc. standards: asme b.16.5, asme b.16.47 (ab series), b16.48-api590, api 605, awwa c207, bs 10, din 2633, mss-sp-44. Classes: 150 lbs up to 2500 lbs sizes: 12"up to 36" (sizes over 36" available on request) materials: monel, nickel, inconel, hastalloy, titanium, tantalum, stainless steel, alloy steel, carbon steel, cupro-nickel 9010 & 7030 joint faces: rfrtjff

Slip-on flange usually slips over the pipe. Slip-on flange are typically made with an inside diameter of flange slightly larger than the outside diameter of the pipe. This allows the slip on flange to slip over the pipe. Slip-on flanges are welded to provide strength and prevent leakage. Slip-on flange can sometime also have a boss ring or hub and can be made with a bore to suit either pipe or tube. Ring pipe flanges and hub pipe flanges are both considered slip-on flanges as they both slip over pipe. Slip-on flanges are generally preferred by users over weld neck flanges, as they are cheaper option than weld neck flange and the fact that less accuracy is required when cutting pipe to length. Slip-on flanges are widely being used in shipbuilding, power generation, petrochemical plant, water treatment, dairy plant, pharmaceutical plant etc. Standards: ASME B.16.5, ASME B.16.47 (AB Series), B16.48-API590, API 605, AWWA C207, BS 10, DIN 2633, MSS-SP-44. Classes: 150 lbs up to 2500 lbs Sizes: 12"up to 36" (Sizes over 36" available on request)

Apparatus International is a leading manufacturer, exporter and supplier of high quality and high performance steel eccentric reducers and steel concentric reducers in a variety of shapes and dimensions. Our products are manufactured as per ASTM, ASME, DIN, other international standards and as per custom requirement of our customers. Our regular production and stock items include stainless steel reducers, carbon steel reducers, alloy steel reducers and duplex steel reducers. A steel pipe reducer is one of the most commonly used industrial pipe fitting, which helps to connect two pipes or tubes of different diameters. These are mainly used to adapt different pipe size in a pipeline system. Pipe reducers can mainly be categorized in two types � concentric reducer and eccentric reducer. Our products have won approvals of major end users in India and overseas including oil and gas, power station, petrochemicals and shipbuilding industries. Standards: ANSI - B 16.9, ASME, API 590-605. Schedule: Sch 5 to Sch XXS. Sizes: 12"up to 36" Materials: Monel, Nickel, Inconel, Hastalloy, Titanium, Tantalum, Stainless Steel, Alloy Steel, Carbon Steel, Cupro-Nickel 9010 & 7030

Lap joint flanges are similar to other type of flanges, but it does not have a raised face. Lap joint flanges are used in conjunction with a "lap joint stub end". The total initial cost of a lap joint flange along with a stub end is around one third higher than that of comparable welding neck flanges. The pressure handling capacity of lap joint flange is cooperatively lower, and the fatigue life for the assembly is only one tenth that of welding neck flange. The lap joint flange with stub end assembly is used in piping systems which require regular dismantling for inspection and cleaning. These flanges slip over the pipe, and are not welded or otherwise fastened to it. Bolting pressure is transmitted to the gasket by the pressure of the flange against the back of the pipe stub end. Lap joint flanges are widely being used in shipbuilding, power generation, petrochemical plant, water treatment, dairy plant, pharmaceutical plant etc. Standards: asme b.16.5, asme b.16.47 (ab series), b16.48-api590, api 605, awwa c207, bs 10, din 2633, mss-sp-44. Classes: 150 lbs up to 2500 lbs sizes: 12"up to 36" (sizes over 36" available on request) materials: monel, nickel, inconel, hastalloy, titanium, tantalum, stainless steel, alloy steel, carbon steel, cupro-nickel 9010 & 7030 joint faces: rfrtjff

Apparatus international is a leading manufacturer and supplier of short radius and long radius elbows. We offer our materials with complete certifications and as per international standards. Our production range includes stainless steel elbows, carbon steel elbows, alloy steel elbows, and elbows in special alloys such as monel, inconel, hastealoy. We can manufacture elbows upto 48â�³ with wall thickness ranging from 1.5 mm thickness up to 40mm for varied sizes. An elbow is a pipe fitting which is used as a connection point between two lengths of pipes to produce a change in the direction of flow in the pipe, usually at an angle of 90â°, 45â° or 180â°. Elbows are also commonly referred as bends, and are available in a range of materials such as stainless steel, carbon steel, alloy steel, nickel alloys, duplex, and cupro nickel. Also known as 90â° bends, 90â° elbows are manufactured as sr (short radius) elbows and lr (long radius) elbows. 45â° elbows are typically made as lr (long radius) elbows. We are a high quality manufacturer and supplier of long radius elbows, short radius elbows, stainless steel elbows, duplex elbows, and carbon steel elbows as well as fabricated stainless steel elbows. We supply our products to customers in various industries including pharmaceutical, chemical, power, petrochemical, engineering and various other industries.

Normally referred as blanking flanges, blind flanges are widely used in high pressure applications. Blind flanges are generally used to seal the end of the piping system to prevent flow of fluid. The use of blind flanges allows easy of access to piping system once it has been closed. Blind flanges are widely being used in shipbuilding, power generation, petrochemical plant, water treatment, dairy plant, pharmaceutical plant etc. standards: asme b.16.5, asme b.16.47 (ab series), b16.48-api590, api 605, awwa c207, bs 10, din 2633, mss-sp-44. Classes: 150 lbs up to 2500 lbs sizes: 12"up to 36" (sizes over 36" available on request) materials: monel, nickel, inconel, hastalloy, titanium, tantalum, stainless steel, alloy steel, carbon steel, cupro-nickel 9010 & 7030 joint faces: rfrtjff