Vibratory Feeders Dealers in Dhansura, Sabarkantha

We are offering grizzly feeder is suitable to feed primary jaw crushers, selecting the large sizes which require primary crushing, the smaller sizes, and any fines which must be eventually rejected. Royal grizzly is used to transfer the large size materials and granular materials from hopper to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line. The grizzly vibro feeder consists of a very large vibrating body made of thick plate, with inside lining of anti-abrasive plate. The grizzly vibro feeder is driven by two or four vibrating motors. The vibro feeder which may either be placed on a steel or concrete base rests on springs. features : special design of grizzly bars eliminates material clogging and to better sizing effect four sets of load springs stand to better stabilize the operationco2 welded frame for better wear resistant adjustable bolted grizzly bars to meet specificspecial bar to prevent the block of raw material.

Vi bro feeder Size -10' x 3' (3000mm x 900 mm) fabricated eccentric shaft, use for primary jaw crusher

• Country of Origin: India
• Type: Vibrating Feeder
• Brand Name: R-TECHNO

Vibratory and Grizzly feeder

• VIBRATING GRIZZLY FEEDER TECHNICAL SIZE DETAILS: Vibrating Grizzly Feeder Size
• No. Of Decks: Screen Capacity TPH
• Screen Speed RPM: Drive HP
• Motor RPM: Model
• Feet:  
•  :  
•  :  
• AVGF-1800X900: 6’X 3’
• 1/2: 40 to 50
• 800/1050: 7.5
• 960: AVGF-2400X900
• 8’X 3’: 1/2
• 50 to 100: 800/1050
• 7.5: 960
• AVGF-2400X1200: 8’X 4’
• 1/2: 100 to 140
• 800/1050: 10
• 960: AVGF-3000X1200
• 10’X 4’: 1/2
• 150 to 180: 800/1050
• 10: 960
• AVGF-3600X900: 12’X3’
• 1/2: 180 to 190
• 800/1050: 15
• 960: AVGF-3600X1200
• 12’X 4’: 1/2
• 200 to 250: 800/1050
• 15: 960
• AVGF-4200X1200: 14’X 4’
• 1/2: 250 to 260
• 800/1050: 20
• 960: AVGF-4800X1200
• 16’X 4’: 1/2
• 380 to 300: 800/1050
• 20: 960

• Features: Special design of grizzly manganese bars eliminates Material clogging and to better sizing effect.

Manufacture different types of Feeders. Feeders are applied for both primary as well as secondary crushing stations. These feeders are used to regulate the feeding of the jawcone crusher, which enables smooth run of the crusher with high production rate. The Vibro feeders with Grizzly sections control the feed rate to the crusher by removing unnecessary material & bypassing the smaller material to the crusher for maximizing crushing capacity.

The  Vibro feeders are used for discharging , per-screening and feeding of an even volume of non- sticking ,bulk materials form a hopper or a soil into the crusher , grinding plant or screening equipment , converging transportation etc. The per-screening of the material takes place on a installed screening grate with the size up to 150m.m. The feeder is driven by two attached vibrating motor. To change the feeding amount, adjust the unbalanced weights of the vibrating motor or change the frequency by the frequency converter. vibration feeder – many advantages : Resistance against clogging and sticking of the screened material on the screening  grate The cascade design of the grate deck makes the screening of finer fraction more effective Minimum operation costs, which results form the balanced machine design, utilization of  many years of vibration feeder operation experience and unification of parts. Easy exchange of the armoring High quality=High affectivity + High economic operation. 

• Size (MM): 1000 x 3000
• Motor Power (HP): 6, 10
• Maximum Feed Capacity * TPH: 120

These feeders are used to regulate the feeding of the jawcone crusher, which enables smooth run of the crusher with high production rate. The Vibro feeders with Grizzly sections control the feed rate to the crusher by removing unnecessary material & bypassing the smaller material to the crusher for maximizing crushing capacity.