Outside Micrometers Dealers in Saharanpur

• Application: Industrial Use
• Feature: Accuracy, Durable
• Automation Grade: Automatic
• Brand Name: STIPL
• Material: Steel
• Measuring Range: 0-20mm With Dial Indicator With Resolution 0.01mm
• Standardisation: ISO 534, EN 20534 , SCAN P7 , TAPPI T 411
• Test Area: 2cm Square
• Steady Pressure: 1KG/cm Square
• Throat Depth: 75mm
• Lowering Speed: Fixed and Controlled

• Type: Manual
• Application: Industrial Use
• Frequency: 50Hz-65Hz
• Body Material: Aluminum, Plastic
• Power Source: Electric
• Feature: Accuracy, Lorawan Compatible
• Certificate: CE Certified
• Warranty: 1 Year

Superior quality Manual Thickness Micrometer is available from us. The Manual Thickness Micrometer has a manual hydraulic controlled dial type. The Manual Thickness Micrometer is used for lowering speed of the measuring spindle and is hydraulically controlled. The Manual Thickness Micrometer has a hardened and lapped measuring face. The Manual Thickness Micrometer is provided with dial type indicator. Resolution 0.001mm 0.01mm Applicable for Paper Packaging industries

• Body Material: Aluminum
• Color: BLUE
• Power Source: Electric
• Automation Grade: Semi Automatic
• Application: Industrial Use
• Feature: Durable, Low Power Comsumption
• Certificate: CE Certified, ISO9001:2008
• Type: Micrometer
• Frequency: 50Hz-65Hz
• Country of Origin: India

• Brand Name: Advancetech

The instrument has a castled stand and having two parallel, plane circular faces between which the test piece is placed for measurement. One of the faces (the anvil).In the measuring spindle there is a stationary lower measuring area of 200 mm2. The movable measuring area is fixed on a bar, which also supports the dead weight load. The pressure between the two faces is 100 kPa + 10 kPa. The measuring indicator is located on the top of the bar is connected with optical transducer.Details : The bar is lifted and lowered by electrical motor. When you push the button on the side of the instrument, the bar with the movable measuring area is lifted with a specified speed. The speed at which the pressure foot is lowered is controlled automatically and adjusted to 4.0 mm/s + 0.2 mm/s. Make a few lifting of the upper measuring area and check the zero position. Adjust the zero. Now the instrument is ready for use. A set of thickness filler guagues, with two value for 0.150 and another 802 ± 2 micron to be used for calibration.