Back Back
Vickers Hardness Testing Machine
A precision Diamond Indentor (136° pyramid) is used to make sharp indentations on the specimens samples, Maximum Test height x Throat : 115 x 70 mm, Load accuracy well within ± 1% of nominal load value. Machine conforms to IS:1754, Computerized model is available .Computerized model has built in CCD and suitable advanced software. Hardness will be displayed on computer monitor automatically. Results printout can be taken, Extra (Optional) accessories like – Knoop Indentor, Knoop test block, Precision vice, Thin specimen holding device, V-shape anvil, Vertical & Horizontal fine specimen holding device, Rotary table, etc. are available.
...more
Universal Testing Machines
We are offering universal testing machines. Analogue – universal testing machines ( model : tun ) • variety of tests like tension,compression,tranverse, etc. Are conducted. • continuous roll autographic “load vs elongation” recorder. • suitable for testing a wide range of metallic materials. • extra (optional) accessories such as – mechanical extensometer, load-stabilizer, attachments for brinell test, tensile test for shouldered & threaded, single & double shear test, bolts-nuts & washer test, rope test, flat belt test, bend-rebend test, 180° bend test, pull-out test, etc. Are available. • capacities from 100 kn to 2000 kn. • various analogue models - tun-100, tun-200, tun-400, tun-600, tun-1000 & tun-2000. • loading accuracy well within ±1%, conforms to is:1828 bs:1610.
...more
torsion tester
Tensile Testing Machine
We are offering tensile testing machine. Analogue – tensile testing machines ( model : tkg ) • variety of tests like tension, compression, cross breaking bending, shear, linear bonding gripping peeling strength of adhesives & tapes, etc. Are conducted. • suitable for testing a wide range of materials like rubber, wood, plywood, plastic, rexins, ceramics, teflon, cardboard, latex, composites, ferrous metals, non-ferrous metals,etc. Of various forms like round, flat, thread, wires, dumbells, fabric, belts, strips, ropes, etc. • wide range of grips, attachments & special fixtures are available to suit variety of material and shapes. • continuous roll autographic “load vs elongation” recorder. • elongation scale with least count 1 mm. • three measuring ranges for accurate testing. • a number of straining speeds are available for proper selection. • machine with ac or dc drive motor is available. • various models – maximum capacity from 200 n to 50 kn. • loading accuracy well within ±1%, conforms to is:1828 bs:1610. • hand operated cutting press with different sizes dies are available for cutting dumbbell specimen.
...more
Tensile Tester
plywood testing machine
Elongation scale with least count 1 mm, Three measuring ranges for accurate testing, A number of straining speeds are available for proper selection, Machine with AC or DC drive motor is available, Various Models – Maximum Capacity from 200 N to 50 kN, Loading accuracy well within ±1%, conforms to IS:1828 BS:1610, Hand operated cutting press with different sizes dies are available for cutting dumbbell specimen.
...more
Pendulum Impact Testing Machine
Suitable for Charpy & Izod Impact tests on various materials. Works on Pendulum principle, Rigid designs of machine frame & other parts assure minimum energy absorption during fracture which results in improved test accuracies, Direct indication of Impact energy absorbed by specimen on large dial for Models :AIT-300-N, AIT-300-EN & on digital panel display for Model : AIT-300-D.
...more
MICRO VICKERS HARDNESS TESTING MACHINES
We offer Micro Vickers Hardness Testing Machines. MICRO VICKERS HARDNESS TESTING MACHINES ( Model : FMV-1 ) • Suitable for finish components like thin sheets, fine wires, etc. Watch parts like springs, pivot bearings, gears, cutting edge of Razor blades, drills, file teeth, etc. Metallic foils, surgical needles, pen points & so on. • To determine hardness on - surface coatings (like electroplating, etc.), extremely thin case hardened parts, anodized castings of alluminium, shot blasted or rolled faces, etc. • A range of test loads can be used to suit particular application. Test loads from 10 grams to 1000 grams. • Magnifications - 125X, 250X & 625X available. • X-Y stage is provided with least count of 0.01mm, which can move the job as per the requirements. • A precision Diamond Indentor (136° pyramid) is used to make sharp indentations on the specimens samples. • Maximum Test height x Throat : 115 x 70 mm. • Load accuracy well within ± 1% of nominal load value. Machine conforms to IS:1754. • Computerized model is available .Computerized model has built in CCD and suitable advanced software. Hardness will be displayed on computer monitor automatically. Results printout can be taken. • Extra (Optional) accessories like – Knoop Indentor, Knoop test block, Precision vice, Thin specimen holding device, V-shape anvil, Vertical & Horizontal fine specimen holding device, Rotary table, etc. Are available
...more
Mechanical Extensometer
We are offering mechanical extensometer. Mechanical extensometer (model fxt-3) • it is an attachment to universal testing machine and tensile testing machines, used to find out the proof stress at the required elongation percentage. • it measures the elongation of a test piece on load for the set gauge length. • least count of measurement 0.01 mm and maximum elongation measured upto 3 mm. • adjustable gauge length from 30 mm to 120 mm • round specimen from 1 mm to 20 mm dia and flat specimen from 1 mm to 20 mm thickness can be accommodated. technical specifications – for mechanical extensometer (model : fxt - 3) measuring range 0 - 3 mm least count 0.01 mm gauge length adjustable from 30 - 120 mm ( 30 - 70 mm can also be given ) specimen size
...more
material testing machines like tensile tester
LEAF SPRING TESTING MACHINES
We offer Leaf Spring Testing Machines. LEAF SPRING TESTING MACHINES ( Model : FST, FST-E, FST-EC ) • The machine is used to test wide range of Leaf Laminated Springs for load rate as per IS:1135-1984. • Measuring ranges available with auto load selection facility. • Large size table for wide range of springs with motorized rapid adjustment of test height. • Standard autographic recorder. • Over load & Over travel safety provisions. • Facility of Compression, Shear, Brinell & Bending test with extra accessories. • Load stabilizer (Optional) is an extra attachment used to maintain a desired load constant at specific deflection enabling measuring it easily & accurately. • We can also supply machines for Helical compression springs & Disc springs. • Various Models – Maximum Capacity from 100 kN to 500 kN. • Loading accuracy well within ±1%, conforms to IS:1828 BS:1610. • Analogue, Digital & Computerized versions are available.
...more
Leaf Spring Testing Machine
The machine is used to test wide range of Leaf Laminated Springs for load rate as per IS:1135-1984, Measuring ranges available with auto load selection facility, Large size table for wide range of springs with motorized rapid adjustment of test height, Facility of Compression, Shear, Brinell & Bending test with extra accessories, Load stabilizer (Optional) is an extra attachment used to maintain a desired load constant at specific deflection enabling measuring it easily & accurately.
...more
HORIZONTAL CHAIN AND WIRE ROPE TESTING MACHINES
We offer Horizontal Chain and Wire Rope Testing Machines. HORIZONTAL CHAIN AND WIRE ROPE TESTING MACHINES (Model : FCR, FCR-E FCR-EC) • Machines are designed to test chains, wire ropes & any long specimens for proof test or destructive tensile test. • High loading accuracy & infinitely variable straining speeds to suit a wide range of materials. • Continuous roll autographic recorder to get load - elongation graph. • Robust loading frame, Simple controls & easy to operate. • Adequate safety devices for safe operation. • Analogue models with large dial & load measurement by pendulum dynamometer principle. • Digital Computerized models are also available where load Vs elongation is in digital display & printout of results can be taken. • Special Accessories like - Extra Bed length, Extra Ram stroke, Various special grips attachments fixtures as per sizes shapes of specimens, Load-stabilizer (at extra cost) can be provided to suit special application. • Various Models – Maximum Capacity from 100 kN to 3000 kN. • Loading accuracy well within ±1%, conforms to IS:1828 BS:1610.
...more
Fatigue Testing Machine
This machine is light, compact and simple design used to test the fatigue strength of materials and draw S-N diagram used for research institutes, laboratories, material manufacturer and various industries, Table model, no need of foundation, This is a rotating beam type machine in which load is applied in reversed bending fashion, The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.
...more
Electronic Extensometer
In case of many brittle materials such as high carbon steels, alloy steels, light aluminium & magnesium alloys, it is difficult to get yield values. For such materials stress corresponding to a certain allowable amount of plastic deformation is termed as proof stress say 0.1% or 0.2% proof stress, The measuring range is upto 5mm & resolution is 0.001mm, Standard two fixed gauge lengths of 25 & 50 mm is provided. Different sizes gauge lengths can also be given at an additional cost, If this extensometer is ordered with a computerized UTM, then a special menu driven application software is provided, which accepts load & extension values, & evaluates proof stress values, The measurement accuracy satisfies all requirements of class-I as per IS:12872-1990.
...more
Digital Torsion Testing Machine
Measurement of Angle of Twist by Rotary Encoder, Display of Torque and Angle of twist on LCD display provided on Data Acquisition System, Facility for connecting the DAS Panel to PC, Accuracy of torque measurement ± 1% in the range from 4% to 100% of machine capacity.
...more
Digital Rockwell Hardness Testing Machine
This machine is designed for measuring hardness of metals & alloys of all kinds, hard or soft, whether round, flat or irregular in shapes. , Semi-automatic, motorized, digital, microprocessor based panel. We can get hardness in digital version, Centronics parallel port for connecting dot matrix printer, Three modes of operation viz. Motorized automatic mode, Motorized mode & Manual mode, Automatic weight selection by thumb wheel, Test height x Throat is – 295 x 148 mm, Machines strictly conforms to IS:1586 2281, BS: 240, ASTM-E-10.
...more
Digital Fatigue Testing Machine
This machine is light, compact and simple design used to test the fatigue strength of materials and draw S-N diagram used for research institutes, laboratories, material manufacturer and various industries, This is a rotating beam type machine in which load is applied in reversed bending fashion, The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment, The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.
...more
Computerized Tensile Testing Machine
The machine is having 2 frames and one frame is used for Tensile Test and Compression and other frame is exclusively designed for bend test on insulators, Special window based software is provided to meet the special test conditions. The on-line graph, data acquisition, storage and calculations etc, We have supplied Special Computerized Spring Testing Machine for checking deflection of leaf springs to , We have developed Microprocessor based panels for Rockwell and Balancing Machines. We have developed Portable Dynamic Hardness Tester Model:DHT-6 which is lighter in weight, easy to operate, and the machine is first of its kind in India.
...more
AUTOMATIC OPTICAL BRINELL HARDNESS TESTERS
We offer Automatic Optical Brinell Hardness Testers. AUTOMATIC OPTICAL BRINELL HARDNESS TESTERS (Model : OPFA-3000, OPFA-3000-PC) • The machine has a robust,C-type load frame & has been designed for production testing of cast or forged components like leaf springs, cam shafts, etc. For Brinell hardness value. This machine is suitable for foundries, engineering industry on production line. • Since most of the operations are fast and automatic, the test speed is high with less operator fatigue. • The cycle time (except loading unloading) is about 12 seconds per test. • Load stages – 750 kgf and 3000 kgf. • Optical measuring equipment with 14 X magnification. • Job loading unloading, push button operation, pushing cycle start, de-clamp buttons are only manual operations & rest all is automatic. • A push button is pressed for cycle start & hydraulic operations. After cycle time, impression is visible on screen, which (Diameter) is to be measured with the help of microscope of least count 0.01mm. • Computerized model is available .Computerized model has built in CCD and suitable advanced software. Hardness will be displayed on computer monitor automatically. Results printout can be taken. • Accuracy conforming to IS:2281.
...more
Automatic Brinell Hardness Testing Machine
ANALOGUE COMPRESSION TESTING MACHINES
we offer analogue compression testing machines. analogue compression testing machines ( model : fct, fct-e, fct-ec ) • suitable for testing a wide range of materials. • wide range of standard & special (optional) accessories such as – load-stabilizer, attachments for brinell test, etc. are available. • various models – maximum capacity from 100 kn to 3000 kn. • loading accuracy well within ±1%, conforms to is:1828 bs:1610. • analogue, digital & computerized versions are available.
...more
balancing machines
Fatigue Tester
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from FINE SPAVY ASSOCIATES & ENGINEERS PVT. L
Post Free Ad