Heat Apparatus Dealers in Sangli

FEATURES: 1. Study of the connected of double & single lagging 2. Study of effects of different insulating material combinations3. Electrical input control & measurement with complete penalized instruments.4. Digital Temperature indicator. INTRODUCITON:Lagging of pipes is required to prevent leakages of heat. The Apparatus is designed to study the lagging phenomenon. In Lagged Pipe Apparatus three concentric pipes are arranged between the pipes are filled compactly by two different insulating materials and heater is provided at the center of inner pipe. Temperature at various points is measured with Temperature indicator. Heat input is measured by Voltmeter - Ammeter. The assembly is mounted o angle frame. SPECIFICATION: 1)  Pipesi)    M.S. Pipe inside - 5cm dia. Approx   ii)   M.S. Pipe Middle - 10 cm dia approx.iii)  M.S. Pipe Outer - 15cm 2) Length of Pipes -1m approx.Control Panel consisting of a)  Voltmeter - 0 - 100/200 volts.b)  Ammeter - 0 - 2 Amp.c)  Diammerstat for heater, 0-230 V, 2 Amps.d)  Digital Temperature indicator, 0-300 0 C with 10 C least count, using chromel-almel  thermocouples, provided with cold junction compensation.4)   Nichrome cartridge heater of suitable capacity  and length EXPERIMENTATION: 1)   To determine heat flow rate through lagged pipe and compare it with the heater input for known values of thermal conductivity of lagging material.2)   To determine thermal conductivity of lagging material by assuming input to be heat flow rate 3) To plot temperature distribution across lagging material. SERVICE REQUIRED : 1)  To determine heat flow rate through lagged pipe and compare it with the heater input for known values of thermal conductivity of lagging material.2)  To determine thermal conductivity of lagging material by assuming input to be heat flow rate 3) To plot temperature distribution across lagging material. Almost  care is taken for preparing this literature, but still if there are any mistakes,  those may be excused.  We reserve our right to change or modify the equipment without notice.

Range of Experiments to be Carried Out• To determine the critical heat flux at different bath temperatures• To plot the graph of Critical Heat Flux with rescpective Bath Temperature

With us, clients can stay rest assured for the security of the payment. For the convenience of the clients, we accept cash payments along with bank transfers. In order to ensure zero damage during transit, we have adopted modern facility for meticulously packaging our offerings. And, we also ensure that the used material is of high quality.

• Features: Highly demanded, Superlative performance, Quality product

Critical Heat Flux Apparatus MICROTECH apparatus consists of a nichrome wire immersed in water. The nichrome wire is heated by passing current through it. Input to nichrome wire is controlled by a dimmer stat. As one goes on increasing wire input current increases and at critical heat flux the wire brakes, which is measured on the meter. A magnifying glass & a lamp is provided to visualize natural convection and pool boiling also.

Heat transfer apparatus, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

Critical Heat Flux Apparatus, Rope Brake Dynamometer

Heat Transfer From Pin Fin, Losses in Pipes Apparatus, laminar flow apparatus