M/s Hindustan Nylons. Miraj, Sangli, Maharashtra

Hindustan Nylons manufactures Trexonn Brand Machine Tool Slideway Liners. Trexonn Slideway Liner basically consists of Liner fixed on sliding part of machine Slideway for antifriction, vibration dampening purpose. Standard Sizes: 1, 1.5, 2, 2.5 & 3 mm Thickness, 305 mm Width in Roll form. Non-standard Sizes: Trexonn Machine Tool Slideway Liners can be manufactured in Non-standard sizes on request, subject to minimum order quantity.

Hindustan Nylons manufactures sterling brand un-sintered PTFE Thread Seal Tape in variety of Models & sizes: Model: Premium Size: 121925mm W X 0.075mm Thk X 12 Mtr L Density (gmcc): 1.00 Service Conditions: High Pressure → 250 kgcm² - 250°C Applications: Hydraulic, Petroleum, Petrochemicals, Gaseous, Space, Nuclear Model: Standard Size: 121925mm W X 0.075mm Thk X 10 Mtr L Density (gmcc): 0.75 Service Conditions: Medium Pressure → 100 kgcm² - 200°C Applications: Pharma, Pneumatic, Food & Beverages Model: General Size: 121925mm W X 0.075mm Thk X 10 Mtr L Density (gmcc): 0.25 Service Conditions: Low Pressure → 1 kgcm² - 50°C Applications: Domestic Water Sterling PTFE Thread Seal Tape can be manufactured in non-standard sizes quality as per customers' specification. Sterling Un-sintered PTFE Thread Seal Tape are manufactured & available as per variety of grades in specifications within BS-4375 replaced by BS-7786, ASTM-D-6585, MIL-T-27730 replaced by MIL-A-A58092, AS-1272 & IS-14635 based on customers' instructions

Style No: HN-777 Ideal For: Universal packing for High Temperature - Aggressive or Abrasive or Viscous chemicals Properties: Good chemical resistance, inert to most media Low startup friction High Density Good Dimensional Stability Good Heat dissipation properties Self Lubrication Low coefficient of friction Suitable to food contact application Low Shaft wear No Jamming on shaft, lower shaft erosion Very High Temperature Resistance No Heat Buildup, last Resistance to Abrasive Erosion media Excellent volume stability Service Conditions: Temp (°C): -100~650 Pressure (kgcm²): 35P, 150R, 350V pH Range: 0-14 Speed (ms): 25P, 2R Not Recommended For: Fluorine, Fluorine complexes, Alkali Metals, Nitric Acid, Oxygen & Oxidizing Agents Service Medium: Non Drinking Water Sea Water Ash Water Soiled Water Mud Paints & Dyes Adhesives Petrolium Tar Bitumen Sewage Abhrasive Slurry Paper Pulp Oils & Greases Mineral Oil Agreesive Chemicals Forms: Square section, Ring & Rope form Sizes Available: 3~25mm Packing Size: 1~10 kg depending upon size P=Pump, R=Reciprocating, V=Valves

Good chemical resistance, inert to most media Soft & Resilient Self LubricationLow coefficient of friction High Temperature ResistanceTemp (°C): -240 to +260 Pressure (kgcm²): 200 PH Range: 0~14

Style No: HN-111 Ideal For: Static Seal for Valves & Gasketing Properties: Good chemical resistance, inert to most media Soft & Resilient Self Lubrication Low coefficient of friction High Temperature Resistance Service Conditions: Temp (°C): -100~260 Pressure (kgcm²): 20P, 50R, 100V PH Range: 0-14 Speed (ms): 4P, 1R Not Recommended For: Fluorine, Fluorine complexes & Alkali Metals Service Medium: Non Drinking Water Chilled Water Warm Water Hot Water Mild Acids & Alkalies Paints & Dyes Adhesives Petroluum Paper Pulp Oils & Greases Mineral Oil Forms: Round Square Section, Rope form Sizes Available: 3mm ~ 25mm Packing Size: 5m ~ 30m P=Pump, R=Reciprocating, V=Valves

Hindustan Nylons manufactures PTFE Wear Strips Bands. PTFE Wear Strips Bands are manufactured in Virgin PTFE, Chemically Modified PTFE, Carbon Filled PTFE, Bronze Filled PTFE & other filled grades of PTFE.

Hindustan Nylons manufactures Ram Extruded PTFE Rods in variety of standard sizes. Diameter: 5mm - 100mm Length: 900mm 1000mm 2000mm PTFE Rods - Ram Extruded - are available in Standard grades in Virgin Conventional PTFE & Virgin Chemically Modified PTFE End Use: As insulation parts in Electrical & Electronic applications.

Hindustan Nylons manufactures Ram Extruded PTFE Pipes in variety of standard sizes. Diameter: Up to 100mm Length: Up to 3300mm PTFE Pipe - Ram Extruded - are available in Standard grades such as Virgin Conventional PTFE & Virgin Chemically Modified PTFE End Use: For transporting aggressive chemicals, Petroleum products, Adhesives, Pharmaceuticals, Medicines

Hindustan Nylons manufactures Paste Extruded PTFE Tubings - in variety of standard sizes. Wall Thickness: 0.8, 1, 1.5, From 1.6 mm ID, up to 25 mm ID End Use: For transporting aggressive chemicals, Petroleum products, Adhesives, Pharmaceuticals, Medical Instruments.

Hindustan Nylons manufactures Molded PTFE Rods in variety of standard sizes. Diameter: 25mm - 500mm Length: 300mm. PTFE Rods - Molded are manufactured in Virgin & Filled Grades of PTFE Filled Grades: Standard Filled Compositions: 1525% Glass Filled TFE-M. 2535% Carbon Filled TFE-M. 15% Graphite Filled TFE-M. 40 60% Bronze Filled TFE-M. 55% Bronze + 5% MoS2 Filled TFE-M. 15% Glass + 5% MoS2 Filled TFE-M. TFE-M Components can be available in Non standard - customer specific composition, subject to minimum order quantity TFE-M Component can be available with Sodium Itching Chemical Treatment, subject to minimum order quantity.

Hindustan Nylons manufactures Molded PTFE Bush in variety of standard sizes. Outer Diameter: Up to 500mm Length: Up to 1000mm PTFE Bush - Molded are manufactured in Virgin & Filled Grades of PTFE End Use: For making BV, BFV, PGV components for chemical & pharmaceutical applications Filled Grades: Standard Filled Compositions: 1525% Glass Filled TFE-M. 2535% Carbon Filled TFE-M. 15% Graphite Filled TFE-M. 40 60% Bronze Filled TFE-M. 55% Bronze + 5% MoS2 Filled TFE-M. 15% Glass + 5% MoS2 Filled TFE-M. TFE-M Components can be available in Non standard - customer specific composition, subject to minimum order quantity TFE-M Component can be available with Sodium Itching Chemical Treatment, subject to minimum order quantity.

Hindustan Nylons manufactures PTFE & Filled PTFE Machined Components such as PTFE Balls, PTFE 'O' Rings, PTFE Chevron Packings, PTFE D-Rings etc as per Customers specification & Drawings. Size: upto 1000mm Diameter & 1000mm L PTFE Machined Components can be manufactured as per Customer specific sizes subject to minimum order quantity

Style No: HN-666 Ideal For: Universal packing for Low friction applications for Aggressive chemicals & Corrosive Gases Properties: Good chemical resistance, inert to most media Low startup friction Good Dimensional Stability Good Heat dissipation properties Soft & Resilient Self Lubrication Low coefficient of friction Low Shaft wear No Jamming on shaft, lower shaft erosion High Temperature Resistance Excellent volume stability Service Conditions: Temp (°C): -200~260 Pressure (kgcm²): 20P, 100R, 250V pH Range: 0-14 Speed (ms): 25P, 3R Not Recommended For: Fluorine, Fluorine complexes, Alkali Metals, Nitric Acid, Oxygen & Oxidizing Agents Service Medium: Non Drinking Water Chilled Water Warm Water Hot Water Steam Water Mild Acids & Alkalies Petroluum Liquor & Alcohol Paper Pulp Oils & Greases Mineral Oil Agreesive Chemicals Forms: Square section, Ring & Rope form Sizes Available: 3~25mm Packing Size: 1~10 kg depending upon size P=Pump, R=Reciprocating, V=Valves

Hindustan Nylons manufactures PTFE Gaskets as per variety of standards such as ASA, DIN, BS etc for raised face & full face flanged joints. PTFE Gaskets are produced in various types such as Slit type Envelop Gaskets, Milled type Envelop Gaskets & Ready Cut Solid Gaskets. Diameter: Upto 1000 NB Thickness: 0.5+0.5, 0.5 + Gap + 0.5, 1.5, 2, 3mm PTFE Gaskets can be manufactured as per Customer specific sizes subject to minimum order quantity

Hindustan Nylons manufactures Paste Extruded PTFE Tubings - in variety of standard sizes. Wall Thickness: 0.8, 1, 1.5, From 1.6 mm ID, up to 25 mm ID End Use: For transporting aggressive chemicals, Petroleum products, Adhesives, Pharmaceuticals, Medical Instruments.

Hindustan Nylons manufactures PTFE Diaphragms - plain, bonded to Rubber Cushioned by Rubber for Diaphragm Valves, Diaphragm Pumps.PTFE Diaphragm are manufactured in Virgin PTFE, Chemically Modified PTFE Auntistatic PTFE & conductive PTFE depending upon service conditions & application.

Hindustan Nylons manufactures PTFE Valve Components such as:- Ball Valve Seals & Seats, Butterfly Valve Seats & Liners, Plug Valve Sleeves in variety of Grades such as:- Virgin PTFE, Modified PTFE, Filled Grades of PTFE.

Length : upto 1000mm

Hindustan Nylons manufactures PTFE Bridge Bearing Pads as per Indian Standard: Code IRC-83 with one side dimpled for lubricant holding & other side - Sodium Itched - for Gluing. Size: upto 1000mm Square or Circular Thickness: 3mm ~ 6mm PTFE Bridge Bearing Pads can be manufactured as per Customer specific sizes subject to minimum order quantity

Style No: HN-333 Ideal For: Universal packing for Medical, Juices, Pharmaceutical, Liquor & Alcohol, Food Stuff Application (FDA component) Properties: Good chemical resistance, inert to most media Good Dimensional Stability Soft & Resilient High Density Self Lubrication Low coefficient of friction Suitable to food contact application High Temperature Resistance Excellent volume stability Suitable to Medical Pharmaceutical Applications Low Permeability Service Conditions: Temp (°C): -200~260 Pressure (kgcm²): 50P, 150R, 250V PH Range: 0-14 Speed (Ms): 5P, 1R Not Recommended For: Fluorine, Fluorine complexes & Alkali Metals Service Medium: Drinking Water Liquor & Alcohol Juice Pharmaceauticals Food Stuff Medical Forms: Square section, Ring & Rope form Sizes Available: 3~25mm Packing Size: 1~10 kg depending upon size P=Pump, R=Reciprocating, V=Valves

Style No: HN-222 Ideal For: Low cost, Universal packing for Water, Gas, Mild Chemicals Properties: Good chemical resistance, inert to most media Good Dimensional Stability Soft & Resilient Self Lubrication Low coefficient of friction High Temperature Resistance Service Conditions: Temp (°C): -200~260 Pressure (kgcm²): 20P, 100R, 250V PH Range: 0-14 Speed (Ms): 10P, 1R Not Recommended For: Fluorine, Fluorine complexes & Alkali Metals Service Medium: Drinking Water Non Drinking Water Chilled Water Warm Water Hot Water Steam Water, Steam & Vapous Mild Chemicals Gaseons Environment Paints & Dyes Adhesives Petroluum Liquor & Alcohol Paper Pulp Oils & Greases Mineral Oil Forms: Square Section, Ring & Rope form Sizes Available: 3mm ~ 25mm Packing Size: 1kg ~ 10kg depending upon size P=Pump, R=Reciprocating, V=Valves

Hindustan Nylons manufactures PTFE Bellows Expansion Joints from full vacuum up to high pressure (10 kgcm²) application with accessories such as internal sleeve, external ring, connection Rods, Connection Flanges etc. Diameter: 25mm ID ~ 600mm ID Length: upto 300mm PTFE Bellows Expansion Joints can be manufactured as per Customer specific sizes subject to minimum order quantity

Hindustan Nylons manufactures PTFE Balls PTFE Spheres in variety of Grades such as Virgin PTFE, Chemically Modified PTFE, Carbon Filled PTFE, Glass Filled PTFE, Bronze Filled PTFE & other filled grades of PTFE.

Hindustan Nylons manufactures Sterling Brand Non Asbestos packings in variety of styles & sizes for Sealing & Gasketing of static, Rotary & Reciprocating Joints.

Good chemical resistance, inert to most media Low startup friction Good Dimensional Stability Good Heat dissipation properties Soft & Resilient Self Lubrication Low coefficient of friction Low Shaft wear No Jamming on shaft, lower shaft erosion High Temperature Resistance Excellent volume stability Temp (°C): -240~300 Pressure (kgcm²): 25P, 250R, 250V pH Range: 0-14 Speed (ms): 20P, 3R