Protective Relays Dealers in Sangli

We are offering protection relay. Electric motors are crucial component in virtually every industrial automation application or environment. Therefore optimizing their performance and reliability can play a major role in reducing costs and improving overall plant efficiency. Electric motors fail and about half of them fail because of overheating through overload, phase failure or insulation breakdown. There are wide ranges of motors and motor characteristics in existence, because of numerous duties for which they are used and all of them need protection. Fortunately, the more fundamental problems affecting the choice of protection are independent on the type of motor and the type of load to which it is connected. Motor characteristics must be carefully considered when applying protection. It is emphasized because it applies more to motor than other items of power system plant. Protection of motor exists in any form, a variety of designs & either packaged individually or in different combinations. The fundamental and basic aim should be permit the motor to operate up to, but not to exceed its thermal and mechanical limits for overloads and abnormal operation conditions and to provide maximum sensitivity to faults.

• Size: Facia 70 (H) X 60 (W) mm, Depth 110 mm
• Enclosure: Din rail mounting ABS Plastic
• Auxlliary Supply: 415 VAC or 230 VAC 50 Hz
• Input: From two CTS / 5 Amps
• Output: Potential Free Contact (5 Amps at 230 VAC)
• LED Indications: One For power on and second for Tripped condition

  This is a Current Sensing SPP, senses the current from the two phases and if current in any one of the three phases is absent, it operates the relay.This is perfectly suitable for the protection of the three phase motor.It Automatically resets when the fault condition is gone. LED Indicator for Power & Trip Auxiliary Supply : 230 VAC +/- 10% Input from 3 CTs of secondary rating 5A from each Phase Current Sensing operation Reset switch is provided to reset after tripping Output relay contact rating : 5A at 230V AC Field proven design Enclosure : Din Rail Mounting Size : 60 X 70 X 110 mm

We are one of the most trusted Manufacturers and Suppliers of excellent quality Power Protection Relay. Available in varying specifications, our Power Protection Relay is manufactured using high grade material and components. Our Power Protection Relay works efficiently at different voltage ranges. We offer Power Protection Relay at market leading prices.Attributes : Excellent network stability Superior quality Reasonable price Manufactured from high grade raw material

• Brand Name: SYCON

We are offering intelligent motor protection relay. General features:- â· advance micro controller based state-of-art technology. · selectable inverse time curves. · protection against â· unbalance â· single phasing â· reverse phasing â· overload â· stalling over load characteristics select either inverse time characteristics or definite time characteristics overload setting :-30 % to 110% tripping time :-inverse time : as per thermal curve :-definite time: (0 to 30 sec) under current :-20%-50 %, tripping time: 30 sec motor stall :-200-600 %, tripping time 30 â�� 300 sec earth fault :-1 a- 3 a, tripping time: 1 sec -20 sec unbalance :-25-100 %, inverse phase failure :-tripping time: 5 sec reverse phase :-tripping time: 0.1 sec motor start time :-0-10 sec reset :-manual reset â· undercurrent â· earth fault â· common tripping for all protective function. · thermal overload protection. · alarm for tripping. · ultra compact size. electrical specifications ct input :-5, 15va auxiliary supply :-440v ac â±15% frequency :-50 hz â± 5% ac burden :-10 va at rated current relay output :-10amp at 250v mechanical specification :- mounting type : wall mounting panel mounting size : 144mm x 144mm x 110mm (wxhxd) panel mounting 115mm x 115mm x 75mm (wxhxd) wall mounting.