Electronic Panel Dealers

• Material: Mild Steel
• Color: White
• Power: 9-12kw
• Power Source: Electric
• Application: Control Panel
• Voltage: 440V
• Autoamatic Grade: Semi Automatic
• Type: Electronic Panel
• Phase: Three Phase
• Warranty: 1 Yr
• Country of Origin: India

Buyers can place bulk or retail orders with us all year round and expect on time delivery of consignments. Our well-structured warehouse is properly managed and maintained by our adroit professionals. Moreover, we keep on updating the unit for better safety.   Provides : Electronic Fully Automatic Star-Delta Starter. Input Supply By Mcb/Mccb, Digital 4" Square Volt/Ammeter, Selector Switch Cts, Indicator Lamps Automatic Motor Protector. Note: Bus Bar System Will Be 15% Extra On Above Rates Up To 7.5 Hp 08 To 15 Hp 16 To 20 Hp 21 To 30 Hp 31 To 50 Hp 51 To 75 Hp Empp Empp-2 Empp-4 Empp-6 Empp-8 Empp-10.

We offer highly efficient Electronic Process Control Panels and distribution board which come in enclosed chambers. The entire fabrication is done using superior materials and technologies. Electronic Process Control Panels have automatic operations, are quite easy to assemble or dissemble. Electronic Process Control Panels are high on demand in the electronic as well as electrical industry. Our Electronic Process Control Panels are used in making cabinets and safety fuses.

We are situated in Vadodara(India) and we have a well-developed network that assists us in reaching any destination. Electronic Panels are mainly used in electronic devices and power control centers. We are capable of make on-time deliveries of the product range that we keep safe in our massive warehouse.

• Country of Origin: India
• Type: Electronic Panel
• Application: Control Panel
• Color: White
• Power Source: Electric
• Autoamatic Grade: Automatic

We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distributi Renowned for our outstanding patron care support, we have become a distinguished supplier of Electronic Control Panel in the market.

• Type: Amf Panel
• Material: Metal
• Country of Origin: India
• Feature: Rugged design, Easy installation, Optimum functionality
• Application: Industrial
• Condition: New

RESWEDL Electronic Control Panels are custom designed to suit various requirements. Features Fully solid state circuitry ensures reliability and long life. Moduler construction with plug-in system of modules enable quick changing of defective modules which minimizes machine breakdown duration. Each module is provided with self-diagonising LED indicators. This enables fault detection without specially trained personnel. Welder Control Panels are provided with high power thyristors for primary switching. This type of switching without any moving parts gives extremely long life due to no wear and tear. Thyristors firing is by means of phase shifted firing palse to get precise and infinitely variable current control. Programmable control panels incorporating the latest micro-processor systems are also available

• Phase: Three Phase
• Brand Name: Volt-on
• Operating Voltage: 440V
• Dimension: As per Designing
• Automation Grade: Automatic
• Usage: Industrial
• Capacity: As per Customer Requirement

• Application: Industrial
• Weight: 100-1000kg
• Feature: Durability, High Strength, Long Functional Life
• Power: 0-25Bhp, 25-50Bhp
• Driven Type: Electric
• Automation Grade: Automatic

We are involved in offering a wide collection of Electronics Control Panel to our esteemed customers. These provided products are developed using optimum grade inputs and state-of-the-art technology in tandem with market set standards and guidelines. Apart from this, these offered products are obtainable at very inexpensive prices.Features: Microprocessor / computer controlled operation. Weighing of aggregate, cement, sand, water, admixture. Setting of weight in coares and fine steps. Weighing can be either in common hopper or separate for each type. User programmable preceipes upto 99 Nos. (standard 10). Computer screen shows complete batch information either on same screen or page wise format can be provided. Messages on screen give process status instantaneously if feedback system is incorporated in the plant. Facility to program in flight correction factor operating modes. Printer gives complete record in user definable format. Other features may be specified by user.

• Application: Industrial
• Application: Control Panel
• Voltage: 110V, 220V, 440V
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 5 Yrs
• Autoamatic Grade: Automatic

The company is ranked amidst one of the topmost Manufacturers and Suppliers of Electronic Based Control Panels based in India. Designed to precision, the Electronic Based Control Panels that we offer can automatically control the diesel to start and stop. Conforming to international standards, these Electronic Based Control Panels accept digital inputs through the generator and start remotely. Additionally, we provide the Electronic Based Control Panels in diverse specifications, in order to meet the client�s requirements.

Buy high performance and reliable Electronic Control Panel from us at market leadi9ng prices. Our company is one of the eminent Manufacturers and Suppliers of Electronic Control Panels in Jalandhar, Punjab, India. Available in various configurations, our Electronic Control Panels require low maintenance, as they are fabricated from sturdy materials. They are capable handling multiple connections at the same time. We offer them in bulk and provide individually tailored Electronic Control Panels for buyers.

Salient Features Switch ON & OFF automtically Dry run and over load Protection Digital Display for Amps & Voltage read out User programmable Amps control Auto / Manual option Float Control Option Dry run Programmable Timer

• Phase: Single Phase
• Material: Sheet metal, Stainless steel
• Material: Mild Steel sheet
• Brand Name: Autocon
• Usage: Submersible Pump
• IP Rating: IP40

• Type: Electronic Panel
• Material: ABS, Aluminum, Mild Steel, PVC
• Application: Industrial
• Application: Control Panel
• Color: Brown, Grey, White
• Voltage: 110V, 220V, 380V, 440V
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Power Source: Battery, Electric
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 1 Yr, 2 Yrs
• Autoamatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic

This is the real Control Part of the attachment. It comprises of two major divisions; a.) Motor Controller - it has a CPU, a Stepper Drive, a Power Supply and a user friendly keyboard with display. b.) Temperature Controller - this controls the temperature of the heater plate. It has as PID type temperature controller and a 3 phase solid state relay card to drive the power of the heater plate.  High Voltage Power Supply- This part is located in the left most slot of the mother board. It has a Red colored LED (light) on this. The light glows when the power is , switched ON. Output voltage of this card is 55 volts and 70 volts D.C. Low Voltage Power Supply- This is inserted in the 2nd slot of the mother board. It has a green colored LED on it. Output voltages of this part are -5v, 15 v,5v D.C. CPU- This card contains the micro controller, which is responsibie for the total, control. It has a gray colored flat cable, 'which goes to the keyboard and display. Location of this part is third slot on the motherboard. Stepper Drive- This part supplies power to the stepper motor. Its location is fourth slot of the motherboard. Failure of this card results in power failure of the motor. Temperature Controller- This device is Em advanced temp. Controlier with PID control technique. It controls the temperature of the heater plate. Solid State Contactor- It is mounted on an insertable card. Its location is in the fifth slot of the motherboard. Keyboard & Display- This is mounted on the front plate of the control panel. It is used to feed and see the variables of the foil pulling. MCB- It is located on the left wall of the control panel. It is used to disconnect the three phase power of trreheater plate. Motherboard- This holds all the electronic cards and connects them to each other as well as the external devices. Connectors

Features: Rugged design Excellent performance Easy to operate Other Details: Protections: Overload & Dry Run Suitable For: Submersible Pump. & Open well Pump Input Voltage: 230 V AC Current Capacity: 18 A Max Current Setting: 14 A Max Available in: 0.5 HP, 0.75 HP, 1 HP, 1.5 HP, 2 HP, 2 HP Heavy Duty & 3 HP on request

We are offering a wide array of Electronic PLC Panel, as we are a well-known manufacturer and supplier of the product. The offered product is manufactured using premium quality raw material and contemporary technology to meet various existing industrial quality norms. We customize the offered range to meet the diverse requirements of the clients. Our esteemed clients can avail this PLC Panel from us at market leading prices.Features:• Sturdy Construction• Long Lasting Performance• Optimum Performance• Corrosion Resistance

We are renowned as one of the dependable Control Panel Exporters from India. Various national as well as international clients are placing repeated orders for the Electronic Control Panel as no alternative is available in terms of quality and performance. Additionally, customers are eased with the availability of the Electronic Computerized Control Panel confirming to the international standards. Salient Features : All the parameter like, temerature of bitumen-hot mix material exhaust gases and aggregate weight, asphalt percentage, hot mix material weight etc. are displayed on the control panel.It is equipped with protection like single phasing, overload, fuses, swquence interlock etc.Load wise data can be printed on the printer provided in the panel.The body of the panel is fabricked from CRC sheet and is duly powder coated.

 Electronic control panel with authomatic shut-down timer  3 extraction levels 2 + 1 TURBO  Maximum air flow: 1200m3h  Minimum sound power: 48dB(A), Maximum: 65dB(A)  BT2 motor, Extra silent, Maximum energy consumption 240W  High efficiency LED lighting  Easy-to-install system  Dishwasher-washable filters  Finished Stainless steel (FARO ISLAND)  Max. Pressure 405 Pa  150/125 mm outlet diameter

Cotmac Electronics offers quality low voltage control solutions. We manufacture control panels for both indoor and outdoor applications in Mild Steel and Stainless Steel. Our product range and capabilities cater to all industries ranging from automobile to process, from oil and gas to infrastructure. Our modular designs ensure maximum accessibility. To name a few of our products MCC Panels PCC Panels AMF Panels PLC Panels Drive Panels

We have on offer high quality control panels (Design 1). These panels are made from superior quality materials with adherence to industry quality standards.

We are offering electronic submerssible panel. in this panel we gave digital electronic volt & amp. Meter ( for single phase ) we gave all feature in this electronic submerssible panel to protect the motor from high voltage and high current ( load ) it gives 100% safty to burrent the motor.'packaging material :- corrugated box minimum order quantity  :-  50 pieces

Electronic control panel uses latest microprocessor which incorporates state of the art technology with fo lowing features. The panel s having unique feature of two modes of operations i. e. Panel control mode & PC control mode. With pane contro mode, the mach ne can be operated from panel ( without PC) and g ves output results / graph on dot matrix printer connected to the panel. With PC control mode, load, displacement and extension data transferred to PC through RS- 232 serial port thus giving rea time disc ay and graph of se ected test on PC.   Features :• Full fledged sealed membrane keyboard with numeric keypad.• Data entry for specimen d mensions.• Push button tare facility for load & reset for displacement/extension.• Serial port for commun cation wth PC.• Built in centronics interface for dot matrix printer.• Modulus data output (optional ).• Scrolling of test result data up to breakage.• Results include load Vs Displacement Curve, Max Load/ Displacement. UTS, % Elong % reduction n Area,  Yield oad, Proof Stress.• Over oad safety through opto isolated output     Serial Communications Software.MCS-MP series control panel can be connected to any PC using RS-232 commun cat on port. MCS offers window based software on PC to enable the user to effectively evaluate different parameters. The Features include• Real time graph of selected test on PC.• User friendly software with colour graphics.• Wide Range of Data entry for easy test setup• Unit interchangeability of load in kg., T, N, kN.• Extensive graphics, Curve fitting / Zooming / Tracing.• Effective file handing for data storage, RD BMS based.• Operational instructions on HELP Screen for a I programme modules.• Automatic calculation of Proof stress and Young s Modulus with graphical representation• Automate reseal ling of graph.• Batch testing, mult graph facility and statistica anaysis with MIS reports (optional).• Load, displacement, extension, strain rate values are displayed at all times on PC screen• Load Displacement, Load V Extenssion, Stress Strain graphs available for single test run..• Results include graph, Max load Max displacement, U.T.S.,% E ongation,% Reduction In Area, proof load,  proof stress, Yield stress, Youngs Modulus, breaking load, etc. Measuring System with PC Add on cards MCS-PC.In MCS PC model, the measuring system is based on two PCB's inserted in PC motherboard slots. All the system features are same as MCS-MP with serial software.Electronic ExtensometerMCS offers Strain Gauge type electronic extensometer for the evaluation of 0.2 Proof Stress 8, Young's modulus values.Extensometer Specifications• Model MCE-2• Type Strain Gauge• Extension 2 mm• Gauge Lenth 25 / 50 mm• Maximum Dia. : 25 mm

• Features: Shock proof , Industry approved design , Reliable

Salient Features Switch ON & OFF automtically Dry run and over load Protection Digital Display for Amps & Voltage read out User programmable Amps control Auto / Manual option Float Control Option Dry run Programmable Timer Note: The Readings given in the above charts are as per our lab tests, there may be slight variations in the performance due to voltage fluctuations and improper installation. In view of continuous developments. The information given in the catalogue is subject to change without notice.