Construction Machine Dealers in Satara

• Fully Automatic, PLC controlled, Hydraulic Machine: Motor
• SIMENS 15 Hp: Hydrolic
• Pressure 80 Ton Vedol 68 Oil with 300 ltr. Oil tank Yuken India ltd. Make Control valves: Operating
• Fully Automatic and Manual operated: System
• Heavy Robust Metal Body for long life No foundation required Only 50 Wooden pallets Required: Plant
• Machine: Requirements

Our Fly Ash Bricks Making Machines are fully automatic, PLC controlled hydraulic machines, which have a heavy robust metal body. These machines are widely known for their smooth functioning and long service life.

• Voltage: 110V
• Type: Batch Type Washing Machine
• Weight: 100-1000kg
• Color: Black, Brown
• Condition: New
• Automatic Grade: Automatic

The best thing about our Batch Type Trickle Impregnating Machine is that it is suitable for pre-heating, trickling and post heating of stators. Moreover, it is simple to operate and compact in design. Maintaining our Batch Type Trickle Impregnating Machine for a long time is very easy. In addition to this, our Batch Type Trickle Impregnating Machine is ideal for carrying out following automatic cycle : Load stators on spindles, connect winding wires, close the front door and start cycle with push button Spindles start rotating and get pre-heated to predetermined temperature Temperature of stator is sensed by non-contact TIC Spindle holding plate is tilted up and varnish pipes are tilted down to adjust the place of trickling Varnish pump starts and pre-determined varnish is trickled on stators / rotors and pump stops. Trickle Temperature is maintained with the non-contact TIC Spindle holding plate is tilted down and varnish pipes are tilted up and post heating starts After completing the post heating spindles, stop Open the door & remove wire connections and Un-load the ready stators

We are the leading suppliers of Concrete Testing equipments such as CTM,UTM etc,we also supply cube moulds,slump cone etc and all types of concrete testing equipment.

a1 quality ready mix plaster in wholesale price

Keeping up with the latest demands of customers, we, as a trusted supplier strive to provide quality batching plants. We promise to deliver the orders within the postulated time frame as we are backed by excellent logistics facility.

PD 1/2 Double  Gear Sugarcane Crusher    Agro PD – 2 Sugarcane crusher is horizontal one with three rollers held between two heavy cast iron side plates and mounted on heavy cast frame. It represents the development of steady and long experience and a number of persistent trials in the manufacture of sugarcane crusher. This crusher is provided with chain oil bearing for side Plates. There is no necessity of greasing the bearings, but they should be filled sufficiently with lubricating oil. The replacement of these bearings is to be done rarely. It is also very easy to replace when required. The fitting of side plates to the base ensures correct alignment of the shafts. The crusher works on oil engine or electric power and can successfully handle any kind of sugarcane. Of all the various models of horizontal sugarcane crusher. Agro PD – 2 stands first for smooth operation and low cost of crushing.   CONSTRUCTIONAL FEATURES ROLLERS. Made of high grade cast iron. They are grooved in order to proper nib on sugarcane. Axles: Made of high grade carbon steel forced into the Roller under hydraulic pressure. They will not become loose even under most strenuous conditions. Gears:All gears are made of cast iron. They are carefully meshed ensuring noiseless and smooth running of the crusher. Bearings :Made of high grade gun metal. The bearing holders made of Cast iron can be adjusted by tightening bolts in order to make rollers or close to suite the size of the sugarcane. SIDE PLATES :- Made of high grade cast iron and carefully machined being very heavy in weight. They offer rigidity to the crusher and it tends to make the crusher safe and compact machine. N. B.: Our capacity ratings are for 12 ½ % fiber content and for continuous operation. In practice there is bound to be some variation due to variety, size and conditions of cane and also the skill of the operator. The sizes given in mm are approximate equivalents of sizes in inches. As improvements are made from time to time the specifications in this bulletin are subject to alteration without notice.

• Power: 15 HP
• Capacity: 9" x 6" x 4"

Fully automatic PLC controlled machine. Hydraulic pressure-63 Tons. Single person operated. Maximum strength achieved is M-40. Fully automatic, manual or single cycle operations supported.Heavy duty robost body.

• Power: 3.5 H.P. Diesel Engine
• Handi Yoke: Made in Square Tube
• Mixing Handi: Heavy Duty Drum with Bearing & M.S. Blades for efficient mixing
• Gear Ring: Repiaceable Caut Iron Ring
• Wheels: 4 Nos , 4' * 6'
• Dimension (L * W * H): (2455 * 1098 * 1665)mm

We proudly define ourselves as the most reliable Supplier of excellent quality Handtools in India. We offer a huge assortment of Handtools that is manufactured by using the high grade raw materials. Our extensive range of Handtools comes with life-time guarantee against Material / Manufacturing Defects. Our Handtools are available at the market leading prices. Attributes : SturdyLife-time GuaranteeAvailable at reasonable pricesSuperior performance

Trickle Varnish Impregnating Machine is suitable for pre-heating, trickling and post heating of stators. The machine is simple and compact in design. It is easy for operation and maintenance. It is ideally suitable for batch type production of stators. The machine is suitable for carrying out following automatic cycle. 1. Load stators on spindles, connect winding wires, close the front door and start cycle with push button.2. Spindles start rotating and get pre-heated to predetermined temperature.3. Temperature of stator is sensed by non Contact-Us TIC.4. Spindle holding plate is tilted up and varnish pipes are tilted down to adjust the place of trickling.5. Varnish pump starts and pre determined varnish is trickled on stators / rotors and pump stops. Trickle Temperature is      maintained with the non Contact-Us TIC6. Spindle holding plate is tilted down and varnish pipes are tilted up and post heating starts.7. After completing the post heating spindles, stop.8. Open the door & remove wire connections and Un-load the ready stators. Trickle varnishing Machine consists of following major components : 1. Rotation System : Spindles for holding job fixtures are mounted on swiveling L-plate. Spindles are mounted on pillow blocks and provided with slip rings for passing current through winding during preheating and curing. Electric connection pins are provided on the faceplates for quick terminal connections. Suitable job holding arrangement is provided to hold & locate the stators. Spindles are rotated by geared motor, chain, sprockets mounted on L-plate. 2. Job tilting and Varnish tubes Positioning System : L-plate is tilted by 10 to 15° to ensure varnish reaching the other end & metered varnish is trickled on the job. Job is made horizontal after varnish trickling i.e. while curing for uniform distribution of varnish. Pneumatic job tilting & pipe positioning arrangement is provided to ensure the place of varnish trickling on the job. 3. Varnish Feeding System : arnish is fed by peristaltic tube pumps driven by D.C. motors with variable speed control to control varnish quantity according to the models. Varnish quantity is varied & controlled by setting pump speed and trickle time. 4. Heating System : Jobs are heated by passing pre determined current for pre determined time through job windings. The current passing through the jobs is controlled by step-less variable voltage D.C. power source. Pre heating, Trickle and curing temperatures are controlled with non Contact-Us thermo sensor. 5. Centralized control panel : PLC Control with easy setting and control of process parameters such as preheating, trickling and curing time and temperature, varnish Quantity, etc. 6. Fumes Extraction System : One exhaust fan with ducting is provided on the top of the machine for varnish fumes extraction.

Single Decker bull block• Double Decker bull block • Fine gauge wire Drawing machine• Annealing Pots & Furnaces

Fly Ash Brick Making Machine, Planetary Concrete Mixer, wet cast paver plant

We are offering constructions machinery such as artificial sand making machine in india.

heavy construction equipments

Bar Cutting Machine, Bar Bending Machine, combined bar bending machine

Sugar Cane Crusher

Artificial Sand Making Machines, vsi crusher

abrasives materials, Mangalam Low Hydrogen Welding Electrode, SWR Pipe

Planetary Concrete Mixer, Concrete planetary Mixers, Fly Ash Brick Machines