Hospital Autoclave & Sterilizers Dealers in Sp Road, Secunderabad

Raw Material Inputs: Copper Tubes Nicrome wire Insulation Powder (MgO) Brass Flanges, Screws and Nuts PROCESS Cut length copper tube Nicrome wire is wound like a coil on the coiler and terminal pins are spot welded on both ends The Coil is stretched inside the copper tube co-axial to the copper tube and cap is provided at one end and placed on to the filling machine and Insulation powder is filled through and the other end is closed with plastic cap and all pipes are removed in a batch. Squeezing Hot Annealing Bending Brass Flange Brazing Cleaning and Boring Nickle Plating Assembly Quality tests PACKING Each Heating element is wrapped in polythene cover and packed in a corrugated box and as per customer requirement

Specifications Inside Wall: S.S. 304. Door: S.S. 304. Outside Wall: Required heating arrangement for maintaining temp. in chamber will be provided. It will be properly insulated and covered. Safety Valve provided for release of gas outside the chamber, if pressure inside chamber increases beyond 20 psi. Temperature indicator: Range - 0 to 100°C. Pressure Indicator: Range - 28" vacuum to 30 psi. Vacuum System: Vacuuming is achieved using vacuum pump. Exhaust & Air Break: Exhaust for sterilizer chamber gases is provided. For vacuum break, air suction is provided through filter. Premium Technologies Three trays of S.S.304 will be provided for easy loading of material. Locking System: Manual safety lock provided on door. Applications Used to sterile disposables & materials with low melting point.

• Category: Bolting Solutions

Introducing Hands Free Bolting’s revolutionary new Safety Valve. Designed to provide an additional element of safety to the tool operator in controlled bolting operations. The Patent Pending Hands Free Bolting Safety Valve fits in-line between the hydraulic power pack and hydraulic torque tool. Whilst the trigger is activated the tool remains in a live position, once the trigger is released hydraulic power is automatically cut and the tool operator is free to re-locate the tool without concern of accidental tool activation. The Safety Valve works with all leading hydraulic power packs and torque tools and is supplied complete with whip hose and screw couplers to connect to your tool.

Priorclave has developed two individual styles of front loading steam sterilisers – circular and rectangular chambers - to suit extremes in loading requirements. Front Loading, circular chamber autoclaves come in 100, 150, 200 and 320 litres standard chamber sizes. Their design gives user 20% more loading area than conventional models. Priorclave autoclaves can be direct-steam heated or supplied with steam generated within the chamber (electrical models only). They also include features such as forced air cooling and automatic timed free-steaming.

• STANDARDS: ASME, BS/DIN and IBR codes.
• DESIGN AND TESTED: as per API-526/527.

Relief valve opens automatically, relieving system pressure to prevent over pressurization of a system. Process pressure acts against the bottom of the disc. As pressure exceeds the setpoint for the valve, established by a spring in most cases, the disk is pushed upward. When system pressure returns below the valve's setpoint, the spring push back the of the disc forcing it shut. By adjusting the tension on the spring, the setpoint can be adjusted.

Safety Relief Valve, chemical sealed pressure gauge, BOURDEN PRESSURE GAUGE