Electrical Components Dealers in Shivaji Nagar, Secunderabad

• Material: Metal
• Thickness: 100-250+ Microns
• Length: 2000-3000mm
• Application: Earthing Purpose
• Feature: High Clarity, Smooth Texture, Uniform Finish
• Certificayion: CE Certified
• Coating: Copper

Details Copper Coating thickness of 100-250 + microns as per UL standards. Very high electrical conductivity (5.96x107 s/m) and anti - corrosion properties Long service life Best Suited for harsh environments   Objectives of earthing Provide an alternative path tor the fault current to flow so that it will not endanger man or machine.   Ensure that all exposed conductive parts do not reach a dangerous potential.I\/laintain the voltage at any part of an electrical system at a known value so as to prevent over current or excessive voltage developing in the machinery.   End Result Human safety Protect equipment Electrostatic discharge   What ls Earthing The primary purpose of earthing is to reduce the risk of serious electric shock from current leaking into uninsulated metal parts of an appliance, power tool, or other electrical devices. In a properly earthed system, such leaking/fault current is carried away harmlessly while tripping the fuse. Earthing also provides protection from large electrical disturbances like lightning strikes and power surges. It also aids in the dissipation of hazardous static electrical charges.   Although most electrical systems have fuses or circuit breakers for protection against a fault current, the human body may be fatally electrocuted by a current of less than one ampere which is well below the point at which a fuse or breaker will operate. Earthing helps minimize such hazards from occurring.   Over the years, billions of dollars worth of property has been destroyed due to electrical failures, short circuits etc causing fires, electrocutions and other mishaps. But more importantly, lives were lost.   This makes earthing of crucial importance everywhere electricity is used.   Installation Method It is very important that Ashlok earthing systems are installed correctly for system to work safely, to get maximum benefit & advantage. Upon proper installation. the earthing system exhibits low earth resistance value compared to conventional earthing system in a given soil conditions. Please notethatASHLOk earthing system once installed needs very little or negligible maintenance, however, pouring of few bucket of waters in side and around the earth pits is recommended in poorsoil conditions, It is to be understood thatearth resistance value of any earthing system varies from place to place since soils are hardly homogeneous in nature and exhibits different & varying soil resistivity even in close proximity. in such cases, use of multiple earth pits in grid formation is recommended to get the desired earth resistance value.   Note: Since there exist varying types ofsoil & environment conditions around the world, the best resistance values for an earthing system vary.   Normal Soil Make a bore of 8” to 10" in dia up to the electrode length of 2/3 meters. Fill the bottom 4" of the bore with the supplied BFC (Electrodite). Vertically, place the electrode in the centre of the pit. Fill the cavityaround theelectrodewith the BFC(E|ectrodite). Ensure there are no air gaps in the BFC filled cavity region. Now pour sufficient water into the earth pit until the BFC takes theform of a paste/mud. Allow the pit toabsorb thewaterand settle, Test the earth pit and makethe required connectionsto theelectrical service box   Caution: Avoid excess watering and do NOT hammerthe electrode.

• Operating Current: AC 
• Length: 350 mm,450 mm
• Material: Mild Steel,Stainless Steel
• Features: Precisely-designed, Easy to install, Sturdy construction .
• Brand: ESAB,Ador
• Size: 4.0MM, 2.5 mm, 3.15 mm, 5 mm

• Country of Origin: India
• Type: Brass Plug
• Material: Brass
• Shape: Round
• Color: Golden
• Finishing: Polished
• Brand Name: DIJ, KKI, PBI, ETC

brass plug, all sizes available, all brands available, dij, pbi, kki.

• Material: MS
• Brand Name: Diamond Delta
• Finish: Powder Coated
• Weight: 100-150g
• Thickness: 2-5 mm

We are counted amongst the top-most Hensel products dealers in Hyderabad, India. Our collection includes an extensive variety of Hensel items which are as follows: -DK Cable Junction Boxes IP 65/ IP 66/ IP 67-KV small-type distribution boards IP 54/ IP 65-Enystar Distribution Boards-FP Empty Enclosures / Circuit Breaker Boxes IP 66-Mi Distributor IP 65-Empty boxes/ Circuit Breaker Boxes-Assemblies for construction sites IP 44/ IP 65-Rubber cable Drum IP44, Cable Entry Systems IP 65/ IP 55/ IP54-EMC Cable Glands-Metal Cable Glands-Insulated Plug Sockets IP 44/ IP67-Control Units IP 65-Push Button Station IP 65 and many more. We have a wide collection of the above mentioned Hensel products that we have procured from the leading brands directly. All the products of the company are made effective to be used in varied electrical purposes at domestic, and industrial places. We also test the quality and performance of all these electrical products at international parameters before delivering them to our patrons. We are a leading Hensel products distributor in Hyderabad, and provide the best quality Hensel products at affordable prices. For more information about Hensel products, explore the PDF enclosed below.

• sizes: 19mm, 25mm, 32mm, 40mm

PVC Conduits are manufactured in accordance with Bureau of India standards specifications IS 9537 (part-3) in the range of 16mm to 63mm with Light, Medium and Heavy ranges. These pipes are available in FRLS category also.UPVC conduits are available in the commercial market accepted sizes of 19mm, 25mm, 32mm, 40mm and 50mm with 1.0mm, 1.2mm, 1.5mm, 1.8mm and 2.0mm gauges. These pipes are equivalent to IS 9537 standard pipes in all other technical parameters except pipe Outer diameter and Pipe gauge.Moulded coupler, Moulded Tee, Moulded Elbow, Junction boxes, Fan boxes, Deep Junction boxes and Fabricated Long Bends are available to cater to the requirement of UPVC conduit piping system.Non Conductor of Electricity and prevent Electrical shocks, High mechnical strength for buried and open application, Non corrosive in nature and are immune to Chemical and Galvanic corrosion, Smooth inner surface for easy wiring. Flexibility for long radius bending, Long lasting life.

• Brand Name: Danfoss
• Voltage Type: AC/DC
• Ambient Temperature: -40 to 80 Deg.C
• Power Consumption: 12-14 W
• Voltage Rating: 12-230 V

flameproof equipment, Armoured Cables, Telephone Cables, optic fiber cables

These are Specially formulated maintenance purpose welding electrode (MMAW) to ensure enhancement of working performance with minimum heat input. Designed for requirement of reconditioning of various industrial components.

Non-Ferrous Metals, Zinc Dross, Ferrous Plate, Stainless Steel Strip

Electrical Equipments, modern electrical equipment, bank products

electrical overhead line material

Electrical Panels, MCCB Panel, PCC Panel, VCB Panel, Air Circuit Breaker

Welding Electrodes, Welding Rods

Earthing Electrodes, Cable Jointing Kits, commercial lighting

building electrodes, Iron Wire, Mild Steel Wire, wire nails asphalt

Electrical Equipments, Transformers, Voltage Stabilizers

Electrical Equipment, Electrical Goods, electrical product

Welding Electrodes

Welding Electrode, Earthing Material, Fire Clay Brick

Platinized Titanium Anode, Blue Silica Gel, chemical zinc oxide

Pneumatic Equipment, Hydraulic Equipment, Pipes, Grinding Wheels, V-Belts

Welding Electrodes, Firemen Boot, Polyster Wind Indicator

Welding Electrodes, saw welding flux, Saw Wire

special electrodes, Gas Regulators, Torches, WELDING CABLES

Electrical Equipments, Auto Transformer

Electrical Equipment, Electrical Power Tools

Spring Loaded Current Collector, AC Disc Brake, EOT Crane Repair Service

Welding Electrodes, Pipe Fitting, Cutting Tools, Cutting Hammers