KIRAN UDYOG SP Road, Secunderabad, Telangana

Polyester Non Adhesive Tapes are manufactured from Polyester yarn. These Polyester woven tapes will not burn or smoulder and retain as much as 25% of its tensile strength at 1550 C. They exhibit a high strength-to-weight ratio while maintaining excellent flexibility. Free of environmentally contaminating and hazardous chemicals. Able to withstand assembly handling, cut-through and mechanical stress.

UL recognized GRADE “A” component under UL File No. # E324343 (UZFT2) and NEMA TF – 1 Type 5, Silicon Elastomer Coated Fiberglass Sleeving are flexible with an outer layer of Fiberglass braid. The over braid bonding process adheres the over braid to the silicon coated substrate and minimizes end fray to improve assembly performance and eliminate the long term handling effects of operator dermatitis. KIRAN KVPI – 200 sleeving is a high temperature Silicon Rubber Elastomer that is pressure bonded to a heat stabilized fiberglass braid. KIRAN VPI – 200 Silicon Sleeving is resistant to most acids, oils, organic solvents and water. It is also compatible with virtually all Electrical grade varnishes and Impregnation systems suitable for all VPI applications. This double wall sleeving provides higher abrasion resistance and for vacuum pressure impregnation. Overlap braid on sleeving being saturated has high resin absorption properties and are highly protective.

Length : Continuous or Customized cut lengths available on request.

UL recognized GRADE “A” component under UL File No. # E324343 (UZFT2) and Grade-B UL FILE NO.E491961,Silicon Elastomer Coated Fiberglass Sleeving are flexible, confirming to wired and connections, keeping its elasticity in a range between-60ºC to +220º C. It can also with stand up to +250 º C for a short while. KIRAN SRG – 001 sleeving is a high temperature Silicon Rubber Elastomer that is pressure bonded to a heat stabilized fiberglass braid. Its outstanding flexibility allows to withstand severe push-back, even in lower dielectric grades. KIRAN SRG – 001 sleeving is the ideal insulation where sharp bends are encountered or the ability to expand over irregular shaped parts is required. The electrical strength stays higher even after folding and bending. The sleeving have excellent abrasion resistance, flame retardant and are physically tough. It can with stand high difference in temperatures and being moisture resistant, prevents humidity to enhance the life of the generator / motor. Excellent low temperature flexibility with outstanding flame retardant properties. Resistant to acids, alkalis, organic solvents and aliphatic hydrocarbons.

Color : Available in different colors on request

Length : Continuous or Customized cut lengths available on request.

Polyester Non Adhesive Tapes are manufactured from Polyester yarn. These Polyester woven tapes will not burn or smoulder and retain as much as 25% of its tensile strength at 1550 C.. They exhibit a high strength-to-weight ratio while maintaining excellent flexibility. Free of environmentally contaminating and hazardous chemicals. Able to withstand assembly handling, cut-through and mechanical stress.

Color : White

NYLON Monofilament Expandable Sleeving is commonly used in the automotive industry to protect wires and hoses from excessive Wear. Vibration and Abrasion can tear automotive hoses to pieces, but Nylon can increase hose life up to 300%. This lengthened lifespan is recognized in terms of reduced maintenance and downtime leading to greater customer satisfaction. NYLON Monofilament Expandable Sleeving is braided from 0.012″ Nylon 6-6 polyamide monofilament. The tight braid construction fully covers and provides excellent surface abrasion resistance for assemblies exposed to excessive wear. The smooth Nylon fibers and tight construction also reduces abrasion damage caused by hoses and harnesses rubbing against the inside wall of the sleeving. Adaptable & Suitable for all weather conditions. Open weave construction allows expansion above or below original diameter.

Color : Black.Grey

Type : Nylon 6.6

Fiberglass Tapes are narrow woven fabric made of Non-alkali E-glass fibers with a strong selvage edge. This prevents fraying and unraveling of fabric at the edges. The narrow widths eliminate the cutting of wider fiberglass fabrics down to size and increases accuracy and productivity. The tightly woven tapes offer more uniformity and are highly drapable. Free of environmentally contaminating and hazardous chemicals. Able to withstand assembly handling, cut-through and mechanical stress.

Width : 1/4 Inch to 6 Inches

Thickness : 1/4 Inch to 6 Inches

Color : White

Length : 50, 100, 500 Meters or as per Customer Request

Type : Plain Weave and Twill Weave upon Customer Request

Fiberglass Tapes are narrow woven fabric made of Non-alkali E-glass fibers with a strong selvage edge. This prevents fraying and unraveling of fabric at the edges. The narrow widths eliminate the cutting of wider fiberglass fabrics down to size and increases accuracy and productivity. The tightly woven tapes offer more uniformity and are highly drapable.

Thickness : 1/4 Inch to 6 Inches

Fiberglass sleeving impregnated with Polyurethane varnish is used where reliable heat resistance & dielectric strength is required. The product available in different grades with varying Dielectric Strength upto 4000 Volts as per applications, consisting an inner wall layer made out of Fiberglass Yarn that is Braided and Coated with Polyurethane. KIRAN PVG – 301 F Class sleeving is recommended as a universal coated sleeving for all thermal requirements of Class 155°C. The sleeving is compatible with most insulating varnishes and is capable of shortthermo operation above its thermal classification.

Fiberglass Braids are made from high temperature fiberglass yarn with low thermal conductivity. The rope and braid are designed as gasket or seal for various industrial applicationst. Free of environmentally contaminating and hazardous chemicals. Extremely flexible. Able to withstand assembly handling, cut-through and mechanical stress.

Fiberglass braided Cords are intended for high-temperature applications up to 550ºC. The Cord consists of fiberglass yarn core with a fiberglass braided jacket to form an exact diameter for controlled compression seals. Larger diameters have a “Braid-Over-Braid” or “Yarn- Filled -Braid” jacket for durability and precise gasket dimensions. Cords are available in many sizes and manufactured to fit Customer Specifications for Roundness and Softness. These Cords are suitable for all types of sealing applications where High Temperatures upto 550ºC are needed. Cords are the best choice for new or alternative gaskets for boilers, fireproof safe applications, flanges, furnaces, gas fireplaces, glass manufacturing, ovens, pipe wraps, thermal insulation. Free of environmentally contaminating and hazardous chemicals. Able to withstand assembly handling, cut-through and mechanical stress.

Color : White

Type : Glass Filled Type and Braided Type

UL recognized component under UL File No. # E491961, Acrylic Coated Fiberglass Braided Sleeving are precisely engineered sleeving are flexible with an outer layer of E glass Fiberglass braid. The outer fiberglass braid is lightly treated with acrylic resin to prevent fray, improve abrasion resistance and allow coating by the VPI resin. KIRAN VPI – 155 is used for applications which require VPI processes and higher temperatures. It can be used for high voltage transformers as well as for aerospace and aircraft wiring leads. VPI-155 sleeving allows for expansion to fit over difficult joints and terminals. KIRAN VPI – 155 with an over braided glass jacket. Lightly treated with acrylic resin to prevent end fray and improve abrasion resistance. Resistant to most acids and most organic solvents.

Color : Available in different colors on request

Length : Continuous or Customized cut lengths available on request.