Milling Machine Dealers in Secunderabad

5-axis high-speed machining centre the ideal solution for milling medium and large size work pieces in steel, aluminum, composite materials and resin. Rigidity and high dynamics are distinctive features of this 5-axis machining centre making it ideal for machining a multitude of components and products at high speeds with maximum milling performance. Matrix specializes the speed of the linear axes which reaches up to 40mmin, to the Direct Drive head with a rotational speed of up to 100 rpm and to continuous rotation of axis C, this 5-axis high-speed machining centre is the perfect solution for specific production requirements as profiling complex work pieces with 5 continuous axes ensuring and guaranteeing maximum machining precision and performance. The direct drive twist head which can be positioned at any angle thanks to the powerful hydraulic brakes also allows for fitting spindles up to 40 kW with a rotational speed of up to 28,000 rpm incorporating into this machine powerful milling performance across a choice of materials as light and specials alloys which are used primarily in the aerospace industry for manufacturing precision components.

Features:- Uniform whitening with less broken , Highest marks for food sanitation, Cool process, High capacity with minimum space requirement, Smooth running, Easy operation and maintenance,

Unique offers a complete line of drilling Rotary Table that range from 17 �" to 60 1/2". Unique Rotary Table are fabricated from special grade steels and cranes with heavy duty main thrust bearing and precision machined spiral, Bevel Gear that results in superior strength, toughness and durability.

The MACHINE has automatic feeding arrangement in longitudinal, cross and vertical direction, having selection from different speeds. The millilg sprndle is fitted in two taper roller bearings. The different spindle speeds which are in geometrical progression are obtained by means of sliding gears, by u,hich only such gears come into mesh which are necessary for the desired speed. All the gears run in oil-bath the u'ear thus berng minimized.The table has a strong cross section and a coolant groove, fitted with a strainer at the draining point. The table screw has ph. bronze nut which minimizes wear and tear. The table screw is mounted on taper bearings which takes the axial load ofthe screw. Table slide is hydraulically operated and the cross-slide is hydromecanically operated. Quick hydraulic retraction and forward movement of cross-slide is provided. The cut is taken by hand to avoid any damage to work piece and grinding wheel.The knee is well braced by internal partition walls giving it the greatest stability. In all respects, it has been carefully designed with wide slide surfaces which gives a rigid support to saddle and table. The vertical screw for raising & lowering the knee is provided with thrust bearings for talang the verlical load. The feed gear box is built on side of the knee. The base, which at the same time serves as a coolant tank is simple dimensioned and healy. The coolant pump and coolant pipes are so dimensioned that enough coolant is supplied to the cutter. The column owing to its special form is very n-uid and all guides are hand scraped.

• Inside Turning Radius: 3.45 m
• Maximum Travel Speed: 4.1 km/h
• Operating Speed: 27.0 m/min
• Operating Weight with full water tank 17600.0 kg Shipping Weight with empty water tank 17100.0 kg Inside Turning Radius 3.45 m Maximum Travel Speed 4.1 km/h Op: Operating Weight with full water tank
• 17600.0 kg: Shipping Weight with empty water tank
• 17100.0 kg: Inside Turning Radius
• 3.45 m: Maximum Travel Speed
• 4.1 km/h: Operating Speed
• 27.0 m/min: Engine Model

• Brand Name: Nagendra Agencies
• Capacity: 120-150 ton/day
• Power: 10-20 HP
• Voltage: 320 V
• Frequency: 50-60 Hz
• Automation Grade: Automatic
• Phase: Single
• Surface Finish: Paint Coated

Rice Mill Full Plant for 1ton and 2 Ton Capacity

Planetary gearboxes have much higher mechanical rating compared to parallel shaft gearbox as the power being transmitted gets equally distributed among three to five streams in each stage thus reducing the induced stresses which very much optimizes the size as well allows to accommodate higher ratio to eliminate open pair. The reduction in floor space as compared to conventional drive i.e with open gearing, almost to the tune of 50% reduction in floor space.

hydraulic excavators, bulldozers, Dumpers, Forklifts, front end loaders

cnc gantry milling machines, Cnc Grinding Machines, cnc heavy duty lathes

Walk Behind Power Trowel Floater, Portable Frequency Converter, Tower Crane

bulldozers, Dumpers, heavy earthmoving machinery, Heavy Trucks

Wet Mix Plant, Concrete mixing plant manufacturer, Asphalt Batching Plant

vacuum de watering system, COKE AND COAL, Construction Machinery

Vacuum Dewatering System, Commercial Ro System

Flour Mill Machinery, Rice Processing Machinery

Topsoil Excavation Equipment

cnc milling, Cnc Lathe, CNC Wire Cut, Lathes, surface grinders

Road Construction Equipment, Backhoe Loader, Forklifts, Tower Crane

milling Machines, precision machine tools, Forgings, Cutter, Tool Grinder

mini milling machine, Spark Resistant Sledge Hammer, Rutland Trenching Shovel

beltsice milling machinery, Bearings, Rubber

Excavator, Earth Moving Equipments, hydraulics o ring, Seal Kits

Excavator

wheat flour machinery, rice hullers

Surface Grinder, welding inverters, Welding Electrodes