Gate & Sluice Valves Dealers in Secunderabad

• Material: Metal
• Brand Name: Vickers
• Type: Control Valves
• Sealing Test Pressure: 1.0 – 2.0 Mpa
• Nominal Diameter: 32 – 150 (mm)
• Suitable Temperature: 0 – 80 Degree Celsius

• Country of Origin: India
• Type: Brass Plug
• Material: Brass
• Shape: Round
• Color: Golden
• Finishing: Polished
• Brand Name: DIJ, KKI, PBI, ETC

brass plug, all sizes available, all brands available, dij, pbi, kki.

• Packaging Type: Carton
• Material: Metal
• Media: Water
• Automatic Grade: Manual
• Warranty: 5 Year
• Usage: Water Fitting

Details : Pressure independent control valves balance the system at every point over the range of the control valve within 5% accuracy Control flow exactly at all load conditions, not just at design conditions Improved control and performance helps extend actuator life expectancy High Turn-Down Ratio/Equal Percentage Flow results in linear heat transfer for optimal control. The characterized insert is integral to the ball, resulting in longer service life and higher differential pressure capabilities. Less torque is needed, so you can use lower-cost, low-torque actuators on larger pipe sizes No Cv calculation required - just pick the valve that matches the flow requirements - Flow range of 1 to 95 gpm Field serviceable stem allows valve to be serviced in the field rather than cut from the pipe Optional test ports facilitate system set-up for balancing report Manual override to control valve during installation or in the event of power failure Full range of sizes from 1/2" to 6" 5-year actuator warranty

We are one of the superior suppliers of Cast Iron Spindle Gate Valve, all the way from Hyderabad, Andhra Pradesh. These gate valves are manufactured using premium quality stainless steel with flanged ends. The drillings might vary, depending on the customer requirements. These gate valves are now available in various IS standards, to match various flexible needs of customers, and within affordable rates.

We are offering pressure relief valve. These type of valves used to control or limit the pressure in system these valves are available in ng6, ng 10& ng 20 size and working pressure are from 50kg to 400 bar.

PRESSURE RELIEF VALVE TYPE:SPRING LOADED ANGLE TYPE DESIGN STANDARD:API RP563 MOC:S.S AND C.S SIZES UPTO 12" CONNECTIONS:FLANGED/SCREWED/BUTT-WELD/SOCKETWELD

In order to meet the various requirements of the clients, our organization is offering a wide array of Ball Valves 2 Way - High Pressure. We make use of premium quality raw material in the manufacturing of offered ball valves to ensure these have durability. Prior to dispatch, we make these ball valves pass a quality check under the supervision of experts to ensure their flawlessness at users' end.   These valves are manufactured using the optimum grade raw material and cutting edge technology under the supervision of our skilled professionals. Furthermore, the products offered by us are checked by our quality controllers. In addition to this, our prestigious clients can avail these products from us at the most leading price.   These are suitable for high-pressure applications.Line mounted ball valves are available to 11/2BSP ports.Sub plate mounted ball valves to popular European interfaces are available.Valve body is steel/SS.Seats are lubricated POM and balls are stainless steel. Owing to our client centric approach, we offer quality products at industry leading prices ordered consignments within the stipulated time frame.     Features:* Rust resistance * Robust design * High * Seamless finish * Corrosion resistance * Longer service life   

• Pressure: 1.6N
• Size: 50mm - 400mm
• Brand Name: Dasmesh
• Color: Blue
• End Connection Type: Flange
• Body Material: Cast Iron

• Material: Cast Iron
• Brand Name: Durga & Kartar
• Color: Blue, Black
• Size: 50 to 500 mm
• Automation Grade: Manual
• Pressure (psi): 10 & 16 kg

• Valve Size: 3/4"
• Brand Name: Yuken
• Size: 3/4"BSP(F)
• Model: BT 06
• Pressure: 210 Bar
• Port Size: 3/4"BSP
• I deal in: New Only
• Minimum Order Quantity: 1 Piece

• STANDARDS: ASME, BS/DIN and IBR codes.
• DESIGN AND TESTED: as per API-526/527.

Relief valve opens automatically, relieving system pressure to prevent over pressurization of a system. Process pressure acts against the bottom of the disc. As pressure exceeds the setpoint for the valve, established by a spring in most cases, the disk is pushed upward. When system pressure returns below the valve's setpoint, the spring push back the of the disc forcing it shut. By adjusting the tension on the spring, the setpoint can be adjusted.

• Type: Gate Valves
• Material: Alloy Steel, Carbon Steel, Forged Steel, Stainless Steel
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Weight: 10-15kg, 15-20kg, 20-25kg, 25-30kg, 30-35kg, 35-40kg, 40-45kg, 45-50kg, 5-10kg
• Color: Black, Grey, Sky Blue, White
• Condition: New, Used
• Pressure: High, Low
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality, Investment Casting

• Pressure: High
• Country of Origin: Made in India
• End Connection Type: Flanged
• Media: Water
• Temperature Of Media: Low Temperature, Medium Temperature
• I Deal In: New Only

• Material: Carbon Steel and SS
• Weight: 9.5 kg
• Flow Rate: Up to 13,000 m3/h (7,650 cfm)
• Application: Cement silo

• Type: Metal Seat, Resilient Seat with or without Deflection Cones
• Material: Cast Iron, Cast Carbon and Stainless Steel
• Design Standard: MSS - SP -81
• Rating: PN 6, PN 10, PN 16, 150#
• Ends: Wafer, Two Lug, Lugged, Flanged to ANSI / BS / Din
• Accessories: Chain Wheel, Gear or Pneumatic Actuator

Indian Single Cast, Rugged, Heavy Duty body provides corrosion and abrasion resistance on the toughest liquid slurry and dry material handling application. Indian High Performance Uni-Directional / Bi-Directional Knife Edge Gate Valve provide better value and performance with many standard features not found in other, commodity Knife Edge Gate Valve. Indian Knife Edge Gate Valves are available in different combination of Body, Seat & Gate material.  Machine ground ultra thick gate and lapped integral / renewable seat are designed to handle dense mixture of stock, and slurries.  A wide variety of hardened trim options are available on gate, seat ring and deflection cone to perform in critical services. Indian Knife Edge Gate Valves are full port design for greater flow capacity and minimal pressure drop.

With the assistance of our team of professionals, we are engaged in manufacturing, exporting and supplying a wide range of Gate Valves. These are fabricated using high grade factor inputs as per the latest technological advancements to meet the international quality standards. Some of the salient features of these valves are corrosion resistance, high performance, accurate dimensions and longer service life. Further, our offered range is available in various specifications and can be customized as per the specific requirements of the clients.

high tensile iron pipes, Actuator ball valve, Steam Traps

ibr valves, Ms Pipe, gi pipe boiler tubes, seam less pipes, Flanges, BENDS

Dual displacement motor, Fixed Displacement Pump, Vane Pumps

Fittings, irrigation products

Ball Valves

Angle Check Valves, Forged Steel Socket Weld Fittings, ceramic magnets

Gun Metal Valve, Stainless Steel Tin Rods, Lead Coils, CR Coils

Foot Valves, Double Beat Valves, Pulp Valves, Sluice Valves, Air Valves

Spring Loaded Check Valves, GI Pipe Clamps, drill taps, ANABOND

Fittings, Ferrous Metals, Railing Pipes

Pressure Controlled Valves, Lift-o-mat- Non Locking Gas Spring

Sluice Valves, Water Meter

High Pressure Pneumatic Valve, tandem pumps, Compact Pneumatic Cylinders

Ball Valves, Dual Plate Check Valves