Blow Valves Dealers

• Material: Stainless Steel
• Condition: New
• Pressure: High
• Application: Industrial

As we know the value of quality raw materials, we source them only from dependable vendors. By applying such inputs, we make sure that our finished goods remain flawless. As a trustworthy supplier, we take pride in presenting our customers with excellent quality Blow Poppet Valve. Pneumatically piston operated Blow Poppet Valve, which is used in pneumatic conveying system for suppling purging air into the ash translation & Hopers.Sizes : 25NB 40NB 50NB 100NB.

This Emergency Shut-Off control device is so designed that it can be easily used in any tanker trucklorry with lever. Its fitting and cleaning be simple and easy

A steam boiler evaporates liquid water to form steam, or gaseous water; and requires frequent replenishment of boiler feedwater for the continuous production of steam required by most boiler applications. Water is a capable solvent, and will dissolve small amounts of solids from piping and containers including the boiler. Continuing evaporation of steam concentrates dissolved impurities until they reach levels potentially damaging to steam production within the boiler. Without blowdown, impurities would reach saturation levels and begin to precipitate within the boiler. Impurity concentrations are highest where steam is being produced near heat exchange surfaces. Precipitation would be expected to occur in the form of scale deposits on those heat exchange surfaces. Scale deposits thermally insulate heat exchange surfaces initially decreasing the rate of steam generation, and potentially causing boiler metals to reach failure temperatures. We carry a ready stock of Gestra , Spirax , Flowserve & equi to  all other reputed brand of valves. We manufacture all type of blowdown & condensate recovery systems ( continuos & intermediate ).

• Type: One Way Pop Action
• Conn.Sizes: 1/4 inch 1 inch [NPT / BST (F)]
• Relief Pressure: Various Pressure Ranges available adjustable to required set point
• MoC: Brass / SS 304
• Brand Name: VISHAL

Features Used at the downstream of a pressure regulator to protect the system from over-pressure. Wide array of springs to meet majority of application requirements. Provision to match blow down ring & disc in case, the relief pressure is to be re-set for proper popping. Simple design ensuring long life & functional reliability.

• Packaging Type: Wooden Box
• Specialities: Heat Resistance, Durable
• Type: Poppet Valve
• Material: Metal
• Condition: New
• Finishing: Polished

25 Nb to 80 Nb

Located in Punjab, India, we are manufacturing, exporting & supplying Steel Parallel Slide Blow Off Valves in India and abroad. Available with us in different specifications, Our Valves have no comparison. With our spacious storage depot, we can easily furnish small as well as bulk requirements at a time. Buyers can Place orders with us and expect timely deliveries of the same.   Details Pressure / Class Rating : Class - 300 Body Material Cum Std. : Cast Steel (ASTM A 216 Gr. WCB) Product Description : Rack and Pinion Operated With Key Type of Seat : Stellited Type of Disc : SS (ASTM A276 Type 410) Trim : SS (ASTM A276 Type 410) + Stellited, Spring Steel (IBR) Gasket : C.A.F. End Details : Flanges as per B16.5 CL-300 F.F. (Drilled) Test Pressure : Body : 700 PSIG (Hyd.) Seat : 700 PSIG (Hyd.)

• Material: Cast Steel
• Size: 25MM
• Corrosion Resistance: Yes
• Tensile Strength: 200-300 MPa
• Hardness: 60-70 HRC

• Country of Origin: Made in India
• Color: Black
• Brand: Atlas Copco
• Weight: 1 kg
• Packaging Type: Box
• Max Pressure: 15 Bar

• Size: 25 mm - 80 mm
• Material: Stainless Steel
• Temprature: 428 Degree F

• Country of Origin: India
• Size: #150/ #300/ #600
• Material: Carbon Steel
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• Pressure: High
• Brand Name: HAMA

• Pressure: Low
• Application: Automobile

we are dealing pressur sensor , pressure transducer , pressure switch , temperature sensor , solinoid valve , blow off valve and compressor parts and all others segments - etc 

• Material: Alloy
• Pressure: Medium Pressure
• Structure: Control
• Power: Manual
• Brand Name: Qinn
• Supply Ability: 150 Piece/Pieces per Month
• Model Number: Q-116 And Q-303
• Standard or Nonstandard: Standard
• Lead Time: 45 to 60 days

• Brand Name: Floster
• Body: ASTM A 216 GR. WCB
• Gland: Ductile Iron
• Rack: ASTM A 351 GR. CA 15 (13% Cr.)
• Pinion: ASTM A 351 GR. CA 15 (13% Cr.)
• Disc: ASTM A 351 GR. CA 15 (13% Cr.)
• Seat: ASTM A 351 GR. CA 15 (13% Cr.)
• Gasket: S.S. Spiral Wound With CAF/Grafoil
• Gland Packing: Grafoil Ring
• Stud & Nut: ASTM A 193 GR. B7/ A 194 GR. 2H/S.S. 304/316
• MOC: Cast Steel (Gr. WCB)
• Mode of Connection: Flanged End
• Model Number: IBR Blow Down Valve
• Operation: Manual

• Type: Continuous Blow Down Valve, Intermittent Blow Down valve
• Brand Name: IndiTech Valves Private Limited
• Material: Carbon Steel, Alloy Steel
• Pressure: Upto 220 bar
• Media: Water & Steam
• Temperature Of Media: Saturated
• Model Number: IVPL- IBDV, IVPL- CBDV
• Place of Origin: PUNE, INDIA

The primary function of a blowdown valve is to control the concentrations of suspended & total dissolved solids (tds) in the boiler. Boiler blowdown is a severe service application which results in rapid erosion and wearing out of conventional valves. Continuous blowdown (cbd) valves are designed to operate in continuous open position by releasing water continuously through a blowdown tap near the boiler water surface, thereby maintaining the tds level in the boiler drum. Inditech continuous blowdown valve is an angle type valve with a needle shaped trim in a venturi diffuser. The venturi diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow.

• Size: 1.1/2inch, 1/2inch, 1inch, 2inch
• Material: Carbon Steeel, Carbon Steel, Cast Steel
• Certification: ISO 9001:2008 Certified
• Application: Industrial
• Color: White
• Pressure: High, Medium
• Number Of Way: 2way
• Brand Name: UTVC make

blow down valve utvc make continuous blow down valve is an angle type valve with a needle shaped trim in a venture diffuser. The venture diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow.   utvc make intermittent blow down (non ibr) valves are designed to operate at predetermined intervals by releasing water & accumulated sludge periodically through a blow down tap near the bottom of the boiler

• Material: Cast Iron
• Valve Size: 8-700 mm
• Surface Finish: Polished
• Brand: Flowtech
• Actuator: Pneumatic

• Material: Cast Steel
• Application: Industrial
• Color: Silver
• Pressure: High
• Feature: Heat Resistance, Non Breakable
• Thickness: 3mm to 5mm

The company is enlisted among the topmost Manufacturer, Exporter and Supplier of Cast Steel Blow Off Valves in India. Our Pin – Point High Performance Cast Steel Blow Off Valves are available in different sizes. Blow Off Valve offered by us, fabricated with high grade steel to provide high efficiency and durability. Our Cast Steel Blow Off Valves are accurately dimensioned by expertise. Our Blow Off Valves are available at lowest prices in the market.Technical Details : WJ" Cast Steel Parallel Slide Blow off Valves Rack and Pinion operated are manufactured with flanged ends as per BS – 10 Table 'J' Maximum Boiler operating Pressure of 350 PSIG (24.6 kg /  Cm2) at 800 of (425oC) temp These Valves are tested at 700 Psig. (49.2 kg / Cm2) Hyd. Pressure Salient Features : Parallel Slide Valve maintains fluid tightness and ease of operation without the aid of wedging action. Discs are kept in close contact with body seat rings by means of a spring when the valve is not under pressure. Slide Valve action removes all foreign matter from the faces of seats. Valve is operated by means of rack and pinion Arrangement in such a manner that the valve is opened fully with half turn of the box key. Gland forms a locking guard whick prevents the removal of key unless the valve is closed. Testing and Certification : All Valves are tested at double the max. Working pressure. Each valve is supplied with IBR test Certificate in form III-C issued by the Director of Boilers, Punjab.

Blow through valves have been designed for controlled discharging of powders materials from Silos, bins, hoppers, cyclones into low medium pressure pneumatic conveying line.

• Material: Cast Steel
• End Connection: Flanged End
• Item Code: PV-205
• Usage/Application: Water
• Size: 32mm

• Material: CAST STEEL
• SIZE RANGE: 1, 1 1/2 INCH
• Body Styles: End connections Welded or Threaded Ends
• Pressure Class: up to 6000PSIG or PN680
• END CONNECTIONS: FLANGED
• END FLANGES: ANSI B - 16.5, B.S.10 TABLE - J
• FACE TO FACE: ANSI B - 16.10
• WORKING PRESSURE: CLASS 300 - 52.02 Kg/sq.cm.
• TESTING PRESSURE: CLASS 300 - 104.04 Kg/sq.cm. HYDRAULIC
• MANUFACTURING STANDARDS: API 602
• TESTING STANDARDS: BS 6755 PART - I

The Blow-Through feeders has been used for many years in flour handling systems and non-abrasive material conveying systems in large bakeries, flour-mills etc. Being an integral part of the pipe line, Blow-Through Feeder allows the material into a pressure pneumatic conveying system in a very simple and positive way. Feeders in this services has limited range of application involving products which are relatively non-abrasive such as flour, finely ground coating clays, koalins etc.  

Specification & Features:Flanged Ends To BS - 10 Table 'J'.It maintains fluid tightness and is easy in operation because of parallel slidingaction of discs. Operation: Spring keeps the disc in parallel position and disc removes any dust or deposits from the bodyrings. Hence low torque is required to operate the valve. Rack and Pinion arrangement enables to open / close in half turn.