Integrated Engineers & Contractors Rai, Sonipat, Haryana

Power Source : AC Single Phase

Material : MS

Stainless steel plate heat exchanger Designed for refrigeration and AC duties, BHE's handle HCFC, HFC, HC and CO2 refrigerants. As dry expansion evaporator, they feature integrated flow equalization for maximum cooling performance. Three models are equipped with double refrigerant circuits. Temperature range - 100oC to 200oC; pressure in excess of 40 bar.

Material : Stainless Steel

We introduce ourselves as the key refrigerated air dryer manufacturer, importer and supplier. Our refrigerated air dryer works upon the theory “cooling is the best possible solution to remove moisture from the compressed air”. The refrigerated air dryer consists of close-loop freon circuit in which the condensed moisture is separated by chilling the compressed fluid at a controlled temperature. In order to prevent condensed moisture freezing, air or gas can be chilled to a minimum temperature of 2-3oc approx i.e. The dew point of dried fluid at operating pressure 7 kgf/cm2 g is (+) 2oc and its corresponding atmospheric dew point would be (-) 22oc (approx). Our refrigerated air dryer is suitable for the applications where the maximum dew point of (-) 20 to (-) 22oc (atm.) is normally acceptable. features excellent moisture removal provides clean and dry air high performance highly durable

Brand Name : IEC

Condition : Good

We introduce ourselves as the key Refrigerated Air Dryer Manufacturer, Importer and Supplier. Our Refrigerated Air Dryer works upon the theory �Cooling is the best possible solution to remove moisture from the compressed air�. The Refrigerated Air Dryer consists of close-loop Freon circuit in which the condensed moisture is separated by chilling the compressed fluid at a controlled temperature. In order to prevent condensed moisture freezing, air or gas can be chilled to a minimum temperature of 2-3oC approx i.e. the dew point of dried fluid at operating pressure 7 kgf/Cm2 g is (+) 2oC and its corresponding atmospheric dew point would be (-) 22oC (approx). Our Refrigerated Air Dryer is suitable for the applications where the maximum dew point of (-) 20 to (-) 22oC (Atm.) is normally acceptable. Features Excellent moisture removal Provides clean and dry air High performance Highly durable

Brand Name : IEC

Condition : Good

Air / Gas Receivers / Pressure Vessels:The receivers are available in horizontal as well as vertical installation. Standard supply is vertical installation. All following capacities are at a pressure of 12.0 bar.

We are ranked amongst the major Manufacturers, Importers and Suppliers of the superlative Pressure Vessels. The Pressure Vessels are also known as Air and Gas Receivers. Our Pressure Vessels are made up of the finest materials to provide higher efficiency. The Pressure Vessels are available in both vertical and horizontal installation. Features Sturdy construction Corrosion resistance High durability Efficient working

Brand Name : IEC

Material : Finest materials

Feature : Sturdy construction,Corrosion resistance,High durability,Efficient working

Condition : Good

We are ranked amongst the major Manufacturers, Importers and Suppliers of the superlative Pressure Vessels. The Pressure Vessels are also known as Air and Gas Receivers. Our Pressure Vessels are made up of the finest materials to provide higher efficiency. The Pressure Vessels are available in both vertical and horizontal installation. Features Sturdy construction Corrosion resistance High durability Efficient working  

Brand Name : IEC

Material : Finest raw materials

Feature : Sturdy construction,Corrosion resistance,High durability,Efficient working

Condition : Good

We are offering pneumatic tools that are made up of the finest quality raw materials. Our pneumatic tools are fabricated by the experts in compliance with the set industrial standards. We offer a comprehensive range of pneumatic tools at affordable prices to the clients, widely spread all over the india. features finest material higher efficiency robust construction great strength .

Brand Name : IEC

Material : Finest quality raw materials

Condition : Good

The company is the leading Manufacturer, Importer and Supplier of the premium Pneumatic Tools that are made up of the finest quality raw materials. Our Pneumatic Tools are fabricated by the experts in compliance with the set industrial standards. We offer a comprehensive range of Pneumatic Tools at affordable prices to the clients, widely spread all over the India. Features Finest material Higher efficiency Robust construction Great strength

Brand Name : IEC

Material : Finest quality raw materials.

Condition : Good

We are offering pneumatic components manufacturer, importer and supplier based in india. Our professionals precisely design the pneumatic components to provide higher efficiency. Thorough research work is done to offer the latest pneumatic components that are available in the current market. The clients can avail pneumatic components at reasonable prices. components / accessories pneumatic cylinders solenoid/manual valves filter/regulator/lubricator unit pu tubes and coils special purpose pneumatic m/c ball/gate/needle valves pressure gauges pneumatic/electronic timers pneumatic fittings .

We are a leading Pneumatic Components Manufacturer, Importer and Supplier based in India. Our professionals precisely design the Pneumatic Components to provide higher efficiency. Thorough research work is done to offer the latest Pneumatic Components that are available in the current market. The clients can avail Pneumatic Components at reasonable prices. Components / Accessories Pneumatic Cylinders Solenoid/Manual Valves Filter/Regulator/Lubricator Unit PU tubes and coils Special Purpose Pneumatic M/c Ball/Gate/Needle Valves Pressure Gauges Pneumatic/Electronic Timers Pneumatic Fittings

Product Name : Pneumatic Components

Brand Name : IEC

Feature : Pneumatic Cylinders,Special Purpose Pneumatic M/c,PU tubes and coils,Pneumatic Fittings

Condition : Good

Place of Origin : Delhi,Sonipat

Type : Plate

Phe plate Three models are equipped with double refrigerant circuits. Temperature range - 100oC to 200oC; pressure in excess of 40 bar.

Brand : Alfa Laval

Material : Stainless Steel, Titanium

Finishing : Polished

Condition : New

Power : 80-120 Kw

Application : Industrial Use

Voltage : Non power

Working Pressure : 1-15 Bar

Type : Phe Plate

Country of Origin : India

temperatures : 1-250 Deg C

We introduce ourselves as the reputed Industrial Strainers Manufacturer, Importer and Supplier of the premium Industrial Strainers. Our Industrial Strainers are available in a wide variety. The Industrial Strainers aid to remove foreign particles from the flowing services. The company offers Industrial Strainers at competitive prices to the clients. Range Y Industrial Strainers T Industrial Strainers Basket Industrial Strainers Duplex Industrial Strainers

Brand Name : IEC

Type : Y Industrial Strainers,T Industrial Strainers,Basket Industrial Strainers,Duplex Industrial Strainer

Country of Origin : Delhi,Sonipat

We introduce ourselves as the reputed Industrial Strainers Manufacturer, Importer and Supplier of the premium Industrial Strainers. Our Industrial Strainers are available in a wide variety. The Industrial Strainers aid to remove foreign particles from the flowing services. The company offers Industrial Strainers at competitive prices to the clients. Range Y Industrial Strainers T Industrial Strainers Basket Industrial Strainers Duplex Industrial Strainers

Brand Name : IEC

Type : Y Industrial Strainers,T Industrial Strainers,Basket Industrial Strainers,Duplex Industrial Strainer

Country of Origin : Delhi,Sonipat

The company is ranked amidst the chief hermetic chillers manufacturers, importers and suppliers in india. Our hermetic chillers is made up of strong and trustworthy hermetic compressors from copeland. Our hermetic chillers are highly durable and provides efficient performance. We offer hermetic chillers at reasonable prices to the clients. salient features offered with up to 3 nos. Hermetic compressors in one machine individual refrigeration circuits option of using cfc free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank these chillers are also rated for an ambient of up to (+) 45oc. appropriate for process cooling applications that varies from (+) 20oc up to (-) 15oc operating voltages 380 / 400 volt ac / 50 hz 460 volt ac / 50hz 380 volt ac / 60 hz 460 volt ac / 60 hz technical specifications

Brand Name : IEC

The company is ranked amidst the chief Hermetic Chillers Manufacturers, Importers and Suppliers in India. Our Hermetic Chillers is made up of strong and trustworthy hermetic compressors from Copeland. Our Hermetic Chillers are highly durable and provides efficient performance. We offer Hermetic Chillers at reasonable prices to the clients. Salient Features Offered with up to 3 Nos. hermetic compressors in one machine Individual Refrigeration Circuits Option of using CFC free refrigerants R-407C & R-134a Complete with in-built Process pump and stainless steel chilled water expansion tank These chillers are also rated for an ambient of up to (+) 45oC. Appropriate for process cooling applications that varies from (+) 20oC up to (-) 15oC Operating Voltages 380 / 400 Volt AC / 50 HZ 460 Volt AC / 50HZ 380 Volt AC / 60 HZ 460 Volt AC / 60 HZ Technical Specifications <? include("other-files/table.html"); ?>  

Brand Name : IEC

Material : Finest quality raw material

We are amongst the chief Heatless Adsorption Air Dryer Manufacturers, Importers and Suppliers based in India. Our Heatless Adsorption Air Dryer is based upon the natural phenomenon of �Desiccant�, which allows establishing equilibrium with the surroundings. In Heatless Adsorption Air Dryer, wet Air (fluid) is cycled automatically between two desiccant towers. One tower adsorbs the moisture from the wet fluid, while the other being regenerated. The wet fluid enters the first tower and it passes through the desiccant bed where the saturated moisture is absorbed. Afterwards, a small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of fantastic dry air, which have dew points up to (-) 70oC (Atm.)

Heatless type Dryer takes advantage of the natural phenomenon of desiccant to establish equilibrium with their surrondings. In this type, wet Air (fluid) is cycled automatically between two desiccant towers, one adsorbing the moisture from the wet fluid, while the other being regenerated. The wet fluid enters one tower, passes through the desiccant bed where the saturated moisture is absorbed. A small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of super dry air having dew points up to (-) 70oC(Atm.)Other Type of Absorption Dryers available are: Embedded Internal Heat Adsorption Dryer. Blower Heat Regenerated No Loss Adsorption Dryer. Split Flow No Loss Adsorption Type Dryer. Heat of Compression No Loss Absorption Dryer.

We are amongst the chief heatless adsorption air dryer manufacturers, importers and suppliers based in india. Our heatless adsorption air dryer is based upon the natural phenomenon of “desiccant”, which allows establishing equilibrium with the surroundings. In heatless adsorption air dryer, wet air (fluid) is cycled automatically between two desiccant towers. One tower adsorbs the moisture from the wet fluid, while the other being regenerated. The wet fluid enters the first tower and it passes through the desiccant bed where the saturated moisture is absorbed. Afterwards, a small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of fantastic dry air, which have dew points up to (-) 70oc (atm.) types embedded internal heat adsorption dryer. split flow no loss adsorption type dryer. heat of compression no loss absorption dryer. blower heat regenerated no loss adsorption dryer.

Brand Name : IEC

Condition : Good

We are amongst the chief Heatless Adsorption Air Dryer Manufacturers, Importers and Suppliers based in India. Our Heatless Adsorption Air Dryer is based upon the natural phenomenon of �Desiccant�, which allows establishing equilibrium with the surroundings. In Heatless Adsorption Air Dryer, wet Air (fluid) is cycled automatically between two desiccant towers. One tower adsorbs the moisture from the wet fluid, while the other being regenerated. The wet fluid enters the first tower and it passes through the desiccant bed where the saturated moisture is absorbed. Afterwards, a small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of fantastic dry air, which have dew points up to (-) 70oC (Atm.) Types Embedded Internal Heat Adsorption Dryer. Split Flow No Loss Adsorption Type Dryer. Heat of Compression No Loss Absorption Dryer. Blower Heat Regenerated No Loss Adsorption Dryer.

Brand Name : IEC

Condition : Good

Type : Embedded Internal Heat Adsorption Dryer,Split Flow No Loss Adsorption Type Dryer.

A heat exchanger is a device used to transfer heat from one fluid to another while preventing the two from intermingling. The three main types are shell and tube heat exchangers, air-cooled finned tube heat exchangers and plate heat exchangers. Generally, there is a metal wall partitioned between the two fluids that acts as a conductor. A hot solution flowing on one side of the barrier transfers its heat to a cooler solution flowing on the other side. Thermal energy only flows from the hotter to the cooler in an attempt to reach equilibrium. The surface area of a heat exchanger affects its speed and efficiency; the larger a heat exchanger's surface area, the faster and more efficient the heat transfer.Heat exchangers are typically constructed of steel, titanium, copper, bronze, stainless steel, aluminum or cast iron. One of the biggest problems heat exchanger manufactures have to prevent is corrosion, which common due to the constant flowing of liquid. Unfortunately, this is very difficult to avoid. To help prevent this, tubing must be resistant to general corrosion, pitting, stress-corrosion cracking (SCC), selective leaching and oxygen cell attack in service. Some heat exchanger designs use fins to provide greater thermal conductivity, which also helps.Weather in commercial or industrial use, heat exchangers are vital as energy and money saving devices since most mechanical, chemical and energy systems requires heat transferal of some sort.Custom heat exchangers perform a crucial role in the design, operation and maintenance of heating and air-conditioning systems, vehicle design, power plants, refrigeration, chemical and industrial engineering systems. They are also important in settings such as food processing, industrial engineering processes, pharmaceutical pulp and paper and the steel industry. All power generation industries need them. Other industries that use heat exchangers include aerospace, chemical, marine, semiconductor, petrochemical, electronic, automotive, water treatment facilities and textiles. Heat exchangers are useful to almost everyone.IEC Make Shell & Tube Heat Exchangers remains the industry standard in ultimate value and long-term reliability. This proven fixed & floating tube sheet shell & tube heat exchanger offers the cost effectiveness that comes with having a highly standard design, while easily providing for various options to meet specific customer requirements.Sizes: 3" to 30" diameter; 12" to 192" length, Shells: Carbon Steel or 304 Stainless Steel, Tubes: 1/4", 3/8", 5/8", 3/4" & 1" diameter tubes available in Copper, Admiralty, 90/10 Cu Ni or 304 S/S. Straight tube or U-Tube configurations, Baffles: Precision punched Carbon Steel, Brass or 304 S/S, Heads: Cast heads available in iron, 304 S/S or bronze; Fabricated heads available in Steel, 304 S/S or 90/10 Cu-Ni. Flow: Available in 1-pass, 2-pass and 4-pass designs. Codes: Commercial Standard (non-code) ASME-TEMA-C, IS-2825.

We are one of the key Manufacturers, Importers and Suppliers of the finest Dehumidifiers. The Dehumidifiers is used to prevent the equipment and raw materials from the harmful effects of humidity. The Dehumidifiers are widely used by the clients to serve their various purposes and can be availed at the market leading prices. Applications Eye Hospitals Offices Pharmaceuticals Art Galleries Hotels Advantages To protect laser sensitive equipment More productivity Quality of the documents maintained and life enhanced Printing errors reduced thus reduced wastages and more efficiency Adherence to standards Better shelf life of products Effectiveness and efficiency of machines maintained To enhance the life and appearance of the paintings Enhanced guest experience and lower room maintenance cost Technical Specifications <? include("other-files/12.html"); ?>  

Brand Name : IEC

Condition : Good