Weighing Scale Motherboard
700 Per Piece
50 Piece (MOQ)
0.0
Website
Bitmain S19K Pro 110TH Antminer
125,000 - 135,000 Per Piece
1 Piece (MOQ)
The Model Antminer S19K Pro (115Th) from Bitmain mines Bitcoin on the SHA-256 algorithm with a maximum hashrate of 115Th/s for a power consumption of 2760W. SPECIFICATIONS Manufacturer Bitmain Model Antminer S19K Pro (115Th) First release September 2023 Mineable coins Bitcoin (BTC), Joulecoin (XJO), Peercoin (PPC), eMark (DEM), Acoin (ACOIN), Curecoin (CURE), Unbreakable (UNB), Crown (CRW), Terracoin (TRC) and others Algorithm SHA-256 Size 195 x 290 x 370 mm Weight 13.2 Kg Noise level 75 db Fan(s) 4 Power 2760 W Voltage 12 V Interface Ethernet Temperature 5 - 45 °C Humidity 5 - 95 %
Best Deals from Computer Parts
IP67 400 x 400 x 160 mm PC ABS Enclosure
1,150 Per Piece
4 Piece (MOQ)
Solid State Drives
Get Price Quote
ATX Motherboard IMB502
Get Price Quote
1 Piece (MOQ)
0.0
Website
Fingers PC Case
2,000 - 5,000 Per Piece
1 Piece (MOQ)
EXT-04 USB Extension Board
250 Per piece
100 piece (MOQ)
Siemens 6ES7331-7KB02-0AB0 Simatic S7-300 Analog input
399 Per Piece
1 Piece (MOQ)
Computer Motherboard
3,200 - 4,000 Per Set
10 Set (MOQ)
0.0
Website
Wallmount Chassis
Get Price Quote
Wallmount Chassis external drive bays, one 3.5" internal drive bay, and an 8-slot ISAPICMG Bus Passive Backplane. Both full-size and half-size CPU cards are supported.
Universal Device Programmer
Get Price Quote
SUPERPRO/580U USB Interfaced Ultra-High Speed Universal Device ProgrammerFEATURESSupports 18100+ devices from up to 118 IC manufacturers including EPROM, EEPROM and Flash Memory, PIC, AVR and other popular microcontrollers and PLDs.Programs high-density Flash memory devices at near theoreticalminimum programming times.Standard 48 pin universal pin-drivers come with universal package adapters to support all type of devices in same package with a single adapter. No adapters are needed for DIL devices. Universal adapters ensure rapid algorithm update. Device-specific adapters are also available for devices above 48 pins that are amounted on DIL48 module. Down to 1.5V low voltage devices are supported directly thanks to the DAC controlled I/O levels.Advanced hardware features minimized Bounce noise. Only IC manufacturers approved algorithms are adopted. High yield rates are guaranteed for all devices including low voltage, critical and second-hand devices. ±5% and ±10% Vcc Verification promises programming reliability.Supports 13200+ devices from up to 90 IC manufacturers including MEMORY, MCU, PLD.Free life-time software update.Pin continuity and wrong chip insertion check prevent chips from accident damage.Over-current and over-voltage protection for programmer hardware.Standard TTL/CMOS logic ICs and user-defined logic ICs can be tested and recognized.Software supports WINDOWS 98/ME/NT/2000/XP.Operator friendly control software combines many powerful functions with ease of use. Project minimizes the whole process of device selection, file loading, device configuration setting, operation option, batch file setting etc. to a single step. History of device selection and file loading simplify operation. Batch command combines device operations like. program, verify, security into a single command at any sequence. Auto-Start start Batch command automatically as soon as the chip is detected to be inserted in the socket properly. Serial number can be generated and programmed into devices automatically in anyway customer specified. The correct device type will be suggested according to the actual ID read when a mistake type is selected. With help of the open API user can even change the buffer content from chip to chip. Recognizes file formats and detects large file offset automatically.SpecificationsDevice Support :EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration Serial PROM, FLASH Memory, NOR and NAND, BPROM, NVRAM, PLD, Firmware HUB, Microcontroller, MCU, Standard Logic.Package Support :DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP,TSOP, TSOPII, SOP, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, µBGA, CSP, SCSP etc.PC Interface : USBStandard Package : Main unit, DIL48 Module, AC adapter, CD-ROM, User's Guide, USB Cable.Option Accessories : Package Adapter.
12V Power Adaptor
35 - 42 Per
100 Pieces (MOQ)
Microprocessor Photo Digital Colorimeter
14,000 Per Piece
1 Piece (MOQ)
SANDHYAFLEX Expansion Joint Filler Board
335 - 350 Per piece
Expansion joint filler boards are materials used in construction to fill and bridge the gaps or joints between two structures or components. These joints allow for the natural movement, expansion, and contraction of structures due to temperature changes, settling, or other factors. Here are some common features and characteristics of expansion joint filler boards: 1. **Flexibility:** Expansion joint filler boards are designed to be flexible, allowing them to accommodate movement and changes in the structure without causing damage. 2. **Compressive Strength:** The filler boards should possess sufficient compressive strength to support the weight and loads imposed on them, ensuring durability and longevity. 3. **Dimensional Stability:** Filler boards should maintain their dimensions and shape over time, resisting deformation or compression under various environmental conditions. 4. **Resistance to Chemicals:** Some filler boards are formulated to resist the effects of chemicals, moisture, and other environmental factors to ensure their long-term performance. 5. **Thermal Insulation:** Some expansion joint filler boards provide thermal insulation, helping to reduce heat transfer between structures and providing energy efficiency benefits. 6. **Water Resistance:** Water-resistant filler boards prevent the infiltration of water into the joint, protecting the underlying structure from water damage. 7. **Easy Installation:** Filler boards should be easy to handle and install, allowing for efficient construction processes. 8. **Compatibility with Sealants:** Expansion joint filler boards are often used in conjunction with sealants to create a complete and effective joint system. They should be compatible with the sealant materials used. 9. **Non-corrosive:** The material should be resistant to corrosion, ensuring that it does not degrade or compromise the structural integrity of the joint or surrounding materials. 10. **Elasticity:** The filler board should possess a degree of elasticity to accommodate dynamic movements without losing its effectiveness. 11. **Fire Resistance:** In some applications, fire-resistant expansion joint filler boards may be required to enhance the overall fire safety of the structure. 12. **Density:** The density of the filler board may vary depending on the specific application and requirements of the joint. 13. **Durability:** Expansion joint filler boards are expected to have a long service life, providing reliable performance over an extended period. It's important to note that the specific features of expansion joint filler boards can vary based on the material used, such as foam, rubber, cork, or other composite materials. The choice of filler board depends on the type of construction, the anticipated movements, and the environmental conditions the joint will be exposed to.
Assorted 6 Socket Extension Board
Get Price Quote
100 piece (MOQ)
Spindle Fan
7,500 Per Piece
10 Piece (MOQ)
Multi Point Extension Board With USB Port
450 - 500 Per Piece
50 Piece (MOQ)
Single Phase Industrial Round Extension Board
30,000 Per Piece
1 Piece (MOQ)
6 USB and 3 Socket Extension Board
1,050 - 1,060 Per Piece
50 Piece (MOQ)
Rack Mount Computers
5,000 - 6,000 Per Piece
10 Piece (MOQ)
Wall mount cabinet for computer cpu
SM 1221 Siemens Digital Input Module
15,000 Per Piece
1 Piece (MOQ)
Audient Id4 Usb Audio Interface
15,000 - 16,000 Per piece
1 Piece (MOQ)
On Table Vehicle Remote Programmer
18,500 Per Piece
1 Piece (MOQ)
Laptop Motherboard
Get Price Quote
Frontech G31 Ddr2 Ram X 2 / 775 Socket Motherboard Ft-0463
2,900 - 3,000 Per
10 Piece (MOQ)
Frontech G31 Ddr2 Ram X 2 / 775 Socket Motherboard Ft-0463
Rackmount PC
25,000 - 45,000 Per Piece
1 pcs (MOQ)
HX39N2170WTS Loyyed LED Tv Motherboard
3,500 Per Piece
100 Piece (MOQ)
0.0
Website
Panel IPC
Get Price Quote
1 Piece (MOQ)
Intel ® Celeron® processor J1900 Quad Core 2.0GHz (BGA on-board), 15" 4:3 1024x768, 500 cd/m2 2x DDR3L SO-DIMM, 1x 2.5" SSD space, 2x Intel I210IT LAN ports, 1x VGA, 1x Line-out, 2x miniPCIe socket, 1x CFast socket, 1x USB3.0, 2x USB2.0, 2x RS232/422/485, 12~30V DC input. Pre-install One 4G DDR3L SO-DIMM memory.
AMD 7000 Series Ryzen 9 7950X 3D Desktop Processor
65,850 Per Piece
10 Piece (MOQ)
AMD 7000 Series Ryzen 9 7950X 3D Desktop Processor 16 cores 32 Threads 144 MB Cache 4.2 GHz Upto 5.7 GHz Socket AM5 (100-100000908WOF)
Post Free Ad
